Get Ease of use and comfort Guide for DS 3 Crossback 4 Door First Generation (2018-2022)

38

03

Ease of use and comfort

Height

Correct driving position

Front seats

For safety reasons, adjustments must

only be made when the vehicle is

stationary.

Before moving the seat backwards,

ensure that there is no person or object

that might prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed on

the floor behind the seat.

Before taking to the road and to make the most

of the ergonomic layout of the instruments and

controls, carry out these adjustments in the

following order:

►ꢀ Pull the control upwards to raise the seat or

push it downwards to lower it until the desired

position is obtained.

– head restraint height.

Manual adjustments

– seat backrest angle.

– seat cushion height.

Electric adjustments

Longitudinal

– longitudinal seat position.

– steering wheel height and reach.

– rear view mirror and door mirrors.

Longitudinal

►ꢀ Raise the control bar and slide the seat

forwards or backwards.

►ꢀ Push the control forwards or rearwards to

slide the seat.

Backrest angle

Once these adjustments have been made,

check that the instrument panel can be

viewed correctly from your driving position.

►ꢀ Turn the knob to adjust the backrest.

►ꢀ Tilt the control forwards or rearwards.

39

03

Ease of use and comfort

Cushion height and angle

The adjustment is correct when the upper

edge of the head restraint is level with the

Additional adjustments

top of the head.

Electric lumbar adjustment

Removing a head restraint

►ꢀ Tilt the backrest to the rear to make it easier

to remove the head restraint.

►ꢀ Pull the head restraint fully up.

►ꢀ Press the lug A to release the head restraint

and remove it completely.

►ꢀ Tilt the rear of the control upwards or

downwards to obtain the required height and

angle.

►ꢀ Stow the head restraint securely.

Front head restraints

Refitting a head restraint

Height adjustment

►ꢀ Insert the head restraint rods into the guides

in the corresponding seat backrest.

►ꢀ Push the head restraint down as far as it will

go.

►ꢀ Press the + or - control to obtain the desired

lumbar support.

Massage function

(Driver’s seat only)

►ꢀ Press the lug A to release the head restraint

and push it down.

►ꢀ Adjust the height of the head restraint.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

►ꢀ Upward: pull the head restraint up to the

desired position; the head restraint can be felt to

click into position.

►ꢀ Downward: press lug A to lower the head

restraint.

This function provides lumbar massage; it only

operates when the engine is running as well as in

STOP mode of the Stop & Start system.

40

03

Ease of use and comfort

Activation/Deactivation

The system status is memorised when the ignition

is switched off.

Steering wheel

adjustment

►ꢀ Press this button to activate/

deactivate the function.

Upon activation, the indicator lamp comes on.

The massage function is activated for a period of

one hour.

Do not use the function when the seat is

not occupied.

Reduce the heating intensity as soon as

possible.

During this time, massage is performed in 6 cycles

of 10 minutes (6 minutes of massage followed by

a 4-minute break).

After one hour, the function is deactivated; the

indicator lamp goes off.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function off; reducing electricity

consumption in turn decreases fuel

consumption.

Heated seats

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

►ꢀ When stationary, pull the control to release

the steering wheel.

►ꢀ Adjust the height and reach to suit your driving

position.

There is a risk of burns for people whose

perception of heat is impaired (illness, taking

medication, etc.).

►ꢀ Push the control lever to lock the steering

wheel.

To keep the heated pad intact and to prevent a

short circuit:

– Do not place heavy or sharp objects on the

seat.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat

is damp.

As a safety measure, these adjustments

must only be carried out with the vehicle

stationary.

The function is active only with the engine

running.

On/Off

►ꢀ Press the button corresponding to your seat.

►ꢀ Each press changes the heating level; the

corresponding number of indicator lamps come

on.

►ꢀ To stop heating, press the button again until

all the indicator lamps are off.

41

03

Ease of use and comfort

►ꢀ Turn the mirror towards the vehicle.

