2009-2016 DS 3 4 Door VISIBILITY -> Lighting controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

VISIBILITY -> Lighting controls for Your DS 3 4 Door First Generation (2009-2016)

Lighting controls  
System for selection and control of the various front and rear lamps providing the vehicle's lighting.  
Main lighting  
Programming  
The various front and rear lamps of the vehicle  
are designed to adapt the driver's visibility  
progressively according to climatic conditions:  
Various automatic lighting control modes  
are also available according to the following  
options:  
In some weather conditions (e.g. low  
temperature or humidity), the presence  
of misting on the internal surface of the  
glass of the headlamps and rear lamps  
is normal; it disappears after the lamps  
have been on for a few minutes.  
-
-
sidelamps, to be seen,  
dipped beam headlamps to see without  
dazzling other drivers,  
-
-
guide-me-home lighting,  
automatic illumination of headlamps.  
-
main beam headlamps to see clearly when  
the road is clear.  
Additional lighting  
Other lamps are installed to fulfil the  
requirements of particular conditions of  
visibility:  
-
-
-
a rear foglamp to be seen from afar,  
front foglamps for improved vision,  
LED lamps to be seen during the daytime.  
131  
Visibility  
Manual controls  
displays  
The lighting is controlled directly by the driver  
by means of the ring A and the stalk B.  
Lighting of the corresponding indicator lamp on  
the instrument panel confirms the switching on  
of the lighting selected.  
The instrument panel has permanent back-  
lighting. Illumination of the instrument panel is  
therefore not linked to the exterior lighting.  
A. Main lighting mode selection ring: turn it  
to position the symbol required facing the  
mark.  
Lighting off / daytime running lamps.  
Automatic illumination of headlamps.  
Sidelamps only.  
Model without AUTO lighting  
Dipped headlamps or main beam headlamps.  
B. Stalk for switching the headlamp beam:  
pull the stalk to switch between dipped and  
main beam headlamps.  
In the lamps off and sidelamps modes,  
the driver can switch on the main beam  
headlamps temporarily ("headlamp flash") by  
maintaining a pull on the stalk.  
Model with AUTO lighting  
C. Foglamp selection ring.  
The foglamps operate with the dipped and main  
beam headlamps.  
In good or rainy weather, by both day  
and night, the front foglamps and the  
rear foglamp are prohibited. In these  
situations, the power of their beams  
may dazzle other drivers.  
Front and rear foglamps  
Do not forget to switch off the front  
foglamps and the rear foglamp when  
they are no longer necessary.  
Rotate and release the ring C:  
F
F
F
F
forwards a first time to switch on the front  
foglamps,  
forwards a second time to switch on the  
rear foglamp,  
rearwards a first time to switch off the rear  
foglamp,  
rearwards a second time to switch of the  
front fog lamps.  
Model with front foglamps  
and a rear foglamp  
Lighting on audible warning  
When the ignition is switched off, all  
of the lamps switch off automatically,  
unless guide-me-home lighting is  
activated.  
If the lighting is switched on manually  
after switching off the ignition, there  
is an audible signal when a front door  
is opened to warn the driver that  
they have forgotten to switch off the  
vehicle's lighting, with the ignition off.  
When the lighting is switched off automatically  
(with AUTO model) or when the dipped  
headlamps are switched off manually, the  
foglamps and sidelamps will remain on.  
F
Turn the ring rearwards to switch off the  
foglamps, the sidelamps will then switch off.  
133  
Visibility  
Manual guide-me-home  
lighting  
Automatic illumination of  
headlamps  
Activation  
F
Turn ring to the "AUTO" position. The  
activation of the function is confirmed by  
the display of a message.  
deactivation  
F
Turn ring to a position other than "AUTO".  
The deactivation of the function is  
confirmed by the display of a message.  
The temporary illumination of the dipped beam  
headlamps after the vehicle's ignition has been  
switched off makes the driver's exit easier  
when the light is poor.  
The sidelamps and dipped beam headlamps  
are switched on automatically, without any  
action on the part of the driver, when a low level  
of external light is detected or in certain cases  
of activation of the windscreen wipers.  
As soon as the brightness returns to an  
adequate level or after the windscreen wipers  
are switched off, these lamps are switched off  
automatically and the daytime running lamps  
come on.  
Operating fault  
In the event of a fault with the  
sunshine sensor, the lighting come  
on, this warning lamp is displayed  
on the instrument panel and/or a  
message appears in the screen,  
accompanied by an audible signal.  
Switching on  
F
With the ignition off, "flash" the headlamps  
using the lighting stalk.  
F
A further "headlamp flash" switches the  
function off.  
Contact a CITROËN or a qualified workshop  
workshop.  
Switching off  
The manual guide-me-home lighting switches  
off automatically after a set time.  
LED daytime running lamps  
This daytime lighting, a signature of the vehicle,  
comprises two sets of light-emitting diodes  
(LEDs), located in vertical housings below each  
headlamp.  
Automatic "guide-me-  
home" lighting  
When the automatic illumination of headlamps  
functions is activated, if the ambient light level  
is low the dipped beam headlamps remain on  
when switching off the ignition.  
Settings  
Activation and deactivation, as well as the  
duration of the guide-me-home lighting can be  
set in the vehicle configuration menu (except  
for the monochrome screen A, for which the  
duration is fixed at 60 seconds).  
On starting the vehicle, in daylight the daytime  
running lamps come on automatically, if the  
lighting stalk is in position "0" or "AUTO".  
If the sidelamps and headlamps are switched  
on manually or automatically, the daytime  
running lamps go off.  
In fog or snow, the sunshine sensor  
may detect sufficient light. Therefore,  
the lighting will not come on  
automatically.  
Do not cover the sunshine sensor,  
coupled with the rain sensor and  
located in the centre of the windscreen  
behind the rear view mirror; the  
associated functions would no longer  
be controlled.  

Related Topics

Popular Owner Manuals