Data transfer
Special characteristics
all function button to close all the open
vide Internet to the devices connected to
applications.
the hotspot (WLAN client) page 186 .
›››
During an active MirrorLink® connection, the
following characteristics are applicable:
Press to display the mobile phone de-
vice screen on the infotainment system
screen.
Note
●
An active MirrorLink® device can be con-
●
Data transmission may incur charges.
nected to the infotainment system at the
same time via Bluetooth®.
Due to the high volume of data exchanged,
CUPRA recommends the use of a flat rate
tariff for data transmission. Mobile phone
operators can provide the relevant infor-
mation.
To open the MirrorLink® settings.
Press to return to the MirrorLink® main
menu.
●
If the MirrorLink® device is connected to
the infotainment system via Bluetooth®, the
telephone function of the infotainment sys-
tem can be used.
Note
●
The exchange of data packages may gen-
●
You will find information about technical
requirements, compatible mobile phone
devices, certified applications and their
availability on the CUPRA and MirrorLink®
websites, at specialised CUPRA deal-
ers/SEAT network dealers.
erate additional costs, depending on your
mobile phone rate, particularly if you are
abroad (for example, roaming rates).
You cannot use an active MirrorLink® de-
vice as a multimedia device in the Media
main menu.
●
On the instrument panel screen you can
view data from the Telephone mode.
Configuration for sharing a con-
nection over WLAN
●
The instrument panel screen does not dis-
play any indication to turn or the Media
mode.
Establishing the connection with the wire-
less network (WLAN)
WLAN access point
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
●
●
Press the Settings button.
Introduction
Activate the wireless network. To do this,
3 Not available on vehicles without CUPRA
CONNECT and without navigation
Function buttons
press the function button Wi-Fi > Infotain-
ment system as hotspot.
Function buttons and their function:
The infotainment system can be used to
share a WLAN connection with up to 8 devi-
●
Activate the wireless network (WLAN) on
APP Return the Full Link main menu. Here
you can end the MirrorLink® connec-
tion, connect another mobile phone
device or select another technology.
the device that is to be connected. If neces-
sary, refer to the manufacturer’s instruction
manual.
ces page 185, Configuration for sharing
›››
a connection over WLAN.
The infotainment system can also use the
WLAN hotspot of an external device to pro-
●
Activate the mobile device assignment in
Press to close the open apps. Then
press the apps to be closed or the Close
»
the infotainment system. To do this, press
185
English 
