GETTING TO KNOW YOUR VEHICLE -> MIRRORS for Your Fiat 500 C 2 Door Second Generation (2016-2020)

34 GETTING TO KNOW YOUR VEHICLE  
STEERING WHEEL  
Push down on the lever to unlock the column. With one  
hand firmly on the steering wheel, move the steering  
column up or down as desired. Push the lever up to lock  
the column firmly in place.  
Tilt Steering Column — If Equipped  
This feature allows you to tilt the steering column upward or  
downward. The tilt control lever is located on the left-side of  
the steering column, below the turn signal controls.  
WARNING!  
Do not adjust the steering column while driving.  
Adjusting the steering column while driving or driv-  
ing with the steering column unlocked, could cause the  
driver to lose control of the vehicle. Failure to follow  
this warning may result in serious injury or death.  
MIRRORS  
Inside Day/Night Mirror  
The mirror can be adjusted up, down, left, and right for  
various drivers. The mirror should be adjusted to center on  
the view through the rear window.  
Tilt Control Lever  
GETTING TO KNOW YOUR VEHICLE 35  
Headlight glare from vehicles behind you can be reduced by  
moving the small control under the mirror to the night  
position (toward the rear of the vehicle). The mirror should be  
adjusted while set in the day position (toward the wind-  
shield).  
Automatic Dimming Mirror — If Equipped  
This mirror automatically adjusts for headlight glare from  
vehicles behind you. You can turn the feature on or off by  
pushing the button at the base of the mirror. The on/off  
symbol on the button will illuminate when the auto-  
dimming feature is enabled.  
3
NOTE: This feature is disabled when the vehicle is moving  
in REVERSE.  
Adjusting Rearview Mirror  
Automatic Dimming Mirror Power Button  
36 GETTING TO KNOW YOUR VEHICLE  
The power mirror controls consist of a mirror select switch  
and a four-way mirror control switch. To adjust a mirror,  
push the mirror select switch to either the L (left) or R  
(right) to select the mirror you need to adjust.  
CAUTION!  
To avoid damage to the mirror during cleaning, never  
spray any cleaning solution directly onto the mirror.  
Apply the solution onto a clean cloth and wipe the  
mirror clean.  
Using the mirror control switch, push on any of the four  
arrows for the direction that you want the mirror to move.  
Power Mirrors  
WARNING!  
The power mirror controls are located on the driver’s door  
trim panel.  
Vehicles and other objects seen in the passenger side  
convex mirror will look smaller and farther away than  
they really are. Relying too much on your passenger  
side convex mirror could cause you to collide with  
another vehicle or other object. Use your inside mirror  
when judging the size or distance of a vehicle seen in  
the passenger side convex mirror.  
Power Mirror Switches  
GETTING TO KNOW YOUR VEHICLE 37  
Folding Mirrors  
Heated Mirrors — If Equipped  
The exterior mirrors are hinged to allow the mirror to pivot  
forward or rearward to help avoid damage. The mirror has  
three detent positions: full forward, normal and full rear-  
ward.  
These mirrors are heated to melt frost or ice. This  
feature will be activated whenever you turn on the  
rear window defroster (if equipped). Refer to “Climate  
Controls” in “Getting To Know Your Vehicle” for further  
information.  
3
Spotter Mirror — If Equipped  
Some models are equipped with a driver’s side spotter  
mirror. The spotter mirror allows for a greater range of  
visibility on the driver’s side of the vehicle.  
EXTERIOR LIGHTS  
Multifunction Lever  
The multifunction lever, located on the left side of the  
steering wheel, controls the operation of the headlights,  
headlight beam selection, passing light and turn signals.  
NOTE: The headlights can only be turned on with the  
ignition in the ON/RUN position.  
Spotter Mirror