For more information on Rear screen demisting/

defrosting, refer to the corresponding section.

Mirrors

Electric folding

Door mirrors

Rear view mirror

If the vehicle is so equipped, the mirrors can

be folded electrically from the inside, with the

vehicle parked and the ignition on:

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlights of other vehicles, etc.

Adjustment

Manual model

Day/night position

►ꢀ Move the control A down.

Electric unfolding

►ꢀ From outside: unlock the vehicle using the

remote control or the Keyless Entry and Starting.

►ꢀ From inside: with the ignition on, move control

A upwards.

►ꢀ Turn control A to the right or to the left to

select the corresponding mirror.

►ꢀ Move the control in any of the four directions

to adjust.

►ꢀ Pull the lever to change to the anti-dazzle

"night” position.

►ꢀ Push the lever to change to the normal "day"

position.

Adjustment

►ꢀ Return the control to the central position.

The automatic folding and unfolding of

the door mirrors with the remote control

can be set in the touch screen’s

Driving/Vehicle menu.

As a safety measure, the mirrors should

be adjusted to reduce the blind spots.

The objects observed are, in reality, closer than

they appear. Take this into account in order

to correctly judge the distance of vehicles

approaching from behind.

►ꢀ Set the mirror to the normal “day” position.

Demisting/Defrosting

If the vehicle is so equipped, demisting/

defrosting of the heated door mirrors is

performed when the heated rear screen is

switched on.

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

42

03

Ease of use and comfort

Automatic "electrochrome" model

– A high position, for when the seat is in use:

►ꢀ Pull the head restraint fully up.

– A low position, for stowing, when the seat is

not in use:

Never drive with passengers seated at the

rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

►ꢀ Press the lug A to release the head restraint

and push it down.

The rear head restraints can be removed.

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

Removing a head restraint

This system automatically and progressively

transitions between day and night modes, using a

sensor that measures the light entering from the

rear of the vehicle.

Folding the backrests

Manoeuvring the seat backrests should

only be done when the vehicle is

stationary.

To ensure optimum visibility during your

manoeuvres, the mirror lightens

automatically when reverse gear is engaged.

First steps:

►ꢀ Lower the head restraints.

►ꢀ If necessary, move the front seats forward.

►ꢀ Check that no person or object will interfere

with folding down the backrests (clothing,

luggage, etc.).

►ꢀ Check that the seat belts are free, not

engaged in the buckles. Release them so that the

backrest can be moved.

Rear bench seat

Bench seat with fixed cushions and split folding

backrests (2/3-1/3) to adapt the boot load space.

►ꢀ Release the backrest using control 1.

►ꢀ Tilt the backrest slightly forwards.

►ꢀ Pull the head restraint fully up.

►ꢀ Press the lug A to release the head restraint

and remove it completely.

Rear head restraints

Refitting a head restraint

►ꢀ Insert the head restraint rods into the guides

in the corresponding seat backrest.

►ꢀ Push the head restraint down as far as it will

go.

►ꢀ Press the lug A to release the head restraint

and push it down.

They have two positions:

43

03

Ease of use and comfort

Controls

Depending on version, the controls are accessible

in the "Air conditioning" touch screen menu or

are grouped together in the control panel on the

centre console.

Air distribution

►ꢀ Put the backrest 2 in the upright position and

push it firmly to latch it home.

►ꢀ Check that the red indicator is no longer

visible in the release grip 1.

►ꢀ Press the backrest release grip 1.

►ꢀ Guide backrest 2 down to the horizontal

position.

►ꢀ Ensure that the outer seat belts were not

trapped during the operation.

When the backrest is released, the red

indicator is visible in the release grip.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking or

an accident.

The contents of the boot may be thrown

forward - risk of serious injury!

