2002-2008 Cupra Born SUV Opening and closing -> Set of vehicle keys User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Opening and closing -> Set of vehicle keys for Your Cupra Born SUV First Generation (2002-2008)

Opening and closing  
The vehicle key includes an emitter and bat-  
tery. The receiver is in the interior of the ve-  
hicle. The range of the vehicle key with re-  
mote control and new battery is several metres  
around the vehicle.  
The vehicle keys or new spare keys can be  
obtained from a specialised CUPRA dealer or  
SEAT Oꢁicial Service, a specialised workshop  
or an approved key service qualiꢂed to create  
this kind of key.  
Opening and closing  
Set of vehicle keys  
Vehicle key  
If it is not possible to open or close the vehicle  
using the remote control key, this should be  
re-synchronised ››› page 92 or the battery  
changed ››› page 91.  
New keys or spare keys must be synchronised  
before use ››› page 92.  
WARNING  
Diꢁerent keys belonging to the vehicle may be  
used.  
●
Never leave children or disabled persons in  
the vehicle. In case of emergency, they may  
not be able to leave the vehicle or manage on  
their own.  
Control lamp on the vehicle key  
●
An uncontrolled use of the key by third  
When a button is pressed brieꢀy on the vehicle  
parties could activate a piece of electrical  
equipment (e.g. electric windows), with the  
resulting accident hazard. The doors can be  
locked using the remote control key. This  
could become an obstacle for assistance in  
an emergency situation.  
4
key, the control lamp  
››› Fig. 78 ꢀashes  
once brieꢀy, but if pressed for a long period of  
time, it will ꢀash several times, for example, in  
the convenience opening.  
Fig. 78 Vehicle key  
1
2
3
Unlock the vehicle  
Lock the vehicle  
If the vehicle key control lamp does not light up  
when the button is pressed, replace the key's  
●
Never forget the keys inside the vehicle. An  
battery ››› page 91.  
unauthorised use of your vehicle could result  
in injury, damage or theft. Therefore always  
take the key with you when you leave the ve-  
hicle.  
Unlock only the rear lid.  
Press the button until all the turn signals  
on the vehicle ꢀash brieꢀy.  
You have 2 minutes to open the rear lid.  
Once this time has passed, it will lock  
again. In addition, the lamp on the key  
ꢀashes.  
Spare key  
To obtain a spare key and other vehicle keys,  
the vehicle chassis number is required.  
NOTICE  
Each new key contains a microchip which must  
be coded with the data from the vehicle elec-  
tronic immobiliser. A vehicle key will not work  
if it does not contain a microchip or the micro-  
chip has not been encoded. This is also true  
for keys which are specially cut for the vehicle.  
All of the vehicle keys contain electronic  
components. Protect them from damage,  
impacts and humidity.  
4
Control lamp  
The vehicle can be locked and unlocked from a  
distance using the vehicle key ››› page 95.  
90  
Setof vehiclekeys
Pull out the key blade  
Changing the battery  
Note  
●
Only use the key button when you re-  
quire the corresponding function. Pushing  
the button unnecessarily could accidentally  
unlock the vehicle or trigger the alarm. It is  
also possible even when you are outside the  
radius of action.  
●
Key operation can be greatly inꢀuenced by  
overlapping radio signals close to the vehicle  
working in the same range of frequencies,  
for example, radio transmitters or mobile tel-  
ephones.  
Fig. 80 Vehicle key: open the battery  
compartment cover.  
Fig. 79 Vehicle key: remove the key shaft.  
●
Obstacles between the remote control and  
the vehicle, bad weather conditions and dis-  
charged batteries can considerably reduce  
the range of the remote control.  
The central locking remote control has the  
key blade inside it for use in case of emer-  
gency locking/unlocking of the driver's door  
●
If the buttons of the vehicle key are  
pressed or one of the central locking but-  
››› page 99.  
tons ››› page 96 is pressed repeatedly in  
short succession, the central locking brieꢀy  
disconnects as protection against overload-  
ing. The vehicle is then unlocked. Lock it if  
necessary.  
●
1
Press the ››› Fig. 79  
button to release the  
ring from the key fob and remove the key blade  
2
. Pressing lightly on the ring leaves it ꢂxed as  
a key fob.  
●
1
Press the ››› Fig. 79  
button to unlock.  
and at the same  
●
Spare remote control keys are available at  
1
Press and hold button  
your Technical Service, where they must be  
matched to the locking system.  
time pull on the ring in the direction of arrow  
Fig. 81 Vehicle key: removing the battery.  
2
››› Fig. 79 to completely remove the key  
shaft.  
CUPRA recommends you ask a specialised  
workshop to replace the battery.  
The battery is located to the rear of the vehicle  
key, under a cover.  
91  

Related Topics

Popular Owner Manuals