Get In the event of a breakdown -> Changing a bulb Guide for DS 4 4 Door Second Generation (2021-2026)

₂₇₉08

In the event of a breakdown

Changing a bulb

The headlamps have polycarbonate

lenses with a protective coating:

Changing a bulb should only be done

after the headlamp has been switched

off for several minutes (risk of serious

burns).

Light-emitting diodes (LED)

For the replacement of this type of

lamp, go to a CITROËN dealer or a

qualified workshop.

LED (light-emitting diode) replacement

kits are available from CITROËN

dealers.

F

do not clean them using a dry

or abrasive cloth, nor with a

detergent or solvent product,

use a sponge and soapy water or a

pH neutral product,

F

Do not touch the bulb directly with

your fingers, use a lint-free cloth.

F

It is imperative to use only anti-

ultraviolet (UV) type bulbs to avoid

damaging the headlamp.

Always replace a failed bulb with a

new bulb with the same type and

specification.

when using a high pressure

washer on persistent marks, do not

keep the lance directed towards

the lamps or their edges for too

long, so as not to damage their

protective coating and seals.

Risk of electrocution

Xenon bulbs (D1S) must be replaced

by a CITROËN dealer or a qualified

workshop.

08 ₂₈₀

In the event of a breakdown

Front lamps

Model with directional xenon and

full-LED headlamps

Model with halogen headlamps

(type 1)

Model with halogen headlamp and

LED light signature (type 2)*

1. Direction indicators (LEDs).

2. Daytime running lamps / sidelamps

(LEDs).

3. Dipped beam headlamps (H7).

4. Main beam headlamps (H7).

5. Directional front foglamps (H11).

1. Direction indicators (H21 clear).

2. Dipped beam headlamps (H7).

3. Main beam headlamps (H1).

4. Daytime running lamps / sidelamps

(P21/5W XL).

1. Daytime running lamps / sidelamps

(LEDs).

2. Directional main beam / dipped beam

headlamps (D1S).

3. Direction indicators (LEDs).

4. Directional foglamps (LEDs).

5. Directional front foglamps (H11).

Bulbs with lugs, type H1, H7... take care

to position them correctly to ensure the

best lighting.

Bulbs with lugs, type H1, H7... take care

to position them correctly to ensure the

best lighting.

* LED: light emitting diodes.

₂₈₁08

In the event of a breakdown

Access to bulbs

Changing direction indicator bulbs

Model with halogen (type 2) and xenon

headlamps

For the replacement of this type of LED lamp,

contact a CITROËN dealer or a qualified

workshop.

Depending on the engine and only on the left

hand side, you must first carry out the following

operations for access to the protective covers

on the bulbs.

Rapid flashing of the direction indicator

warning lamp (right or left) indicates the

failure of a bulb on that side.

Model with halogen headlamps (type 1)

Amber coloured bulbs, such as the

direction indicators, must be replaced

with bulbs of identical specifications

and colour.

F

Remove the air deflector by unclipping

each of its three attachment points.

Unclip the bonnet release cable at its

two fixings.

F

Turn the bulb holder a quarter of a turn and

extract it.

Pull out the bulb and change it.

Move the cable down.

After changing the failed bulb, remember to

put everything back in place (cable and air

deflector).

To reassemble, carry out these operations in

reverse order.

08 ₂₈₂

In the event of a breakdown

Changing dipped beam headlamp

bulbs (on models with halogen

headlamps)

Changing main beam headlamp

bulbs (on models with type 1

halogen headlamps)

Changing main beam headlamp

bulbs (on models with type 2

halogen headlamps)

F

Remove the protective cover by pulling

the tab.

F

Remove the protective cover by pulling

the tab.

F

Remove the protective cover by pulling

the tab.

F

Disconnect the connector.

Spread the springs to release the bulb.

Pull the bulb out and change it.

F

Disconnect the connector.

Squeeze the springs to release the bulb.

Pull the bulb out and change it.

F

Disconnect the connector.

Pull the bulb out and change it.

To reassemble, carry out these operations in

reverse order.

To reassemble, carry out these operations in

reverse order.

To reassemble, carry out these operations in

reverse order.

When refitting, close the protective

cover carefully to preserve the sealing

of the headlamp.

