Instruments -> Touch screen tablet for Your DS 4 4 Door Second Generation (2021-2026)

01  
51  
Instruments  
Touch screen tablet  
This system gives access to:  
General operation  
Recommendations  
-
menus for adjusting settings for vehicle  
functions and systems,  
Principles  
-
-
audio and display settings menus,  
audio system and telephone controls and  
the display of associated information.  
the display of the ambient temperature  
(a blue snowflake appears if there is a risk  
of ice),  
It is necessary to press firmly, particularly for  
"flick" gestures (scrolling through lists, moving  
the map...). A light wipe is not enough.  
The screen does not recognise pressing with  
more than one finger.  
Press the virtual buttons in the touch screen  
tablet.  
Each menu is displayed over one or two pages  
(primary page and secondary page).  
-
-
This technology allows use at all temperatures  
and when wearing gloves.  
Use the "OPTIONS" button to go to the  
secondary page.  
the display of the trip computer.  
Do not use pointed objects on the touch screen  
tablet.  
Do not touch the touch screen tablet with wet  
hands.  
Uses a soft clean cloth to clean the touch  
screen tablet.  
After a few moments with no action on  
the secondary page, the primary page  
is displayed automatically.  
And, depending on equipment, it also allows:  
-
the display of visual parking sensors  
information,  
-
access to the controls for the navigation  
system and Internet services, and the  
display of associated information.  
Use this button for access to  
additional information and to the  
settings for certain functions.  
As a safety measure, the driver  
should only carry out operations  
that require close attention, with the  
vehicle stationary.  
Use this button to confirm.  
Use this button to quit or to return to  
the primary page.  
Some functions are not accessible  
when driving.  
01  
52  
Instruments  
Menus  
Press one of the buttons on the control panel  
for direct access to a particular menu.  
Driving  
Gives access to the trip computer  
and, depending on version, allows  
settings to be adjusted for certain  
functions.  
Navigation  
Radio Media  
Telephone  
Connected services  
1. Volume / mute.  
The connected services are  
accessible via Bluetooth,  
Wi-Fi, CarPlay™ or MirrorLink™  
connections.  
For more information on the touch screen  
tablet, refer to the Audio and telematics  
section.  
Settings  
Allows configuration of the display  
and the system.  
01  
53  
Instruments  
"Driving" menu  
The systems with settings that can be adjusted are detailed in the table below.  
For more information on one of these functions, refer to the corresponding section.  
Button  
Corresponding function  
Speed settings  
Comments  
Memorisation of speeds for use with the speed limiter or cruise control.  
Vehicle settings  
Access to other functions with settings that can be adjusted. The functions are grouped  
together under three tabs:  
-
"[Driving assistance]"  
-
"[Automatic parking brake]": activation/deactivation of the electric parking brake  
automatic mode,  
-
"[Automatic rear wiper in reverse]": activation/deactivation of rear wiper coupled to  
reverse gear.  
-
"[Lighting]"  
-
"[Guide-me-home lighting]": activation/deactivation and configuration of the duration of  
the automatic guide me home lighting,  
-
-
"[Welcome lighting]": activation/deactivation of the exterior welcome lighting,  
"[Adaptive lighting]": activation/deactivation of the directional lighting or of the static  
intersection lighting,  
-
"[Vehicle access]"  
-
"[Driver plip action]": activation/deactivation of the selective unlocking of the driver's  
door,  
-
Unlock boot only": activation/deactivation of the selective unlocking of the boot.  
Select or deselect the tabs at the bottom of the screen to filter the functions required.  
01  
54  
Instruments  
"Settings" menu  
The functions available through this menu are detailed in the table below.  
Button  
Corresponding function  
Audio settings  
Comments  
Adjustment of volume, balance...  
Color schemes  
Turn off screen  
System Settings  
Choice of colour scheme.  
Turns off the display in the the touch screen tablet (black screen).  
Pressing the black screen restores the display.  
Choice of units:  
-
-
temperature (°Celsius or °Fahrenheit)  
distance and fuel consumption (l/100 km, mpg or km/l).  
Time/Date  
Setting the date and time.  
Languages  
Screen settings  
Calculator  
Calendar  
Choice of language used: French, English, Italian, Spanish, German, Dutch, Portuguese,  
Polish, Turkish, Russian, Serb, Croat, Hungarian.  
Adjustment of the display settings (scrolling of text, animations...)  
Display the calculator.  
Display the calendar.  
01  
55  
Instruments  
Setting the date and time  
F
F
Select the "Settings" menu.  
F
Select "Adjust time" or "Adjust date".  
F
F
Modify the settings using the number  
keypad, then confirm.  
