Get Instruments -> Indicators / Service indicator Guide for DS 3 Crossback 4 Door First Generation (2018-2022)

Instruments

Active Lane Keeping Assist

Fixed.

The function has been activated.

All the conditions have been met: the system is

operating.

Have your vehicle serviced very soon.

Indicators

Service spanner flashing

Flashing then fixed, when the

ignition is switched on.

(With BlueHDi Diesel engines, combined with the

Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Service indicator

The servicing information is expressed in terms of

distance (kilometres or miles) and time (months

or days).

The alert is given at whichever of these two terms

is reached first.

The servicing information is displayed in the

instrument panel. Depending on the version of the

vehicle:

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

Automatic wiping

Fixed.

Automatic windscreen wiping is activated.

Direction indicators

Resetting the service indicator

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

►ꢀ Switch off the ignition.

Direction indicators with audible signal.

The direction indicators are on.

Sidelamps

Fixed.

The lamps are on.

Dipped beam headlamps

Fixed.

The lamps are on.

DS MATRIX LED VISION

Fixed.

The value indicated is calculated

according to the distance covered and the

time elapsed since the last service.

The alert may also be triggered close to a due

date.

►ꢀ Press and hold the button located on the end

of the lighting control stalk.

The function is activated.

Automatic headlamp dipping

Fixed.

The function has been activated via

the touch screen (Driving / Vehicle menu).

The lighting control stalk is in the "AUTO" position.

►ꢀ With no action on the brake pedal, press the

START/STOP button once; a temporary display

window appears and a countdown begins.

►ꢀ When the display indicates =0, release the

lighting control stalk button; the spanner symbol

disappears.

Service spanner

On temporarily when the ignition is

switched on.

Blue warning/indicator lamps

Between 620 and 1,860 miles (1,000 and 3,000

km) remain before the next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than 620

miles (1,000 km).

Main beam headlamps

Fixed.

If you disconnect the battery following

this operation, lock the vehicle and wait

at least 5 minutes for the reset to be

registered.

The lamps are on.

Instruments

Retrieving the servicing information

For more information on Checking levels,

refer to the corresponding section.

Actions required related to a lack of

AdBlue^®

You can view the servicing information by

pressing the “Check" button in the Driving

/ Vehicle touch screen menu.

The following warning lamps light up when the

quantity of AdBlue^®is lower than the reserve level

corresponding to a range of 1,500 miles (2,400

km).

Together with the warning lamps, messages

regularly remind you of the need to top up to avoid

engine starting being prevented. Refer to the

Warning and indicator lamps section for details of

the messages displayed.

AdBlue^®range indicators

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle filter (DPF) for the

treatment of exhaust gases. They cannot function

without AdBlue^®fluid.

When the level of AdBlue^®falls below the reserve

level (between 1,500 and 0 miles (2,400 and

0 km)), a warning lamp lights up when the ignition

is switched on and an estimate of the distance

that can be travelled before engine starting is

prevented is displayed in the instrument panel.

Engine coolant temperature

indicator

For more information on AdBlue^®(BlueHDi

engines), and in particular on topping up,

refer to the corresponding section.

With the engine running:

Warning

lamps lit

Action

Remaining

driving range

– In zone A, the temperature is correct.

– In zone B, the temperature is too high; the

associated warning lamp and the central STOP

warning lamp come on in red on the instrument

panel, accompanied by the display of a message

and an audible signal.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

It is then no longer possible to start the engine

until the minimum level of AdBlue^®has been

topped up.

Top up.

Between

1,500 miles

and 500

miles (2,400

km and

800 km)

You must stop the vehicle as soon as it is safe to

do so.

Wait a few minutes before switching off the

engine.

Top up as

soon as

possible.

Between

Manual display of the range

500 miles

and 62 miles

(800 km and

100 km)

While the driving range is greater than 1,500 miles

(2,400 km), it is not displayed automatically.

You can view the range information by

pressing the "Check" button in the touch

screen’s Driving / Vehicle menu.

After switching off the ignition, carefully

open the bonnet and check the coolant

level.

Instruments

switching on the ignition for subsequent journeys,

while the cause of the fault persists.

To be able to restart the engine, contact a

Warning

lamps lit

Action

Remaining

driving range

dealer or a qualified workshop.

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

A top-up is

essential,

due to the

risk that the

engine will

be prevented

from

Between 62

miles and 0

miles (100

Power indicator (Electric)

km and 0 km)

Malfunction confirmed during the permitted

driving phase (between 685 miles and 0 miles

(1,100 km and 0 km))

starting.

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is confirmed.

The AdBlue warning lamp flashes, and an

"Emissions fault: Starting prevented in X miles”

message is displayed, indicating the driving range

in miles or kilometres.

While driving, the message is displayed every 30

seconds. The alert is repeated when switching on

the ignition.

To be able

to restart

the engine,

add at least

5 litres of

AdBlue^®to its

tank.

0 miles (km)

CHARGE

Traction battery charging during deceleration and

braking.

ECO

Moderate energy consumption and optimised

driving range.

POWER

Energy consumption by the drive train during

acceleration.

NEUTRAL

On switching on the ignition, your vehicle’s

electric drive train neither consumes nor

generates energy: after sweeping over the

indicator, the cursor returns to its "neutral"

position.

Malfunction of the SCR emissions control

system

You can continue driving for up to 685 miles

(1,100 km) before the engine immobiliser system

is triggered.

Malfunction detection

If a malfunction is detected,

these warning lamps come on,

accompanied by an audible

signal and an "Emissions fault”

message.

Have the system checked by a dealer or a

qualified workshop as soon as possible.

Starting prevented

Whenever the ignition is switched on, the

"Emissions fault: Starting prevented” message is

displayed.

The alert is triggered while driving, when the fault

is detected for the first time, and thereafter when

Instruments

With the ignition off, opening the driver's

door activates the indicator, which moves

to the "neutral" position.

►ꢀ View the remaining range on the instrument

panel.

►ꢀ Put the vehicle on charge as soon as possible.

2nd level: Critical

It concerns the following equipment and systems:

– Heating.

– Air conditioning.

– Front demisting/defrosting.

– Rear screen demisting/defrosting.

– Heated seats.

The state of charge of the traction battery

is critical.

Charge level indicator (Electric)

Fixed, together with the reserve warning lamp,

accompanied by an audible signal.

►ꢀ You must put the vehicle on charge.

The traction battery powers the heating and air

conditioning systems.

This equipment and these functions can be used:

– If the vehicle is not plugged in, when the READY

lamp is lit.

– If the vehicle is plugged in, when the ignition is

switched on.

Selecting Eco mode limits the performance of

some equipment. The cursor on the thermal

comfort consumption indicator then moves into

the "ECO" zone.

The remaining range is no longer

calculated. The drive train power

gradually decreases.

The heating and air conditioning are switched

off (even if the cursor indicating their

consumption is not at the ECO position).

The traction battery charge status and remaining Thermal comfort consumption

To quickly heat or cool the passenger

compartment, feel free to temporarily

select the maximum heating or cooling setting.

Excessive use of thermal comfort equipment,

particularly at low speed, can significantly

decrease the vehicle's range.

range are displayed continuously when the

indicator (Electric)

vehicle is started.

With the ignition off, opening the driver's

door activates the indicator.

Remember to optimise equipment settings

upon achieving the desired level of comfort,

and adjust them if necessary whenever you

start the vehicle.

After an extended period without using the

heating, you may notice a slight odour during

the first few minutes of use.

Associated warning lamps

Two successive alert levels indicate that the

energy available has dropped to a low level:

1st level: Reserve

The state of charge of the traction battery

is low.

Fixed, accompanied by an audible signal.

The gauge shows the consumption of electric

power for thermal comfort functions.

Instruments -> Indicators / Service indicator for Your DS 3 Crossback 4 Door First Generation (2018-2022)

Related Topics

Instruments

Popular Owner Manuals

Latest Owner Manuals