Repositioning the backrests

1. Windscreen demisting/defrosting vents

2. Front side window demisting/defrosting vents

3. Adjustable and closable side air vents

4. Adjustable and closable central air vents

5. Air outlets to the front footwells

First check that the outer seat belts are

lying vertically flat alongside the backrest

latching rings.

6. Air outlets to the rear footwells

Heating and Ventilation

Air intake

Advice

The air circulating in the passenger compartment

is filtered and originates either from the

exterior, via the grille located at the base of the

windscreen, or from the inside in air recirculation

mode.

Using the ventilation and air conditioning

system

►ꢀ To ensure that air is distributed evenly,

keep the external air intake grilles at the base

of the windscreen, the nozzles, the vents, the

44

03

Ease of use and comfort

air outlets and the air extractor in the boot free

from obstructions.

water underneath the vehicle. This is perfectly

normal.

Manual air conditioning

Press the Climate button to display the

►ꢀ Do not cover the sunshine sensor located

on the dashboard; this sensor is used to

regulate the automatic air conditioning

system.

►ꢀ Operate the air conditioning system for at

least 5 to 10 minutes once or twice a month to

keep it in perfect working order.

►ꢀ If the system does not produce cold air,

switch it off and contact a dealer or a qualified

workshop.

When towing the maximum load on a steep

gradient in high temperatures, switching off

the air conditioning increases the available

engine power, enhancing the towing capacity.

system controls page.

Servicing the ventilation and air

conditioning system

►ꢀ Ensure that the passenger compartment

filter is in good condition and have the filter

elements replaced regularly.

We recommend using a composite passenger

compartment filter. Thanks to its special

active additive, this type of filter helps to

purify the air breathed by the occupants

and keep the passenger compartment clean

(by reducing allergic symptoms, unpleasant

odours and greasy deposits).

►ꢀ To ensure correct operation of the

air conditioning system, have it checked

according to the recommendations in the

Maintenance and Warranty Guide.

1. Temperature adjustment

2. Air flow adjustment

3. Air distribution adjustment

4. Air conditioning on/off

Avoid driving for too long with the

ventilation off or with prolonged operation

of interior air recirculation. Risk of misting and

deterioration of the air quality!

Temperature adjustment

►ꢀ Press one of the buttons 1 (- or +) to adjust the

temperature to your liking.

Stop & Start

The heating and air conditioning systems

only operate when the engine is running.

Temporarily deactivate the Stop & Start

system to maintain a comfortable temperature

in the passenger compartment.

Air flow adjustment

If the interior temperature is very high

after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air flow control at a setting high

enough to quickly change the air in the

passenger compartment.

►ꢀ Press one of the buttons 2 (- or +) or turn the

knob 2 to decrease or increase the speed of the

fan.

For more information on the Stop & Start, refer

to the corresponding section.

When the air flow is reduced to a minimum,

ventilation stops.

Air distribution adjustment

►ꢀ Press button 3 to adjust the air flow

Condensation created by the air

conditioning results in a discharge of

distribution inside the passenger compartment.

45

03

Ease of use and comfort

Central and side air vents, footwells

Central and side air vents

Windscreen

System switch-off

►ꢀ Press this button.

Its indicator lamp comes on and all other indicator

lamps for the system go off.

This action deactivates all functions of the air

conditioning system.

Temperature is no longer regulated. A slight flow

of air can still be felt, resulting from the forward

movement of the vehicle.

Windscreen, footwells

Footwells

1. Temperature adjustment

2. Air flow adjustment

3. Air distribution adjustment

4. Air conditioning on/off

5. Automatic comfort programme on/off

6. Maximum A/C

Air conditioning on / off

Automatic air conditioning

The air conditioning operates with the engine

running, but the ventilation and its controls can

be accessed with the ignition on.

The air conditioning system is designed to

operate effectively in all seasons, with the

windows closed.

It is used to:

7. Access to the secondary page

8. Adjustment of the automatic comfort

programme (Soft/Normal/Fast)

– lower the temperature in summer,

– increase the effectiveness of the demisting in

winter, above 3°C.

