08 288
In the event of a breakdown
Changing a fuse
Access to the tools
Changing a fuse
Before changing a fuse:
F
F
F
F
the cause of the failure must be identified
and rectified,
all electrical consumers must be
switched off,
the vehicle must be immobilised with the
ignition off,
identify the failed fuse using the tables and
layout drawings in the following pages.
Good
Failed
The extraction tweezer is fitted to a carrier
clipped to the dashboard fusebox cover.
For access to it:
To replace a fuse, you must:
Tweezer
F
use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F
F
open the glove box lid,
unclip the carrier on the fusebox cover by
pulling on the right,
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.
F
always replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a CITROËN dealer or a qualified workshop.
F
remove the tweezer.
English 
