Get Ease of use and comfort -> Front seats Guide for DS 4 4 Door Second Generation (2021-2026)

03 ₉₂

Ease of use and comfort

Front seats

Manual adjustments

As a safety measure, seat adjustments should only be done when stationary.

Forwards-backwards

Seat height

Seat backrest angle

F

Raise the control and slide the seat

forwards or backwards.

Release the control to lock the position.

F

Pull the control upwards to raise or push

it downwards to lower, as many times as

necessary, to obtain the position required.

F

Turn the control knob to adjust the seat

backrest angle.

Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat.

There is a risk of trapping or pinching passengers if present in the rear seats or jamming the seat if large objects are placed on the floor behind

the seat.

03

93

Ease of use and comfort

Driver's seat electric

adjustments

The electrical functions of the driver's seat are deactivated approximately one minute after

the ignition is switched off.

To reactivate them, switch on the ignition.

Forwards-backwards

Cushion height and angle

Seat backrest angle

F

Push the control forwards or rearwards to

slide the seat.

F

Tilt the rear part of the control upwards or

downwards to obtain the required height.

Tilt the front part of the control upwards or

downwards to obtain the required angle.

F

Tilt the control forwards or rearwards to

adjust the angle of the seat backrest.

Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat.

There is a risk of trapping or pinching passengers if present in the rear seats or jamming the seat if large objects are placed on the floor behind

the seat.

03 ₉₄

Ease of use and comfort

Additional adjustments

Head restraint height and angle

Removing a head restraint

F

To remove the head restraint, press the

lug A and pull the head restraint upwards.

To put the head restraint back in place,

engage the head restraint stems in the

openings keeping them in line with the seat

back and press the lug A at the same time.

F

The head restraint is fitted with a frame

with notches which prevents it from

lowering; this is a safety device in case

of impact.

F

To raise a head restraint, pull it upwards.

To lower the head restraint, press the lug A

and the head restraint at the same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

The adjustment is correct when the

upper edge of the head restraint is

level with the top of the head.

F

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

03

95

Ease of use and comfort

Heated seats control

With the engine running, the front seats can be

heated separately.

Do not use the function if the seat is not

occupied.

Reduce the level of heating as soon as

possible.

Once the seat and passenger

compartment are at a comfortable

temperature, you can switch off the

function; reducing electric current

consumption also reduces fuel

consumption.

Prolonged use at the highest setting

is not recommended for those with

sensitive skin.

There is a risk of burns for those that

do not have normal perception of heat

(illness, taking medicines, ...).

There is a risk of overheating the

system if material with insulating

properties is used, such as cushions or

seat covers.

Do not use the system:

-

if wearing damp clothing,

if child seats are fitted.

To avoid breaking the heating element

in the seat:

F

Use the adjustment dial, placed on the side

of each front seat, to switch on and select

the level of heating required:

-

do not place heavy objects on the

seat,

0: Off.

1: Low.

2: Medium.

3: High.

-

do not kneel or stand on the seat,

do not place sharp objects on the

seat,

-

do not spill liquids onto the seat.

To avoid the risk of short-circuit:

-

do not use liquid products for

cleaning the seat,

never use the heating function

when the seat is damp.

03 ₉₆

Ease of use and comfort

Massage function

This function provides a back massage; it only

operates when the engine is running.

Manual lumbar adjustment

Electric lumbar adjustment

F

Press the switch to activate the function.

The warning lamp on the switch comes on and

the massage function is activated for a period

of 60 minutes. During this time, massage is

performed in 6 cycles of 10 minutes each cycle

(6 minutes of massage followed by 4 minutes

break).

F

Turn the knob to obtain the desired level of

lumbar support.

F

Press the front or rear of the control to

obtain the desired lumbar support.

After an hour, the function is automatically

deactivated. The warning lamp in the switch

goes off.

Deactivation

You can deactivate the massage function at

any time by pressing the switch. The movement

in progress continues until the initial non-

massage position is reached.

03

97

Ease of use and comfort

Storing driving positions

System which registers the electrical settings

of the driver's seat and door mirrors. It enables

you to store and recall two positions using the

buttons on the side of the driver's seat.

Storing a position

Recalling a stored position

Ignition on or engine running

Using buttons M / 1 / 2

F

Press button 1 or 2 to recall the

corresponding position.

An audible signal confirms that adjustment

is complete.

You can interrupt the current movement

by pressing button M, 1 or 2 or by using

one of the seat controls.

A stored position cannot be recalled

while driving.

Recalling stored positions is

deactivated 45 seconds after switching

off the ignition.

F

Switch on the ignition.

Adjust your seat and the door mirrors.

Press button M, then press button 1 or 2

within four seconds.

An audible signal indicates that the position

has been stored.

Storing a new position cancels the

previous position.

Ease of use and comfort -> Front seats for Your DS 4 4 Door Second Generation (2021-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals