GETTING TO KNOW YOUR VEHICLE -> VEHICLE SECURITY ALARM for Your Fiat 500 C 2 Door Second Generation (2016-2020)

22 GETTING TO KNOW YOUR VEHICLE  
VEHICLE SECURITY ALARM  
the vehicle security alarm will automatically disarm.  
After approximately three seconds, the vehicle security  
light will flash. This shows that the vehicle security  
alarm is fully armed.  
The vehicle security alarm monitors the vehicle doors for  
unauthorized entry and the ignition switch for unauthor-  
ized operation. While the vehicle security alarm is armed,  
interior switches for door locks and liftgate release are  
disabled. If something triggers the alarm, the vehicle  
security alarm will provide the following audible and  
visible signals: the horn will pulse, the park lamps and/or  
turn signals will flash, and the vehicle security light on the  
instrument panel will flash.  
The activation of the vehicle security alarm is followed by  
a self-diagnosis stage. If a fault is detected during the  
self-diagnosis stage, the horn will sound a second time.  
If the horn sounds a second time, check that all doors, hood  
and liftgate are closed correctly, then rearm the system.  
If the vehicle security alarm sounds the horn a second time  
even when all doors, hood and liftgate are correctly closed,  
a fault has occurred in the operation of the system. Contact  
an authorized dealer.  
To Arm The System  
1. Remove the key from the ignition switch and get out of  
the vehicle.  
To Disarm The System  
2. Lock the door using either the Central Lock/Unlock  
switch or the Remote Keyless Entry key fob and close all  
doors.  
Push unlock on the key fob, or insert the key into the  
ignition switch and turn the ignition switch to the ON/  
RUN position.  
3. The horn will sound and the vehicle security light in the  
instrument cluster will switch on for approximately  
three seconds. This shows that the vehicle security  
alarm is about to arm. During this period, if a door is  
opened, the ignition switch is turned to ON/RUN, or  
the power door locks are unlocked in any manner,  
NOTE: The vehicle security alarm will not disarm when  
the metal insert of the key is used on a single door lock  
cylinder.  
GETTING TO KNOW YOUR VEHICLE 23  
The vehicle security alarm is designed to protect your  
vehicle; however, you can create conditions where the  
vehicle security alarm will arm unexpectedly. If you remain  
in the vehicle and lock the doors with the key fob, once the  
vehicle security alarm is armed, when you pull the door  
handle to exit, the alarm will sound. If this occurs, push the  
unlock button on the key fob to disarm the vehicle security  
alarm.  
3
Central Lock/Unlock (Switch Safe Lock Device) —  
If Equipped  
This safety device prevents the operation of the interior  
door handles and the door locking/unlocking button.  
Safe Lock Device Location  
It prevents the opening of the doors from inside the  
passenger compartment, serving as an obstacle to break-in  
attempts (e.g. broken window).  
Activating The Safe Lock Device  
The Safe Lock device is enabled on all the doors by quickly  
double-pushing the lock button on the key fob.  
We recommend that you activate the Safe Lock device each  
time you park your car.  
The direction indicators flash three times and the LED  
above the button flashes to indicate that the Safe Lock  
device has been activated. If one or more of the doors are  
not closed correctly, the Safe Lock device will not activate,  
preventing a person from getting stuck inside the passen-  
ger compartment by entering the car through, and then  
closing, the open door.  
24 GETTING TO KNOW YOUR VEHICLE  
Deactivating The Safe Lock Device  
The Safe Lock device deactivates automatically:  
1. By pushing the unlock button on the key fob.  
2. By turning the ignition key to the MAR position.  
DOORS  
Manual Lock  
To lock each door from the inside, push the inside door  
handle toward the door until the red lock indicator is  
visible. To unlock the doors from the inside, pull the inside  
door handle to the first detent or until the lock symbol is no  
longer visible.  
Manual Lock/Unlock Switch  
NOTE: The manual lock knob unlocks each individual  
door separately.  
If the lock symbol is visible when the door is shut, the door  
will lock. Therefore, make sure the key fob is not inside the  
vehicle before closing the door.  
WARNING!  
When exiting the vehicle, always remove the key fob  
from the vehicle and lock your vehicle.  
Never leave children alone in a vehicle, or with  
access to an unlocked vehicle.  
(Continued)