2020-2024 Cupra Formentor SUV Practical tips -> Refuelling User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical tips -> Refuelling for Your Cupra Formentor SUV First Generation (2020-2024)

High-voltage battery  
2
3
The maximum charging current is 16 or 32  
amps, depending on the vehicle’s features  
Control lamp of the protection device  
Control lamp of the vehicle  
Failure warning lamp  
Charging cable for power sockets  
3 Valid for: hybrid vehicles  
and the charging cable that is supplied  
.
›››  
4
WARNING  
Charging cable information  
Charging the high-voltage battery with an  
inappropriate charging cable could cause  
short circuits, serious injuries and fatal  
electrical shocks.  
Before using the charging cable, also follow  
the instructions displayed on it and on the  
rear of the protective device.  
Protection device  
WARNING  
The electronic protection device Fig. 200  
›››  
The charging cable should not be used as  
an extension lead. The charging process  
could be affected.  
ensures that the charging connector does  
not receive current until it is plugged in to  
the vehicle's charging connector.  
Fig. 199 Charging cable for electrical  
sockets  
CAUTION  
Self-check  
Follow the manufacturer’s instructions and  
indications when using the charging sta-  
tion.  
When the charging cable is plugged into the  
electrical socket, the protective device auto-  
matically performs a self-test. During this  
check, all warning and indicator lamps turn  
on briefly and go out one after the other.  
Upon completion, the operational status at  
that time is displayed.  
Note  
Charging with a 16 A charging cable is not  
possible in some charging stations that  
support 32 A. This depends on the features  
of the charging station.  
Operating displays  
One or more indicator lamps Fig. 200  
Fig. 200 On the charging cable for power  
sockets: Indicator lamps on the protection  
device.  
Before charging the vehicle, find out  
1
,
›››  
about the available charging technology.  
»
2
3
or  
light up green.  
Fig. 200:  
›››  
1
Indicator lamp of the connector and the  
power supply.  
313  
Battery  
4
starts slowly flashing green. Warning lamp  
starts slowly flashing red.  
Check the instructions located on the back  
of the protective devices.  
Display Fig. 200 Meaning  
›››  
The charging cable is plug-  
Seek professional assistance if the fault  
persists.  
Unplug the charging cable and let it cool  
down.  
ged into the mains but has  
not been connected to the  
vehicle.  
1
on  
If the error occurs again, seek professional  
Note  
1
2
3
assistance.  
,
on,  
flashes  
on  
The high-voltage battery is  
charging.  
slowlya)  
If there is any other mains connection dur-  
ing the charging process, or if the vehicle is  
right next to the high voltage cables, charg-  
ing from an electrical socket is not possible  
in some cases. Additional mains connec-  
tions:  
If charging continues with a lower charging  
current, warning lamp  
addition to the status indicator. The charging  
cable must be allowed to cool down for a  
while. The charging current automatically in-  
creases again.  
The charging process is  
complete. The high-voltage  
battery has charged.  
4
lights up in red in  
1
2
3
,
and  
a)  
The available supply voltage depends on each  
country.  
Connecting a 12 volt battery charger.  
Contact with a work tool connect to the  
Set the charging current  
Fault display  
4
mains, such as a vehicle lift.  
The charging cable limits the charging cur-  
rent according to the available power supply.  
If the red warning light  
flashes or turns on  
without one of the indicator lamps  
1
2
3
Fig. 200  
,
or  
also turning on con-  
›››  
If the local mains supply does not allow  
charging at the maximum charging current,  
the charging current can be reduced, de-  
pending on the charging setting features in  
tinuously on the status indicator, there is a  
fault.  
Display Fig. 200 Meaning  
›››  
the infotainment system page 305 .  
›››  
1
4
4
4
flashes,  
flashing  
on or  
on or  
on or  
Failure in the power supply.  
Temperature control  
The charging cable temperature control  
switches on when the charging cable over-  
heats, such as when it has been stored in a  
luggage compartment exposed to high tem-  
peratures or strong sunlight.  
2
flashes,  
flashing  
Failure in the protection de-  
vice.  
3
flashes,  
Failure in the vehicle.  
flashing  
When the charging process is interrupted,  
the status indicator that is lit up at the time  
switches off and one of the indicator lamps  
The charging process pauses or is cancelled.  
314  

Related Topics

Popular Owner Manuals