Instruments -> Service indicator for Your DS 4 4 Door Second Generation (2021-2026)

01  
34  
Instruments  
Service indicator  
More than 1800 miles (3000 km) remain  
before the next service is due  
When the ignition is switched on, no service  
information appears in the instrument panel  
central screen.  
Between 600 miles (1 000 km)  
and 1800 miles (3 000 km) remain  
before the next service is due  
For a few seconds after the ignition is switched  
on, the spanner symbolising the service  
operations comes on. The distance recorder  
display line or a specific message in the  
instrument panel central screen indicates the  
distance remaining before the next service is due.  
For example: 1 700 miles (2 800 km) remain  
before the next service is due.  
For a few seconds after the ignition is switched  
on, the screen indicates:  
System that informs the driver when the  
next service is due, in accordance with the  
manufacturer's service schedule.  
The point at which the service is due is  
calculated from the last service indicator zero  
reset, according to the distance covered and  
the time elapsed since the last service.  
For BlueHDi Diesel versions, the level of  
deterioration of the engine oil may also be  
taken into account, depending on the country  
of sale.  
A few seconds after the ignition is switched on,  
the spanner goes off; the distance recorder  
resumes its normal operation. The screen then  
indicates the total and trip distances.  
01  
35  
Instruments  
Less than 600 miles (1 000 km) remain  
before the next service is due  
Example: 560 miles (900 km) remain before  
the next service is due.  
For a few seconds after the ignition is switched  
on, the screen indicates:  
Service overdue  
The spanner comes on if you have  
For a few seconds after the ignition is switched on,  
the spanner flashes to indicate that the service  
must be carried out as soon as possible.  
Example: the service is overdue by 180 miles  
(300 km).  
exceeded the specified time interval  
since the last service, as indicated in  
the manufacturer's service schedule.  
For BlueHDi Diesel versions,  
the spanner may also come on before  
the normal service point, according to  
the level of deterioration of the engine  
oil, which depends on the driving  
conditions in which the vehicle is used.  
For a few seconds after the ignition is switched  
on, the screen indicates:  
A few seconds after the ignition is switched  
on, the distance recorder resumes its normal  
operation. The spanner remains on to  
indicate that a service must be carried out  
soon.  
A few seconds after the ignition is switched  
on, the distance recorder resumes its normal  
operation. The spanner remains on.  
For BlueHDi Diesel versions, this alert is also  
accompanied by the fixed illumination of the  
Service warning lamp when the ignition is  
switched on.  
01  
36  
Instruments  
Service indicator zero reset  
Recalling the service information  
(type 2 instrument panel)  
You can recall the service information at any  
time.  
After each service, the service indicator must  
be reset to zero.  
This operation cannot be carried  
out while a reminder of the servicing  
information is being displayed.  
Following this operation, if you wish to  
disconnect the battery, lock the vehicle  
and wait at least five minutes for the  
zero reset to be registered.  
F
Briefly press the ".../000" trip distance  
recorder zero reset button.  
The service information is displayed for a  
few seconds in the central screen of the  
type 2 instrument panel.  
If you have carried out the service on your  
vehicle yourself:  
F
F
switch off the ignition,  
press and hold the ".../000" trip distance  
recorder zero reset button,  
F
F
switch on the ignition; the distance recorder  
display begins a countdown,  
when the screen indicates "=/0" and the  
spanner disappears, release the button.