►ꢀ Press button 4 to activate/deactivate the air

conditioning system.

Operation of the air conditioning and regulation

of temperature, air flow and air distribution in the

passenger compartment are automatic.

Press the Climate menu button to access

the system controls.

Temperature adjustment

►ꢀ Press one of the buttons 1 to increase (red) or

decrease (blue) the value.

Air conditioning does not operate when

the air flow is disabled.

To obtain cool air more quickly, enable interior

air recirculation for a brief period. Then return

to the intake of exterior air.

The value displayed corresponds to a level of

comfort and not to a precise temperature.

Air flow adjustment

►ꢀ Press one of the buttons 2 (- or +) to increase

or decrease air flow.

Switching off the air conditioning may result in

some discomfort (humidity or misting).

The air flow symbol (a fan) is filled in according to

the request.

46

03

Ease of use and comfort

When the air flow is reduced to a minimum,

ventilation stops.

Air conditioning does not operate when

the air flow is disabled.

To obtain cool air more quickly, enable interior

air recirculation for a brief period. Then return

to the intake of exterior air.

This profile setting is associated with automatic

mode only. However, on deactivation of the AUTO

mode, the indicator lamp for the most recently

selected profile remains on.

Changing the profile setting does not reactivate

AUTO mode if it was deactivated.

"OFF" is displayed alongside the fan.

Air distribution adjustment

►ꢀ Press the buttons 3 to adjust the air flow

distribution inside the passenger compartment.

Windscreen and side windows

Switching off the air conditioning may result in

some discomfort (humidity or misting).

In cold weather with the engine cold, the

air flow is increased gradually until the

comfort setting has been reached, in order to

limit the delivery of cold air into the passenger

compartment.

On entering the vehicle, if the interior

temperature is much colder or warmer than

the comfort setting requested, there is no need

to alter the value displayed to more quickly

reach the required level of comfort. The system

automatically corrects the temperature

difference as quickly as possible.

Automatic Comfort programme

Central and side air vents

Footwells

This automatic mode ensures optimum

management of the passenger compartment

temperature, air flow and air distribution, based

on the selected comfort level.

The lighting of the button indicates that air is

being blown in the specified direction.

It is possible to activate all three buttons

simultaneously, for uniform distribution

throughout the passenger compartment.

►ꢀ Press button 5 to activate or deactivate the air

conditioning system’s automatic mode .

The indicator lamp in the button lights up

when the air conditioning system is operating

automatically.

You can adjust the intensity of the

Air conditioning on / off

automatic Comfort programme by using the

"OPTIONS" button to select a profile:

– "Soft": provides soft and quiet operation by

limiting air flow.

– "Normal": offers the best compromise between

a comfortable temperature and quiet operation

(default setting).

Maximum air conditioning

The air conditioning system is designed to

operate effectively in all seasons, with the

windows closed.

This function automatically adjusts the

temperature setting to the lowest possible, the

air distribution towards the central and side air

vents, the air flow to maximum and activates

interior air recirculation.

It is used to:

– lower the temperature in summer,

– increase the effectiveness of the demisting in

winter, above 3°C.

►ꢀ Press button 6 to activate / deactivate the

function (the indicator lamp will come on/switch

off).

Once the function is deactivated, the system

returns to the previous settings.

– "Fast": provides strong and effective air flow.

To change the current profile (shown by the

corresponding indicator lamp), press button 8

repeatedly until the desired profile is displayed:

The "Normal" or "Fast" profiles are the most

comfortable for passengers in the rear seats.

►ꢀ Press button 4 to activate/deactivate the air

conditioning system.

47

03

Ease of use and comfort

the windscreen and side windows (confirmed by

the illumination/extinction of the indicator lamp).

The system automatically manages the air

conditioning, air flow and air intake, and provides

optimum distribution towards the windscreen and

side windows.