Press "Confirm" to save and quit.  
In the secondary page, press on "Time/  
Date".  
When setting the time, you can select  
"Satellite synchronisation", so that  
the time is adjusted automatically by  
satellite reception.  
01  
56  
Instruments  
Trip computer  
System that gives you information on the current journey (range, fuel consumption…).  
Monochrome screen C  
Information displays  
You can choose between two types of display  
by pressing button A:  
-
the trip computer information appears  
temporarily above the audio information,  
displayed permanently in full screen,  
F
Press the button, located at the end of  
the wiper stalk, to display the various trip  
computer tabs in succession.  
or  
-
the trip computer and audio information  
both appear permanently in a shared  
screen.  
01  
57  
Instruments  
Trip zero reset  
-
the current information tab with:  
● the range,  
● the current fuel consumption,  
● the Stop & Start time counter.  
F
When the trip required is displayed, press  
the button on the end of the wiper stalk for  
more than two seconds.  
-
the trip "1" tab with:  
● the distance travelled,  
● the average fuel consumption,  
● the average speed,  
for the first trip.  
Trips "1" and "2" are independent but their use  
is identical.  
For example, trip "1" can be used for daily  
figures, and trip "2" for monthly figures.  
-
the trip "2" tab with:  
● the distance travelled,  
● the average fuel consumption,  
● the average speed,  
for the second trip.  
01  
58  
Instruments  
Type 2 instrument panel central screen  
Information displays  
Trip zero reset  
-
Display of instantaneous information with:  
● the range,  
● the current fuel consumption,  
● Stop & Start time counter,  
Display of trip "1" with:  
● the distance travelled,  
● the average fuel consumption,  
● the average speed,  
F
Press the button, located on the end of  
the wiper stalk to display the following  
information in turn:  
● reminder of the speed,  
● instantaneous information,  
● trip "1",  
F
When the required trip is displayed, press  
the button on the end of the wiper stalk for  
more than two seconds.  
Trips "1" and "2" are independent but their use  
is identical.  
For example, trip "1" can be used for daily  
figures and trip "2" for monthly figures.  
-
● trip "2",  
● information on the current audio source,  
● black screen,  
for the first trip.  
-
Display of trip "2" with:  
● the distance travelled,  
● the average fuel consumption,  
● the average speed,  
● navigation instructions.  
for the second trip.  
01  
59  
Instruments  
Touch screen tablet  
Temporary display in a new window:  
Trip reset  
F
Press the end of the wiper control stalk for  
access to the information and display the  
different tabs.  
The current instantaneous fuel consumption tab with:  
-
-
-
the range,  
the current fuel consumption,  
the Stop & Start time counter.  
F
When the desired trip is  
displayed, press the reset button  
or press and hold the end of the  
wiper control stalk.  
1. "Instantaneous".  
2. "Trip 1".  
3. "Trip 2".  
The trip "1" tab with:  
-
-
-
the distance travelled.  
the average fuel consumption,  
the average speed,  
4. "00.0 / Reset".  
Trips "1" and "2" are independent but their use  
is identical.  
for the first trip.  
For example, trip "1" can be used for daily  
figures, and trip "2" for monthly figures.  
The trip "2" tab with:  
Display of information  
Permanent display:  
-
-
-
the distance travelled.  
the average fuel consumption,  
the average speed,  
F
Select the "Driving" menu.  
for the second trip.  
The trip computer information is displayed in  
the primary page of the menu.  
F
Press one of the buttons to display the  
desired tab.  
01  
60  
Instruments  
A few definitions…  
Range  
Current fuel consumption  
Average speed  
(miles or km)  
(mpg or l/100 km or km/l)  
(mph or km/h)  
The distance which can still be travelled with  
the fuel remaining in the tank (at the average  
fuel consumption seen over the last few miles  
(kilometres) travelled).  
Calculated over the last few seconds.  
Calculated since the last trip computer reset.  
Distance travelled  
(miles or km)  
This function is only displayed from  
20 mph (30 km/h).  
This value may vary following a change  
in the style of driving or the relief,  
resulting in a significant change in the  
current fuel consumption.  
Calculated since the last trip computer reset.  
Average fuel consumption  
(mpg or l/100 km or km/l)  
Stop & Start time counter  
(minutes / seconds or hours /  
minutes)  
Calculated since the last trip computer reset.  
When the range falls below 20 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the  
range is recalculated and is displayed if it  
exceeds 60 miles (100 km).  
A time counter calculates the time spent in  
STOP mode during a journey.  
It resets to zero every time the ignition is  
switched on.  
If dashes are displayed continuously  
while driving in place of the digits,  
contact a CITROËN dealer or a  
qualified workshop.