42
03
Ease of use and comfort
Automatic "electrochrome" model
– A high position, for when the seat is in use:
►ꢀ Pull the head restraint fully up.
– A low position, for stowing, when the seat is
not in use:
Never drive with passengers seated at the
rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
►ꢀ Press the lug A to release the head restraint
and push it down.
The rear head restraints can be removed.
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
Removing a head restraint
This system automatically and progressively
transitions between day and night modes, using a
sensor that measures the light entering from the
rear of the vehicle.
Folding the backrests
Manoeuvring the seat backrests should
only be done when the vehicle is
stationary.
To ensure optimum visibility during your
manoeuvres, the mirror lightens
automatically when reverse gear is engaged.
First steps:
►ꢀ Lower the head restraints.
►ꢀ If necessary, move the front seats forward.
►ꢀ Check that no person or object will interfere
with folding down the backrests (clothing,
luggage, etc.).
►ꢀ Check that the seat belts are free, not
engaged in the buckles. Release them so that the
backrest can be moved.
Rear bench seat
Bench seat with fixed cushions and split folding
backrests (2/3-1/3) to adapt the boot load space.
►ꢀ Release the backrest using control 1.
►ꢀ Tilt the backrest slightly forwards.
►ꢀ Pull the head restraint fully up.
►ꢀ Press the lug A to release the head restraint
and remove it completely.
Rear head restraints
Refitting a head restraint
►ꢀ Insert the head restraint rods into the guides
in the corresponding seat backrest.
►ꢀ Push the head restraint down as far as it will
go.
►ꢀ Press the lug A to release the head restraint
and push it down.
They have two positions:
English 