Switching the system off

►ꢀ Press this button.

Its indicator lamp comes on and all other indicator

lamps for the system go off.

This action deactivates all functions of the air

conditioning system.

This function heats the windscreen and washer

jets under cold conditions.

The temperature is no longer regulated. A slight

flow of air can still be felt, due to the forward

movement of the vehicle.

Rear screen demist

- defrost

Without changing the settings for the air

conditioning system, it allows faster release

of the windscreen wiper blades when they

are frozen to the windscreen and helps avoid

the accumulation of snow resulting from the

operation of the windscreen wipers.

Demisting/defrosting only operates with the

engine running.

Interior air recirculation

Depending on version, this also applies to the door

mirrors.

The intake of exterior air prevents the formation

of mist on the windscreen and side windows.

Recirculating the interior air isolates the

passenger compartment from outside odours

and fumes and allows the desired passenger

compartment temperature to be achieved more

rapidly.

►ꢀ Press this button to activate/

deactivate the function (confirmed by the

illumination/extinction of the indicator lamp).

Demisting/defrosting switches off automatically

to prevent an excessive consumption of electrical

current.

On/Off

►ꢀ Press this button to activate/

deactivate the function (confirmed by the

illumination/extinction of the indicator lamp).

Switch off demisting/defrosting as soon

as you no longer consider it necessary,

as reducing the consumption of electrical

current reduces fuel consumption.

The function is activated automatically

when reverse gear is engaged.

►ꢀ With the engine running, press this button to

activate/deactivate the function (confirmed by

the illumination/extinction of the indicator lamp).

The function is active as soon as the outside

temperature drops below 0°C. It is deactivated

automatically each time the engine is switched

off.

Heated windscreen and

washer jets

Front demist - defrost

►ꢀ Press this button to activate/

Depending on country of sale.

deactivate the demisting or defrosting of

48

03

Ease of use and comfort

For more information on Remotely operable

features, refer to the corresponding section.

Remote-controlled heating

and air conditioning

(Electric)

This function allows you to programme the

vehicle to adjust the passenger compartment

temperature to a pre-defined, non-modifiable

temperature (approx. 21°C) before you enter the

vehicle, on the days and times of your choice.

Interior fittings

Operating conditions

– The function is only activated when the ignition

is off and the vehicle locked.

– The function is not activated if the battery

charge level is below 50%.

– If recurrent programming is activated (e.g.

from Monday to Friday) and two pre-conditioning

sequences are performed without the vehicle

being used, the programming will be deactivated.

Programming

(With DS CONNECT NAV)

In the Climate > OPTIONS menu:

Select Temperature conditioning.

►ꢀ Press + to programme.

►ꢀ Select the time of entry into the vehicle and

the desired days. Press OK.

►ꢀ Press ON to activate this programming.

Pre-conditioning begins approximately 45 minutes

before the programmed time, and is maintained

for 10 minutes afterwards.

You can define multiple programmings.

Each one is saved in the system.

1. Grab handle

2. Sun visor

To optimise battery life, we recommend

programming with the vehicle plugged in.

3. Glove box

4. Door pockets

5. Storage compartment or Wireless smartphone

charger

6. Cup holder

This feature can be programmed using a

smartphone, via the MyDS application.

With DS CONNECT RADIO, the programming can

only be carried out using a smartphone, via the

application.

49

03

Ease of use and comfort

Never drive with the glove box open when

a passenger is at the front. It may cause

injury during sharp deceleration!

CarPlay^®, so that certain smartphone applications

can be used on the touch screen.

To achieve the best results, it is necessary to

use a cable made or approved by the device

manufacturer.

These applications can be managed using the

steering mounted controls or those of the audio

system.

7. Central armrest with USB port and 12 V

accessory socket (depending on version)

8. Storage compartment below the steering

wheel

Central armrest

Sun visor

►ꢀ With the ignition on, raise the concealing flap;

the mirror is illuminated automatically.

