2024-2026 Cupra Terramar SUV Data transmissions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Data transmissions for Your Cupra Terramar SUV First Generation (2024-2026)

264
Data transmissions
1)
Not available in all markets.
Data transmissions
Over-the-air update
Introduction
Over-the-air updates allow you to always
keep your vehicle up to date, for example for
optimising functions and for malware pro-
tection.
1)
How can you nd out when an over-the-air
update is available?
The available updates are displayed in the info-
tainment system.
If several updates are available for the vehicle
at the same time, one over-the-air update
must rst be successfully completed before
the next one can be performed.
Note
Over-the-air updates require your vehicle's
connectivity to be enabled.
It is in your own interest to complete updates
as soon as possible. If the controller repeat-
edly rejects the over-the-air update, it will
be necessary to visit a qualied workshop.
CUPRA recommends using a CUPRA dealer.
WARNING
In very rare cases, a control unit may not
function properly after an over-the-air up-
date. Malfunctioning of a control unit and the
vehicle can lead to serious accidents and fa-
tal injuries.
●
Reduce speed in a controlled manner if the
vehicle operates or reacts dierently than
usual while driving.
●
Contact a specialised workshop. CUPRA
recommends using a CUPRA dealer.
WARNING
If the instrument cluster does not work after
an over-the-air update, you will not be able
to see instrument cluster displays, warning
lights, symbols or text messages. Driving with
an instrument cluster that does not work can
lead to serious accidents and fatal injuries.
●
Do not use the vehicle. Please contact the
CUPRA customer care service.
NOTICE
If special modications have been made
to vehicles outside the scope of CUPRA's
responsibility (for example, for emergency
service vehicles or taxis), there is a risk that
special functions (e.g. the taximeter) may no
longer work properly after an over-the-air
update.
●
Consult with your CUPRA dealer before
performing an over-the-air update.
Note
●
Measures to improve performance or ef-
ciency (e.g. engine tuning) that have not
been incorporated by CUPRA may be deleted
after an over-the-air update.
●
Depending on the equipment, release
notes may appear once before or after an
over-the-air update. These release notes de-
scribe changes to the vehicle status. For re-
lease notes and more information on over-
the-air updates, please visit the website:
wners/cupra-
connect/ota-updates
●
The over-the-air update will not update
apps installed in the vehicle.
●
Certain information, such as your VIN (ve-
hicle identication number), may be shared
with the brand to ensure that each of these
campaigns is successful. These updates will
require your nal conrmation before instal-
lation. If you do not wish to receive them,
you can change your privacy to
Incognito
(maximum privacy) mode in the privacy and
services settings ›››page274.
Data transmissions
265
Over-the-air update
Prerequisites for an over-the-air
update
The following prerequisites must be met to al-
low an update to be downloaded via satellite
and to install the update software.
●
The over-the-air update function is available
in your country.
●
The vehicle is located in an area with sui-
cient mobile reception.
●
Your current privacy conguration allows you
to transmit and receive data and information
›››page274.
●
The vehicle's 12-volt battery is properly
charged.
Download and install an over-the-
air update
Download costs
Over-the-air updates are downloaded via the
factory control unit with eSIM card, and are
free of charge. CUPRA covers the cost of the
connection.
Download timing
Downloading takes place automatically with-
out warning and may also happen while driv-
ing. When the download is complete, a mes-
sage will appear to inform you that an over-
the-air update is available.
Note
The duration of the download process de-
pends on the quality of the network, the le
size and the type of update. The download
process may be interrupted. It will resume
when the ignition is switched on again.
Software installation pre-requisites
●
The vehicle is parked safely in accordance
with legal requirements and local regulations
›››page225.
●
Previous over-the-air updates have been in-
stalled.
Installing the software from an over-the-air
update
Choose a time for the over-the-air update
when neither you nor others are likely to be
driving the vehicle.
WARNING
The control units will be switched o and will
not work while the software installation is in
progress. Driving while the control units are
switched o or faulty can lead to accidents
and fatal injuries.
●
Install the software in a way that does not
interfere with other road users.
●
Do not use the vehicle during a software
installation procedure.
1. Deactivate the vehicle's drive system and
apply the electronic parking brake.
2. Close the bonnet, luggage compartment,
all windows and all doors.
3. Conrm the software installation in the In-
fotainment system.
4. Ensure that all vehicle occupants get out
and that there are no animals left inside.
5. Collect all vehicle keys and get out.
6. Lock the vehicle.
Functional restrictions during software in-
stallation
The control units, central computer, functions
and displays will not be available during the
software installation. Do not use the vehicle or
the Infotainment system during installation.
●
The system prevents the activation of the ve-
hicle's drive system.