₂₈₃08

In the event of a breakdown

Changing daytime running lamp /

sidelamp bulbs (on models with

type 1 halogen headlamps)

Changing daytime running lamp /

sidelamp bulbs (on models with

type 2 halogen or xenon headlamps)

Changing integrated direction

indicator side repeaters

For the replacement of this type of LED lamp,

contact a CITROËN dealer or a qualified

workshop.

F

Remove the protective cover by pulling

the tab.

Disconnect the wiring connector.

Turn the bulb holder a quarter of a turn and

extract it.

F

Insert a flat screwdriver towards the centre

of the repeater between the repeater and

the base of the mirror.

Tilt the flat screwdriver to extract the

repeater and remove it.

Disconnect the repeater connector.

F

Pull the bulb and change it.

To reassemble, carry out these operations in

reverse order.

To reassemble, carry out these operations in

reverse order.

Contact a CITROËN dealer or a qualified

workshop to obtain replacement repeaters.

08 ₂₈₄

In the event of a breakdown

Changing the side spotlamps

(LEDs)

Changing foglamp bulbs (on models

with halogen headlamps)

For the replacement of this type of light emitting

diode lamp, contact a CITROËN dealer or a

qualified workshop.

F

Introduce a flat screwdriver in the hole in

the finisher.

Pull and lever to unclip the bumper finisher.

Remove the two module fixing screws and

remove it from its housing.

To refit, carry out these operations in reverse

order.

To replace these bulbs you may also contact a

CITROËN dealer or a qualified workshop.

F

Disconnect the bulb holder connector.

Turn the bulb holder a quarter of a turn and

extract it.

F

Pull the bulb and change it.

₂₈₅08

In the event of a breakdown

Rear lamps

Changing stop lamp, reversing lamp and direction indicator bulbs

1. Brake lamps (P21/5W).

2. Sidelamps (LEDs)*.

These three bulbs are changed from inside the boot:

3. Direction indicators (PY21W amber).

4. Reversing lamp (P21W).

5. Rear foglamps (P21W).

F

open the boot,

F

unclip the two small secondary connectors,

spread the two tabs and remove the bulb

holder,

remove the access grille from the

corresponding side trim panel,

slacken the two nuts using a 10 mm tube

spanner then remove the nuts by hand,

unclip the lamp unit connector,

extract the lamp unit carefully pulling in its

middle towards the outside,

F

turn the bulb a quarter of a turn and change it.

Amber bulbs, such as those for the

direction indicators, must be replaced

by bulbs of the same rating and colour.

The lamps on the tailgate, other than

the guide lamps, are dummy units.

They are there for aesthetic purposes

only.

To reassemble, carry out these operations in

reverse order.

F

Take care to engage the lamp unit in its guides,

while keeping it in line with the vehicle.

Tighten sufficiently to ensure sealing, but

without forcing, so as to avoid damaging

the lamp.

F

remove the foam seal,

* LED: light-emitting diodes.

08 ₂₈₆

In the event of a breakdown

Changing the light guides /

sidelamps

Number plate lamps (W5W)

Third brake lamp (LEDs)

To facilitate the removal of the lamp, carry out

this operation with the tailgate half open.

For the replacement of this type of light-

emitting diode lamp, contact a CITROËN dealer

or a qualified workshop.

For the replacement of this type of light emitting

diode lamp, contact a CITROËN dealer or a

qualified workshop.

F

Insert a thin screwdriver into the lens

cutout.

F

Push it outwards.

Remove the lens.

Change the faulty bulb.

To refit, press on the lens to clip it in place.

₂₈₇08

In the event of a breakdown

Changing foglamp bulbs

Take care not to touch the silencer;

there is a risk of burns if changing a

bulb within a few minutes of switching

off the ignition.

These bulbs are replaced from outside the rear

bumper:

F

pass your hand under the bumper,

turn the bulb holder a quarter turn and

remove it,

F

turn the bulb a quarter turn, pull it out and

fit a new bulb.

For reassembly, carry out these operations in

reverse order.

In the event of a breakdown -> Changing a bulb for Your DS 4 4 Door Second Generation (2021-2026)

Related Topics

In the event of a breakdown

Popular Owner Manuals

Latest Owner Manuals