This sun visor is also equipped with a ticket

holder.

When the USB port is used, the portable

device charges automatically.

A message is displayed if the power drawn

by the portable device exceeds the current

supplied by the vehicle.

For more information on how to use this

equipment, refer to the Audio and telematics

section .

Glove box

►ꢀ To open the glove box, raise the handle.

It includes a storage space.

USB socket

12 V accessory socket

You can connect a portable device or a USB

memory stick.

Depending on version, the

USB port located on the

centre console also allows a smartphone to be

connected by MirrorLink^TM, Android Auto^®or

►ꢀ To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a suitable

adaptor.

Observe the maximum power rating to

avoid damaging your accessory.

50

03

Ease of use and comfort

The connection of an unapproved

– TNF tweeters: inverted dome aluminium

technology giving optimum sound dispersion and

very detailed higher frequencies.

– 12-way active amplification - 515 Watts: Hybrid

Class AB / Class D technology providing breadth

and finesse in the high frequency signals, as well

as real power in the bass.

– Subwoofer: 200 mm triple coil Power Flower^TM

technology for defined and dynamic reproduction

of lower frequencies.

The charger works with the engine running and

with the Stop & Start system in STOP mode.

Charging is managed by the smartphone.

With the Keyless Entry and Starting system, the

charger’s operation may be briefly disrupted when

a door is opened or the ignition is switched off.

electrical device, such as a USB charger,

may adversely affect the operation of vehicle

electrical systems, causing faults such as poor

radio reception or interference with displays in

the screens.

Charging

FOCAL ELECTRA^®Premium Hi-Fi

system

►ꢀ With the charging area clear, place a device in

its centre.

Subwoofer under boot mat: vacuum the

grille regularly and be careful not to have

any liquids nearby.

When the portable device is detected, the

charger’s indicator lamp lights up green. It

remains lit for the whole time that the battery is

being charged.

Wireless smartphone charger

The system is not designed to charge

multiple devices simultaneously.

Your vehicle is equipped with a high-fidelity

acoustic system designed by the French brand

FOCAL^®, a specialist in acoustics for more than

35 years and recognised throughout the world

for its patented innovations and its unique audio

signature.

12 speakers incorporating exclusive FOCAL^®

technologies offer the pleasure of pure and

detailed sound inside the vehicle:

– Central speaker / satellite speakers: Polyglass

technology delivering sound immersion and

spatialisation.

– High fidelity woofer / mid-range speakers:

Polyglass technology delivering balance and

precise sound.

Do not leave any metal objects (coins,

keys, vehicle remote control, etc.) in the

charging area while a device is being charged,

due to the risk of overheating or interrupting

the charging process.

It allows wireless charging of a portable device

such as a smartphone, using the magnetic

induction principle, in accordance with the Qi 1.1

standard.

The portable device to be charged must be

compatible with the Qi standard, either by design

or by using a compatible holder or shell.

The charging area is identified by the Qi symbol.

Operating check

The state of the indicator lamp allows the

operation of the charger to be monitored.

51

03

Ease of use and comfort

The approved mats have two fasteners located

underneath the seat.

Mats

State of the

Meaning

indicator lamp

Fitting

Off

Engine switched off.

No compatible devices

detected.

Courtesy lamps

Charging finished.

Fixed green

Compatible device

detected.

Charging.

Flashing orange

Foreign object detected in

the charging zone.

When fitting the mat for the first time, on the

driver's side use only the fasteners supplied in the

enclosed sachet.

Device not well centred in

the charging zone.

1.Front courtesy lamp

2.Front map reading lamps

Fixed orange

Fault with the device's

battery meter.

Device battery

temperature too high.

Charger malfunction.

The other mats are simply laid over the carpet.

Removing/refitting

Front courtesy lamps

►ꢀ To remove it on the driver's side, move the seat

backwards and unclip the fasteners.

