Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...).
The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.
Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Operation
going into engine STOP mode
Special cases: STOP mode not
available
The "ECO" warning lamp comes
on in the instrument panel and the
engine goes into standby:
STOP mode is not invoked when:
For your comfort, during parking
manoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
STOP mode does not affect the
functionality of the vehicle, such as for
example, braking, power steering...
-
-
-
the driver's door is open,
the driver's seat belt is not fastened,
the vehicle has not exceeded 6 mph
(10 km/h) since the last engine start using
the key,
-
-
with a manual gearbox, at speeds below
12 mph (20 km/h), when you put the gear
lever into neutral, and you release the
clutch pedal.
with a 5 or 6-speed electronic gearbox,
when stationary or at speeds below 5 mph
(8 km/h) (depending on version), when
you press the brake pedal or put the gear
selector in position n.
-
the engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
-
demisting is active,
some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key.
A time counter calculates the sum
of the periods in STOP mode during
a journey. It rests itself to zero every
time the ignition is switched on with
the key.
The "ECO" warning lamp flashes for
a few seconds then goes off.
This operation is perfectly normal.
English 