●
The high-voltage battery is not charged.
●
The AUX-IN diagnostic socket is switched
o.
●
The anti-theft alarm is switched o.
●
The “Safe” security system is switched o.
After installing the software
After the software installation and before acti-
vating the vehicle's drive system, read the mes-
sage on the Infotainment system or in the In-
strument cluster about the complete installa-
266
Data transmissions
1)
Not available in all markets.
tion of the software. It can take up to 1 minute
for the vehicle to display the status of the over-
the-air update.
●
The vehicle's drive system can be activated
once the software has been successfully instal-
led.
●
If the software installation is not successful:
›››page266, Troubleshooting.
Troubleshooting
The installation of an over-the-air update
has failed.
●
If an update is not installed correctly, an
error message will appear in the infotainment
system or in the instrument cluster. Observe
the corresponding messages and warnings.
Note
The control units will stop working or will not
work properly in the event of a critical instal-
lation error. The functions and screens will
not be available until the error is amended.
Do not use the vehicle. In this case, please
contact CUPRA customer care.
Can I interrupt the installation of an over-
the-air update?
Not possible.
What happens if the installation of an over-
the-air update is interrupted?
If the installation is interrupted, for example
due to damage to the vehicle's electrical sys-
tem, the control units may not be updated and
may not work due to incomplete installation of
the update.
Car2X communication
Introduction
How Car2X works
1)
Car2X enables communication between sev-
eral vehicles, as well as between vehicles and
the road infrastructure (hereinafter referred to
as “participants”) in the vicinity. Communica-
tion between the participants is established
in accordance with Car2X and WLAN (Wi-
Fi) standards, regardless of the manufacturer.
Car2X only works in some countries.
When Car2X is connected, data are transmit-
ted permanently between the participants, re-
gardless of whether their vehicles are in online
or oline mode.
To prevent misuse and to sign Car2X data with
changing IDs, Car2X data transmitters must
have valid certicates. This means that each of
the recipients can check that the Car2X data
are authentic and that they come from a legiti-
mate participant.
The vehicle’s own certicates can only be re-
newed automatically in online mode.
To update the Car2X certicates to ensure
that Car2X remains active, activate the Online
mode in the vehicle at least once a month.
Continuously changing provisional Car2X data
IDs minimises the probability that the data that
is sent can be linked to you personally.
Meaning of the symbol
Indicates that the connected Car2X also
sends and receives data in Oline mode.
Data transmissions
When Car2X is connected, the following data
are sent and received via the Car2X antennas:
●
Vehicle data such as speed.
●
Position data.
●
Data about incidents, e.g. accidents.
Note
Further information on data processing can
be found in the Legal notice menu in the
infotainment system and on the CUPRA web-
site.
Data transmissions
267
Car2X communication
Car2X limits
Data exchange
Your vehicle's Car2X only communicates with
those participants that are equipped with
compatible and operational Car2X technology.
Participants with deactivated, faulty or non-
compatible Car2X are not picked up.
Range
Depending on weather conditions and the sur-
roundings, Car2X participants can communi-
cate within a range of up to approx. 800m. Not
all Car2X-based functions use the full possible
range.
Limited operation
Car2X operations may be limited in the follow-
ing cases:
●
Environmental conditions prevent the partic-
ipant from receiving data.
●
The use of a trailer or accessories added to
the vehicle may prevent the participant from
receiving data.
●
The incident in question is not picked up as
such by participants.
WARNING
Car2X cannot replace the driver’s attention
and works only within the limits of the sys-
tem. Car2X cannot detect all hazardous sit-
uations and may fail to warn or give a delayed
warning. If you rely solely on Car2X technol-
ogy, you risk causing an accident and serious
or even fatal injuries.
●
Pay attention to the traic at all times while
driving and always be ready to intervene.
●
Always adapt your driving style to the cur-
rent visibility, weather, road and traic con-
ditions.
Switching Car2X on and o
Connecting
●
Access the Privacy settings menu.
●
Activate Car2X.
Manual disconnection
●
Access the Privacy settings menu.
●
Disconnect Car2X.
Automatic disconnection
Car2X may switch o automatically in some ca-
ses ›››
page269, Troubleshooting. Once the
reason that it switched o automatically has
been rectied, Car2X will reconnect automati-
cally.
WARNING
When Car2X is active, the limit values for
electromagnetic radiation outside the vehi-
cle may be exceeded. High limit values of
electromagnetic radiation can threaten the
health of people with active medical implants
such as pacemakers. The Car2X antennas are
located on the roof of the vehicle and, if nec-
essary, in the interior mirror triangle on the
windscreen.
●
Outside the vehicle, remain at a distance
of 20cm (8 inches) from the activated Car2X
antennas.
●
Deactivate Car2X immediately if it is sus-
pected of causing interference with an ac-
tive medical implant (e.g. pacemaker) or any
other medical device.
268
Data transmissions
Local hazard warning
Fig.173 Graphical representation: local hazard
warning due to daytime or mobile works.
The local hazard warning uses the connected
Car2X and gives warnings, depending on the
situation, of hazard points in the surrounding
area. This can prevent accidents and improve
traic ow.
Hazard points send data
When other participants receive Car2X data,
you may be warned of the following hazard
points:
Accident ahead.
Emergency vehicle attending. This warn-
ing is supplemented by a symbol indicat-
ing the direction from which the emer-
gency vehicle is approaching.
Direction from which the emergency
service vehicle is approaching, e.g. from
the rear.
End of queue ahead.
Intervention of an assistance system on a
vehicle that is ahead.
Stopped or broken down vehicle ahead.
Works ahead.
Display of a local hazard warning
Depending on the type of hazard, speed and
the vehicle’s deceleration, a warning will be
given of a signicant hazard as follows:
●
Audio warning.
●
Information or warning message (symbol in
yellow or red depending on the proximity of
the hazard).
Hide the displayed hazard warning
Press the
button on the multifunction steer-
ing wheel.
Data transmissions
269
CUPRA CONNECT
1)
Not available in all markets.
WARNING
Ignoring hazard warnings can result in acci-
dents and serious injury.
●
Never ignore hazard warnings.
Troubleshooting
Car2X switches o automatically
●
Car2X is not allowed in the country you are
driving in.
●
The vehicle has been oline for a long time
and therefore the certicates have not been
updated. Congure the privacy settings so that
an Internet connection is established and cer-
ticates can be updated.
●
There is a fault in the system. Contact a spe-
cialised workshop.
No Car2X data is displayed
●
Car2X has limited operation.
●
There are no participants sending data in the
surrounding area.
●
There are participants sending data in the
surrounding area, but they are not relevant to
your vehicle.
●
The Car2X antennas are blocked by accesso-
ries or parts that cover them. Keep the area
surrounding the Car2X antennas free of obsta-
cles.
●
Data exchange between participants is re-
duced or impossible due to weather condi-
tions.
●
The driver has already reacted to the hazard-
ous situation ahead.
CUPRA CONNECT
Introduction
Access CUPRA CONNECT
1)
digital services by
connecting your vehicle to the Internet. A de-
scription of the available services can be found
on the Internet at:
ao
cupra-connect
To use CUPRA CONNECT, you have to activate
the services by concluding a CONNECT con-
tract with SEAT, S.A., which may be subject
to usage time limitations, depending on the
country.
Both the CUPRA CONNECT service portfolios
oered by CUPRA and individual services can
be modied, cancelled, deactivated, reactiva-
ted, renamed and extended, even without
prior notication.
The implementation and availability of all
CUPRA CONNECT services and service portfo-
lios may vary by country, as well as by vehicle
and its equipment.
CUPRA CONNECT's voice recognition or
search technology does not recognise or oer
results for all words.
There are CUPRA CONNECT services for which
registration is mandatory and others for which
it is not mandatory.
Description of services
Before running CUPRA CONNECT services,
read and take into account the description of
the corresponding services. Descriptions are
updated from time to time.
●
Always use the most up-to-date version of
the corresponding service description.
WARNING
In areas with insuicient mobile phone and
GPS coverage, emergency calls and phone
calls will not be connected and data cannot
be transmitted.
●
Change location if possible.
270
Data transmissions
1)
Some services may be subject to special equipment.
2)
The above services may be subject to a subscription period.
NOTICE
The vehicle may be damaged by factors out-
side CUPRA’s control, specically including:
●
Misuse of mobile terminals
●
Data loss during transmission.
●
Unsuitable or defective third party applica-
tions.
●
Malicious software on data storage devices,
computers, tablets or mobile phones.
Services portfolio
The initial service assignment shown here rep-
resents the maximum possible volume. The
maximum possible volume is only available on
a few vehicle models. During the useful life of
the vehicle, you can change the assignment
shown here.
After activating service management in the
infotainment system, you can check whether
services are available for the vehicle and what
services they are ›››
page273.
In some countries and in the event of a
contract renewal, the services oered may
be combined dierently than indicated here.
They may also vary depending on the year
of production of the vehicle. The afore-
mentioned services correspond to CUPRA
CONNECT.
CUPRA CONNECT services
If you vehicle is tted with Media System + or
Navi System +, your online services package is
CUPRA CONNECT. The following services are
included
1)
:
●
Breakdown call.
●
Customer care.
●
Service appointment planning.
●
Customisation.
●
Remote heating and ventilation.