►ꢀ To refit it, position the mat and secure it by

pressing.

In this position, the courtesy lamp comes

on gradually:

– on unlocking the vehicle,

– on removing the key from the ignition,

– on opening a door,

– on activating the remote control locking button,

in order to locate your vehicle.

It switches off gradually:

– when the vehicle is locked,

– when the ignition is switched on,

– 30 seconds after the last door is closed.

Permanently off.

►ꢀ Check that the mat is secured correctly.

If the indicator lamp is lit orange:

– remove the device, then place it back in the

centre of the charging zone.

To avoid any risk of jamming the pedals:

– Only use mats which are suitable for

the fasteners already present in the vehicle;

these fasteners must be used.

– Never fit one mat on top of another.

The use of mats not approved by the

Manufacturer may interfere with access to the

pedals and hinder the operation of the cruise

control/speed limiter.

or

– remove the device and try again in a quarter of

an hour.

If the problem persists, have the system checked

by a dealer or a qualified workshop.

52

03

Ease of use and comfort

Permanent lighting.

Touch-sensitive reading lamps

►ꢀ With the ignition on, press the corresponding

reading lamp.

In "permanent lighting" mode, the lighting time

varies according to the circumstances:

– when the ignition is off, approximately ten

minutes,

– in energy economy mode, approximately thirty

seconds,

Boot fittings

– with the engine running, unlimited.

3. Rear touch-sensitive reading lamps

Map reading lamps

Front touch-sensitive courtesy

lamp

►ꢀ With the ignition on, operate the

corresponding switch.

Take care not to place anything in contact

with the courtesy lamps.

It comes on gradually:

– when the vehicle is unlocked.

– when the ignition is switched off.

– when a door is opened.

– when the remote control locking button is

activated, in order to locate the vehicle.

It switches off:

1. Load space cover

2. Boot lamp

3. Stowing rings

Touch-sensitive courtesy

lamps

– when the vehicle is locked.

4. Boot mat

– when the ignition is switched on.

– 30 seconds after the last door is closed.

The front and rear touch-sensitive reading lamps

come on and go off at the same time as the

courtesy lamp.

A long press on the courtesy lamp completely

deactivates it from coming on (confirmed by the

"OFF" symbol).

5. Tool kit (depending on equipment)

6. Storage well

The stowing rings are designed to secure

luggage using different types of retaining

nets. They are used with the ISOFIX mounting

rings located behind the rear seats.

The retaining nets are available as an option or

as an accessory.

1. Front touch-sensitive courtesy lamp

2. Front touch-sensitive reading lamps

For more information, contact a dealer.

53

03

Ease of use and comfort

Depending on version, it includes:

– A spare wheel alone or with the tool kit.

– The traction battery charging cable (Electric).

Load space cover

High load retaining net

This removable net allows the entire load volume

behind the front seats to be used up to the

roof when the rear seats are folded. It offers

protection to the occupants when very sharp

braking occurs.

►ꢀ Fold down the rear seats.

To remove the load space cover:

►ꢀ unhook the two cords,

►ꢀ gently lift the shelf, then remove it.

►ꢀ Attach the net’s straps to the lower anchoring

points, located on the fixings of the rear bench

seat backrest.

►ꢀ Pull on the straps to stretch the net.

When sharp deceleration occurs, objects

placed on the load space cover can turn

into projectiles.

Boot lamp

It comes on automatically when the boot is

opened and goes off automatically when the boot

is closed.

The lighting time varies according to the

circumstances:

– when the ignition is off, approximately 10

minutes.

Storage well

►ꢀ Insert the ends of the bar, one after the other,

into fixing points 1 of the roof.

– in energy economy mode, approximately 30

seconds.

– with the engine running, unlimited.

►ꢀ Fully raise the boot carpet to access the

storage well.

Ease of use and comfort for Your DS 3 Crossback 4 Door First Generation (2018-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals