2020-2024 Cupra Formentor SUV Safety -> Seat belt tensioners User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Seat belt tensioners for Your Cupra Formentor SUV First Generation (2020-2024)

Seat belts  
The lap part of the seat belt must lie across  
the pelvis, never across the stomach.  
The belt tensioners are activated by sensors,  
although only in severe head-on, lateral and  
rear-end collisions, or in the event of the ve-  
hicle overturning in the plug-in hybrid ver-  
sion of the vehicle.  
pelvis and always lie flat, “surrounding” the  
stomach Fig. 12 .  
›››  
Do not twist the seat belt while it is fas-  
The seat belt must lie flat and fit comforta-  
bly. Pull the belt tight if necessary to take up  
any slack.  
tened.  
Once the seat belt is positioned correctly,  
This retracts and tightens the seat belts, re-  
ducing the forward motion of the occupants.  
don't pull it away from your body with your  
hand.  
In the case of pregnant women, the seat  
belt must lie evenly across the chest and as  
low as possible over the pelvis, never across  
the stomach and must be worn properly at  
Do not lie the seat belt across rigid or  
The belt pre-tensioners work in combination  
with the airbag system. The belt pre-tension-  
ers activate in combination with some of the  
airbags, depending on the collision type.  
fragile objects, e.g. glasses, pens or keys.  
Never use seat belt clips, retaining rings  
all times during the pregnancy Fig. 12 .  
›››  
or similar instruments to alter the position  
of the belt webbing.  
Adapting the position of the belt webbing  
to your size  
Note  
Note  
If the seat belt tensioners are triggered, a  
The position of the seat belt can be adapted  
by adjusting the height of the front seats.  
fine dust is produced. This is normal and it  
is not an indication of fire in the vehicle.  
If your physical constitution prevents you  
from maintaining the correct position of  
the belt webbing, contact a specialised  
workshop for help with any special devices  
to ensure the optimum protection of the  
seat belt and airbag. CUPRA recommends  
taking your car in for technical service.  
WARNING  
The relevant safety requirements must be  
observed when the vehicle or components  
of the system are scrapped. Specialised  
workshops are familiar with these regula-  
tions, which are also available to you.  
An incorrectly worn seat belt web can  
cause severe or fatal injuries in the event of  
an accident.  
The shoulder part of the seat belt must  
lie on the centre of the shoulder, never  
across the neck or the arm.  
Maintenance and disposal of seat  
belt tensioners  
The seat belt must lie flat and fit comfort-  
Seat belt tensioners  
ably on the torso  
The lap part of the seat belt must lie  
How the seat belt tensioner  
works  
The belt tensioners are components of the  
seat belts that are installed in the seats of  
your vehicle. If you work on the belt tension-  
ers or remove and install parts of the system  
when performing other repair work, the seat  
belt may be damaged. The consequence  
across the pelvis, never across the stomach.  
The seat belt must lie flat and fit comforta-  
bly on the pelvis Pull the belt tight if neces-  
sary to take up any slack.  
The seat belts for the front seats and the side  
rear seats are equipped with belt tensioners.  
For pregnant women, the lap part of the  
»
seat belt must lie as low as possible over the  
21  

Related Topics

Popular Owner Manuals