2024-2026 Cupra Terramar SUV Practical equipment -> Power sockets User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical equipment -> Power sockets for Your Cupra Terramar SUV First Generation (2024-2026)

Practical equipment
261
Power sockets
WARNING
If the drawer is left open, it could prevent
use of the pedals. This may cause serious ac-
cidents and injuries.
●
Always keep the drawer closed while the
vehicle is in motion. Otherwise, the drawer
and any objects in it could fall into the driv-
er's footwell and obstruct the pedals.
NOTICE
The drawer can contain 1.5kg at most.
Other object holders
You will nd more object holders, compart-
ments and supports in other parts of the vehi-
cle:
●
In the centre console.
●
In the upper part of the glove compartment.
The load should not exceed 1.2kg.
●
Other storage compartments are found in
the rear seat, to the left and the right of the
seats.
●
In the backrests of the front seats, storage
pockets.
There are hangers on the struts of the doors
and the rear.
WARNING
Hanging clothes may decrease the driver's
visibility, which may cause serious accidents
and injuries.
●
Always hang clothes from hangers in such
a way that the driver's visibility is not aec-
ted.
●
Only hang light pieces of clothing from the
hangers of the vehicle. Never leave heavy,
hard or sharp objects in the pockets of these
pieces of clothing.
●
Do not use clothes hangers to hang up
the clothing, as this could interfere with the
function of the head-protection airbags.
NOTICE
Do not place overly large objects in the pock-
ets on the front seat backrests (e.g. bottles)
or objects with sharp edges. Risk of damage
to the pockets and the upholstery.
Power sockets
Introduction
Electrical equipment can be plugged in to the
vehicle's sockets.
The devices must be in a perfect state of re-
pair. Do not use defective devices.
The 12 volt power socket will only work with the
ignition on.
WARNING
Improper use of the sockets or electrical de-
vices could lead to a re and cause serious
injuries.
●
Please ensure that children are never left
unsupervised inside the vehicle. The sockets
and the devices connected to them can be
used when the ignition is switched on.
●
If electrical devices overheat, switch them
o immediately and disconnect them from
the power supply.
NOTICE
●
To avoid damaging the electrical system,
never connect electrical devices that supply
power, such as solar panels or battery charg-
ers, to 12-volt sockets to charge the 12-volt
battery.
●
Only use electrical devices that comply
with the applicable electromagnetic com-
patibility directives.
●
To prevent voltage uctuations from caus-
ing damage, unplug any connected electrical
devices before switching the ignition on and
o.
●
Never connect electrical devices that con-
sume more than the specied power to a 12
volt socket. Exceeding the maximum power
consumption could damage the vehicle's
electrical system.
●
Observe the instruction manuals of electri-
cal devices!
262
Practical equipment
1
2
Note
●
The use of electrical appliances with the
engine switched o will cause the 12-volt
battery to discharge.
●
Uninsulated devices can interfere with the
radio, infotainment system and the vehicle’s
electronic system.
Vehicle power sockets
Fig.171 Vehicle 12-volt socket.
›››
Fig.171
12-volt sockets inside the front armrest.
12-volt USB sockets at the rear of the con-
sole, between the front seats.
Make sure that the maximum power of the
sockets is not exceeded. The power consump-
tion of the devices is shown on the type plate
of the devices.
The continuous output of all of the vehicle’s
12-volt sockets is 120 watts in total.
When connecting two or more electrical devi-
ces at the same time, make sure that their total
consumption never exceeds 190 watts.
USB power sockets
Depending on the equipment and the country,
the vehicle may also have USB connections
exclusively for charging or as a power socket
›››Fig.171
2
.
These USB ports are located at the rear of the
console, between the front seats. These con-
nectors can work at a maximum power of up to
10.5W per port.
NOTICE
If the 12-volt socket is used at full power for
longer than the specied time, the fuse may
blow.
●
Never use the 12-volt socket at full power
for more than 10 minutes.
●
In the case of full power, use a single 12-
volt socket.
230-volt power socket
Fig.172 In the luggage compartment:
230-volt power socket.
With the engine running, the power socket ac-
tivates automatically as soon as a connector is
plugged in.
Maximum power consumption is 150 watts
(300 watts - maximum 2 minutes).
Connect an electrical device: Open the cover
and insert the plug into the power socket as
far as possible to unlock the built-in child lock.
The socket only supplies power once the child
lock is unlocked.
LED on the power socket ›››
Fig.172 (arrow)
Steady green light:
●
The childproof lock is unlocked. The socket
is ready to operate.
Practical equipment
263
Power sockets
Flashing green light:
●
The ignition is switched o, but there is
enough power available to continue supplying
the socket with current for a maximum of 10
minutes. If the connector is unplugged before
this time elapses, the socket is disconnected
and cannot be used again until the ignition is
switched on again.
If insuicient power is available in the 12V bat-
tery, the socket cannot be used while the en-
gine is o.
Flashing red light:
●
There is an anomaly, e.g. disconnection due
to a current surge or overheating.
Disconnection due to overheating
When the temperature exceeds a certain
value, the 230-volt socket inverter is automat-
ically disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The 230-
volt power supply can be used once again after
a cooling time. First unplug the connector of
the connected device and then plug it back in
again. This prevents the electrical device from
being switched on again if this is not wanted.
WARNING
The electrical system is under high voltage!
●
Do not spill liquids onto the socket.
●
Do not plug adapters or extension cords
into the 230-volt power socket. Otherwise,
the integrated child lock will be unlocked and
the power socket will operate.
●
Do not insert conductive objects (a knitting
needle, for example) into the 230-volt power
socket.
NOTICE
230-volt power socket:
●
Do not leave devices or connectors that
are too heavy (e.g. a transformer) hanging
directly from the power socket.
●
Do not connect neon lamps.
●
Only connect devices to the socket if the
device and socket voltage match.
●
The built-in overload disconnect function
prevents any electrical devices that require a
high start-up current from turning on. In this
case, unplug the electrical device's power
supply and re-try the connection after about
10 seconds.
Note
Some appliances may not work properly
when connected to the 230-volt sockets due
to a lack of power (watts).

Related Topics

Popular Owner Manuals