●
Remote unlock.
●
Horn and turn signals.
●
Vehicle status incl. doors and lights.
●
Driving data.
●
Vehicle health report.
●
Anti-theft alarm warning.
●
Zone notication.
●
Speed notication.
●
Online map update.
●
Natural voice control for destinations and
addresses.
●
Internet radio.
●
Online route import.
●
Online destination import.
●
Parking position.
●
Data package.
●
Online Store.
●
Online navigation: Dynamic Points of Interest
●
Online system update.
If your vehicle is tted with Navi System +, it
also has the CUPRA CONNECT PLUS online
services package. The included services are all
the CUPRA CONNECT services in the previous
section plus
2)
:
●
Search for public car parks.
●
Search for petrol stations.
●
Online route calculation.
●
Online traic information.
CUPRA CONNECT services for hybrid vehi-
cles
Available only in hybrid vehicles.
The included services are all the CUPRA
CONNECT services in the previous section
plus:
●
Remote air conditioning.
●
Electrical power manager.
●
Remote vehicle charging.
●
Search for charging stations.
Data transmissions
271
CUPRA CONNECT
CUPRA CONNECT individual options
●
In-Car Applications. These applications can
be purchased and installed directly on the in-
fotainment system through the Online Store,
provided they are available. Access to the On-
line Store is only possible if the vehicle is
equipped with a navigation system.
●
Data package. Pay per use data rates for the
use of online functions, for example, 2 GB per
month.
Note
●
The public emergency call service is avail-
able regardless of whether the infotainment
system is logged in.
●
Customisation and purchase of in-car Apps
require logging in to the Infotainment sys-
tem and activating the vehicle in a CUPRA
CONNECT account.
Activating CUPRA CONNECT and
S-PIN
The following steps are required to activate
CUPRA CONNECT (including registration):
1. Switch on the ignition and the infotainment
system.
2. Change the privacy mode to “Tracking”
›››
page274.
3. Select: > Users and press the button
to add a new user.
4. Follow the on-screen instructions to down-
load the My CUPRA App.
5. Follow the instructions to create your
CUPRA ID.
6. Accept the Privacy Policy.
7. Enter the vehicle identication number
(VIN) to add the vehicle to your user ac-
count.
8. Check your personal details.
9. Select your CUPRA CONNECT online serv-
ices pack.
10. Open the app and scan the new QR code
generated by the infotainment system.
S-PIN
The S-PIN is a sequence of several digits, which
can be selected when the CUPRA CONNECT
registration is completed.
When creating the S-PIN, avoid easy-to-guess
number sequences and known dates of birth.
You can change the S-PIN in the CUPRA
CONNECT user account in Account settings.
The S-PIN is necessary, for example, to protect
your user prole or to run a CUPRA CONNECT
service related to the security of your vehicle.
You must keep this S-PIN strictly condential. If
you reveal the S-PIN to third parties, for secur-
ity reasons you must change it immediately.
Ownership and identity accredita-
tion
Become primary user
To become a primary user and thus prove own-
ership of the vehicle, you need both of the ve-
hicle’s physical keys. Ownership accreditation
takes place in the vehicle during registration or,
if you already have a CUPRA CONNECT user
account, you must log in through the infotain-
ment system and then go to Manage users.
●
Switch on the ignition and the infotainment
system.
●
In the infotainment system, register in
CUPRA CONNECT.
Or: open the menu Users > Settings >
Become primary user and follow the instruc-
tions.
●
Press the unlock button on the rst vehicle
key.
●
Press the unlock button on the second vehi-
cle key.
Once the infotainment system has processed
the orders by radiofrequency, the accredita-
tion of the ownership will have been comple-
ted.
How is ownership accredited?
Infotainment 2-Key method
My CUPRA App Not possible
272
Data transmissions
Identity accreditation (CUPRA ID)
Identity accreditation must be completed be-
fore you can use CUPRA CONNECT services
that are relevant to security, such as the Re-
mote Opening service. The identity verica-
tion can be carried out at a specialised CUPRA
dealership with the assistance of a brand spe-
cialist or independently and online via the My
CUPRA App.
Legal provisions
When using CUPRA CONNECT services, infor-
mation is transferred and processed online
through the vehicle. Such data can also pro-
vide (at least indirectly) information about the
driver in question, for example, driving behav-
iour and location. As a contracting party in the
CUPRA CONNECT contract with SEAT, S.A.,
you must ensure that when your vehicle is
used by other drivers (for example, family or
friends), data protection and personal rights
are respected. Therefore, you must inform
drivers in advance that the vehicle transfers
and receives data online, and that you can ac-
cess such data.
Not taking into account this obligation to in-
form, can infringe certain rights of the occu-
pants.
Follow-up services: ask all occupants
The follow-up services need geographical and
vehicle data to determine whether the vehi-
cle is being used within dened speed ranges,
where it has been parked or if it is being used
in an established geographical area. This infor-
mation is displayed in the My CUPRA App.
Therefore, before moving o, ask all the vehi-
cle occupants if they agree with the activated
services. If they do not, deactivate the service
in question (if possible) or do not allow the
occupants to use the vehicle.
GPS tracking: marking
If the vehicle has a factory-assembled control
unit that transmits the its current geographical
position and speed, the vehicle usually has this
GPS marking (e.g., on the roof console). The
absence of the marking on the vehicle does
not guarantee that the control unit does not
transmit the vehicle’s current geographical po-
sition and speed.
Personal information
CUPRA protects your personal data and only
uses them, as long as the law allows it or you
have given your consent on the occasion of a
use. Detailed information on data processing
in connection with the CUPRA CONNECT serv-
ices can be found in the Data Protection Dec-
laration, the current version of which can be
accessed on the CUPRA website.
Permanent transfer of the vehicle
If the vehicle has been purchased used or
someone else has left the vehicle to you
for permanent use, CUPRA CONNECT may al-
ready be activated and the previous primary
user may still be able to access the data regis-
tered via CUPRA CONNECT and control certain
functions of your vehicle.
You can automatically remove the previous pri-
mary user by registering yourself as the primary
user of the vehicle. Alternatively, you can re-
store the infotainment system to factory set-
tings (
> Restore factory settings) or set the
vehicle to “Privacy” mode (maximum privacy)
and therefore limit both your vehicle's commu-
nication with the CUPRA data service and the
processing of personal and vehicle data.
Deactivating CUPRA CONNECT
services
The following functions are available to ac-
tivate and deactivate the CUPRA CONNECT
services:
●
Allow or prevent data transmissions through
the infotainment system ›››page273, Pri-
vacy mode.
●
Whenever possible: individual deactivation
or activation ›››page273.
You can run the relevant services again after
cancelling their deactivation.
Data transmissions
273
Privacy mode
Note
The services required by law and their data
transmission cannot be disconnected or de-
activated, for example, the emergency call
system (eCall).
Faults
Even if the prerequisites for the use of CUPRA
CONNECT services are met, there may be fac-
tors beyond the control of CUPRA that inter-
fere with the execution of such services or pre-
vent them. specically including:
●
Maintenance, repair, deactivation, software
update and technical expansion of telecom-
munication equipment, satellites, servers and
data banks.
●
Change of the mobile telephony standard for
mobile data transmission by the telecommuni-
cations service provider, e.g. from LTE or UMTS
to EDGE or GPRS.
●
Disconnection of an existing mobile phone
standard by the telecommunications service
provider.
●
Interference, disturbance or interruption of
mobile and GPS signal reception due to as-
pects such as high speed driving, solar storms,
meteorological inuences, topography, jam-
ming equipment and intensive mobile phone
use in the radio cells in question.
●
When in areas with zero or insuicient mo-
bile telephony or GPS signal. Also, for exam-
ple, in tunnels, conned areas between very
tall buildings, garages, underpasses, mountains
and valleys.
●
External information from third party suppli-
ers available with limitations, incomplete or in-
correct, e.g. representations of maps.
●
Countries and regions where CUPRA
CONNECT is not oered.
Service management
Open the settings in Users and go to Privacy
settings and services. You can do the follow-
ing in the infotainment system:
●
Check which CUPRA CONNECT services are
currently available in the vehicle.
●
View the number of CUPRA CONNECT serv-
ices that are activated or deactivated.
●
Activate or deactivate CUPRA CONNECT
services.
Note
If you deactivate all CUPRA CONNECT serv-
ices, the vehicle can still transmit emergency
call (eCall) data.
Privacy mode
Introduction
With the “Privacy” function, data transmissions
between the vehicle and the Internet can be
allowed or blocked.
Please note that your vehicle is connected by
default, so that it can receive remote updates
that improve the performance of your vehicle.
Certain information, such as your VIN (vehicle
identication number), may be shared with the
brand to ensure that each of these campaigns
is successful. These updates will require your
nal conrmation before installation. If you
do not wish to receive them, you can change
your privacy to
Incognito (maximum pri-
vacy) mode in the privacy and services settings
›››page274.
The desired mode can be set in Users > Set-
tings > Privacy and Services.
Data transmission by external devices and their
communication with the vehicle cannot be
blocked using the “Privacy” function.
The services required by law and their data
transmission cannot be disconnected or deac-
tivated, for example, the emergency call sys-
tem (eCall).
274
Data transmissions
no icon
Note
Please note that all vehicle users can cong-
ure individual settings in the “Privacy” func-
tion. These settings may not match those de-
sired by the vehicle owner.
Privacy and services settings
CUPRA CONNECT services can be activated
and deactivated individually. To do this, just
check the box corresponding to the service
you want to activate or deactivate. Use the pri-
vacy mode option if you want to deactivate all
of the services at the same time.
Privacy mode.
Allows you to deactivate or activate the serv-
ices depending on the selected privacy level.
Tracking
Share location. Primary users
and co-users can view position
data on the My CUPRA App.
Location
Use location. Position, vehicle,
and user data are used for serv-
ices.
Personal
No location. Only the vehicle
data and user data are used for
services.
Privacy
Maximum privacy. Your serv-
ices are disabled. Only services
required for legal reasons use
data.
Setting options are not available in all markets
or in all vehicle models.
Connectivity status indication
The following symbols indicate the respective
data transmission status in the infotainment
system.
Symbol white: full connectivity, all serv-
ices available
Symbol grey: limited connectivity, some
services may not be available.
No connectivity, no services available.
User administration
User role description
Both the owner of the vehicle, and any
other user who has access to the vehicle will
be authorised to order and activate CUPRA
CONNECT services for a specic vehicle.
Each vehicle only has one main user, as well
as one anonymous guest user and up to 4 ad-
ditional or secondary users. The dierent roles
are described below:
●
Primary user: A user registered in the vehi-
cle who completes the enrolment process by
activating CUPRA CONNECT services (via the
two-key method or pairing code) to become
the primary user. He or she is the only one that
can make online purchases (data and other
services). He or she has access to all vehicle
services.
●
Additional user: a user registered in the ve-
hicle who has not completed the enrolment
process and is not the primary user. Through
the vehicle’s infotainment system, the addi-
tional user has access to the same services as
the main user, except those that require mak-
ing a purchase. Additional users do not have
access to in-App services.
●
Secondary user: the primary user can invite
an additional user to become a secondary
user, so that they can enjoy all services avail-
able to the primary user except those related
to purchasing and receiving alerts. The invita-
tion is sent from the vehicle user management
menu in the app and must be accepted by the
additional user invited to become a secondary
user.
●
Guest user: the only role that is always pres-
ent in the vehicle, if you don't want to register
as a main or additional user. When selecting
this mode for the rst time, or each time you
switch from a primary or additional user to a
guest user, data is shared online so that re-
mote updates can be received. If you do not
wish to receive them, you can change the pri-
vacy to “Oline Mode” (maximum privacy) in
the privacy settings ›››
page274.
Data transmissions
275
WLAN access point
1)
Not available in all markets.
Create and delete a user role
Create a user
Register for CUPRA CONNECT. You can then
sign a CUPRA CONNECT contract with CUPRA,
add the vehicle to your user account and fol-
low the steps in the app to register yourself as a
new main user or as an additional user.
Delete a user
To delete the main user, restore the factory
settings of the infotainment system. If you want
to delete an additional user, the main user may
delete it manually, or the additional user can
delete himself/herself.
Note
If the infotainment system is restored to fac-
tory settings in oline mode, the user cannot
be deleted on the server.
WLAN access point
Introduction
The infotainment system can be used to share
a WLAN
1)
connection with up to 8 devices
›››
page275, Conguration for sharing a
connection over WLAN.
The infotainment system can also use the
WLAN hotspot of an external device to provide
Internet to the devices connected to the hot-
spot (WLAN client) ›››
page276.
Note
●
There may be a charge for the required
data transmission. Due to the high volume
of data exchanged, CUPRA recommends the
use of a at rate tari for data transmission.
Mobile phone operators can provide infor-
mation on this. You can also purchase data
plans for your vehicle on the Cubic website:
●
Exchanging data packages and purchasing
them from third parties may generate ad-
ditional costs, depending on your mobile
phone rate, particularly if you are abroad (for
example, roaming rates).
Conguration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the HOME > button.
●
Activate the wireless network. To do this, tap
the function button Network > Wi-Fi > Info-
tainment system as hotspot.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in
the infotainment system. To do this, press the
function button Use as hotspot and check the
checkbox.
●
Enter and conrm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Network key: Network key generated auto-
matically. Press the function button to change
the network key manually. The network key
must have at least 12 characters and a maxi-
mum of 62.
●
SSID: Name of the WLAN network (maxi-
mum 32 characters).
The WLAN (wireless) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code to connect the device directly to the
infotainment system’s Wi-Fi network without
having to enter the password: select Settings >
Network > Quick connection to infotainment
system.
276
Data transmissions
Congure Internet access
The infotainment system can use the WLAN
hotspot of an external device to establish an
Internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and share a wireless hotspot with
Internet on the external device. Refer to the
manufacturer’s instruction manual.
●
Press the HOME > button.
●
Tap the menu Settings > Network > Wi-Fi >
Wi-Fi and tick the verication box.
●
Press the Search for Wi-Fi button and select
the device you want from the list.
The system preferentially searches for devices
in the 5GHz Wi-Fi band. If no results are found,
it is advisable to check the device’s access
point settings.
●
If necessary, enter the network key of the
device in the infotainment system and conrm
with OK.
Manual settings:
●
To manually enter the network settings of an
external (WLAN) device.
The WLAN (wireless) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Note
Due to the large number of devices on the
market, it is not possible to guarantee fault-
free operation of all functions.
Full Link
Introduction
With Full Link it is possible to view and use
the contents and functions that are shown on
the mobile phone device on the infotainment
screen.
To do this, the mobile phone device must
be connected with the infotainment system
through a USB interface.
Some technologies can also be used by Wire-
less Full Link through the Bluetooth® interface
and a Wi-Fi connection.
The following technologies may be available:
●
Apple CarPlay™
●
Apple CarPlay™ Wireless
●
Android Auto™
●
Android Auto™ Wireless
The availability of the technologies that Full
Link includes depends on the country and the
mobile phone device used.
You can nd more information on the CUPRA
website (ao).
Access the Full Link main menu
Browsing the Full Link main menu depends on
the infotainment system used.
●
Press MENU > Full Link.
Congure Wireless Full Link
In order to use Wireless Full Link, you must rst
pair the mobile phone device with the infotain-
ment system. To do this, proceed as follows:
Connect a mobile phone device for the rst
time.
●
Unlock the mobile phone device.
●
Enable Wi-Fi reception and Bluetooth® on
the mobile phone device.
●
Connect the mobile device to the infotain-
ment system using a USB cable.
●
Access the Full Link main menu, if it is not
displayed automatically.
●
Select the mobile device and the technology
you want.
●
Conrm authorisation inquiries on the mo-
bile phone device to grant the necessary au-
thorisations to the infotainment system.
●
Disconnect the USB connection and
connect with the infotainment system again via
Wi-Fi or Bluetooth®. Wireless Full Link is now
congured.
The pairing has concluded. The connected
mobile phone device can also use Wireless Full
Link from now on without the USB connection.
Data transmissions
277
Full Link
If pop-up menus are rejected during the con-
nection process, Wireless Full Link will not be
available. In this case, CUPRA recommends re-
moving the devices in both the telephone set-
tings and the infotainment system, and restart-
ing the connection process.
Bluetooth pairing®
You can connect your device to the infotain-
ment system via Bluetooth®.
If the device is compatible, the system will in-
form you that you can connect your device to
Apple CarPlay™ or Android Auto™ as appropri-
ate.
WARNING
The use of applications while driving can dis-
tract your attention from the traic. Any dis-
traction aecting the driver in any way can
lead to an accident and cause injuries.
●
Always drive with attention to traic and in
a responsible manner.
WARNING
Any applications that are not suitable or ex-
ecute incorrectly may cause damage to the
vehicle, accidents and serious injuries.
●
Protect the mobile phone device and its
applications from inappropriate use.
●
Never make modications to the applica-
tions.
●
Follow instructions in the instruction man-
ual for the mobile phone device.
NOTICE
CUPRA cannot be held liable for any dam-
age caused to the vehicle as a result of the
use of applications that are of poor quality
or are defective, inadequate programming of
the applications, insuicient coverage of the
network, loss of data during transmission or
improper use of mobile phone devices.
Note
●
Wireless Full Link may not be compatible
with all technologies.
●
When crossing the border into countries
with permitted radio frequencies dierent
to those in your own country, running the
Full Link Wireless function may be restricted
or even unavailable due to legal regulations.
This may also be indicated by a message in
the infotainment system. Running Full Link
via cable is not aected by this restriction
and it can continue to be used.
Applications (apps)
With Full Link, the display of the contents of
CUPRA applications and other providers instal-
led on mobile phone devices can be transfer-
red to the infotainment screen.
In the case of third-party applications, there
may be compatibility problems.
Applications, their use and the necessary mo-
bile phone connection may be pay per use.
The applications on oer can be varied and
designed for a vehicle or a specic country.
The content and volume of applications, as
well as the companies that oer them, may
vary. Some applications also depend on the
availability of third-party services.
It cannot be guaranteed that all the applica-
tions oered will work on all mobile phone de-
vices or with all their operating systems.
The applications oered by CUPRA can be
modied, cancelled, deactivated, reactivated
and extended without prior notication.
To avoid distracting the driver while driving,
only certied applications can be used.
Full Link symbols and settings
To show more information.
For additional information (Wireless con-
nection).
278
Data transmissions
For additional information (Wireless con-
nection).
Apple CarPlay™
In order to use Apple CarPlay™, the following
requirements must be met:
●
The iPhone™ must be compatible with Ap-
ple CarPlay™.
●
Voice control (Siri ™) must be active on the
iPhone™.
●
Apple CarPlay™ must be active without limi-
tations in the iPhone™ settings.
●
If this is not possible via Apple CarPlay™
Wireless, the iPhone™ must be connected to
the infotainment system via a USB connection.
Only USB connections with data transmission
are suitable for the use of Apple CarPlay™.
●
The USB cable used must be an original Ap-
ple™ cable.
Apple CarPlay™ Wireless: Bluetooth® and Wi-
Fi must also be activated on the iPhone™.
Establish connection
When you rst connect an iPhone™, follow the
instructions on the infotainment system display
and on the iPhone ™.
The requirements must be met to use Apple
CarPlay™.
Launch Apple CarPlay™:
●
Press MENU > Full Link to access the Full
Link main menu
●
Press Apple CarPlay™ to establish a connec-
tion with the iPhone™.
Disconnecting
●
In Apple CarPlay™ mode, press the
CUPRA icon to access the Full Link main
menu.
●
Press to interrupt the active connection.
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
●
If there is an active Bluetooth® connection, it
is automatically interrupted.
●
It is not possible to use the built-in navigation
system and the Apple CarPlay™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Depending on the infotainment system you
use, on the instrument cluster display you can
view data from the Telephone mode.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briey to start voice control using the infotain-
ment system.
●
Press and hold this button to start voice con-
trol (Siri™) of the connected iPhone™.
Note
●
The availability of technologies depends on
the country and may vary.
●
You will nd information about technical
requirements, compatible iPhones, certied
applications and their availability on the
CUPRA and Apple CarPlay™ websites, at spe-
cialised CUPRA dealerships or at any SEAT
dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
●
The mobile phone device, called smart-
phone from here on, must be compatible with
Android Auto™.
●
The smartphone must have an Android
Auto™ application installed.
Data transmissions
279
Wired and wireless connections
●
If this is not possible via Android Auto™ Wire-
less, the smartphone must be connected to
the infotainment system via a USB connection
with data transmission.
●
The USB cable used must be an original ca-
ble provided by the smartphone manufacturer.
Android Auto™ Wireless: The smartphone’s
Bluetooth® and Wi-Fi signal also have to be on.
Establish connection
When you rst connect a smartphone, follow
the instructions on the infotainment system
display and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
●
Press MENU > Full Link to access the Full
Link main menu
●
Press Android Auto™ to establish a connec-
tion with the smartphone.
Disconnecting
●
In Android Auto™ mode, press the CUPRA
icon to access the Full Link main menu.
●
Press to interrupt the active connection.
Special characteristics
During an active Android Auto™ connection,
the following characteristics are applicable:
●
An active Android Auto™ device can be con-
nected at the same time via Bluetooth® (HFP
prole) with the infotainment system.
●
It is possible to use the phone’s functions
through Android Auto™. If the Android Auto™
device is connected at the same time via Blue-
tooth® with the infotainment system, the tele-
phone function of the infotainment can also
be used.
●
It is not possible to use the built-in navigation
system and the Android Auto™ navigation sys-
tem at the same time. The last route started
interrupts the one that was previously active.
●
Telephone and Media data can be displayed
on the instrument cluster display.
●
Only navigation instructions from compatible
apps are displayed on the instrument cluster's
screen.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
●
Press on the multifunction steering wheel
briey to start voice control using the infotain-
ment system.
●
Press and hold this button to start voice
control (Google Assistant) on the connected
smartphone.
Note
●
The availability of technologies depends on
the country and may vary.
●
You will nd information about technical
requirements, compatible mobile phone de-
vices, certied applications and their availa-
bility on the CUPRA and Android Auto™ web-
sites, at specialised CUPRA dealerships or at
any SEAT dealership.
Wired and wireless con-
nections
USB connection
Fig.174 Centre console: USB input.
280
Data transmissions
Fig.175 Rear centre console: USB
connectors with power socket function.
The USB port can be found in the storage
compartment area of the front centre console
›››
Fig.174.
Depending on the equipment and the country,
the vehicle may also have USB connections
exclusively for charging or as a power socket.
These USB ports are located at the rear of the
console, between the front seats ›››Fig.175.
Note
Before switching the ignition on or o, un-
plug the appliances from the USB ports to
protect them from any damage caused by
uctuations in voltage.

Related Topics

Popular Owner Manuals