Advertisement

Advertisement

Operating Your Vehicle -> Extending Your Driving Range Per Charge for Your Fiat 500 E 4 Door First Generation (2013-2019)

OPERATINGYOURVEHICLE  
EXTENDING YOUR DRIVING RANGE PER CHARGE  
A little knowledge will go a long way to extend your driving range on the 500e. First and  
foremost understand that the drive system and cabin temperature management features  
use the most energy from the high voltage battery. Reducing energy draw from these  
features are the easiest and most effective way to extend driving range.  
Just like a conventional vehicle, 500e likes to keeps things smooth and steady for most  
efficient operation.When driving, avoid aggressive driving styles and high speeds for ex-  
tended times.When practical, choose surface streets over the highway, work to maintain  
a steady speed to extend range.  
The 500e uses high voltage components to heat and cool the cabin, so a little awareness  
can go a long way to extend range.When using automatic climate control, consider set-  
ting temperatures a few degrees higher or lower during hot and cold days. If your 500e  
has been soaking in hot or cold temperatures for an extended period, it is recommended  
that the car be preconditioned via the mobile application while still plugged into a charg-  
ing source.This will allow 500e to use external power to establish a comfortable cabin  
temperature before the drive, and allow the battery to maintain the temperature using  
significantly less energy.  
Additional tips:  
keep tires properly inflated  
avoid carrying nonessential cargo  
be mindful of adding external accessories that may increase aerodynamic drag  
perform all scheduled maintenance at recommended intervals  
Driving Status Gauge  
1 — Power  
2 — ECO  
3 — Charge  
28  
Downloaded from www.Manualslib.com manuals search engine  
OPERATINGYOURVEHICLE  
To help the driver extend the driving range of the high voltage battery your vehicle is  
equipped with a Driving Status Gauge.The gauge is located on the right side of the in-  
strument cluster.The gauge contains three driving ranges:  
Power  
The gauge will move into the Power range when under acceleration.  
ECO  
The gauge will move into the ECO range when you are maximizing the driving range of  
the high voltage battery.  
Charge  
The gauge will move into the Charge range when battery regeneration is active (either  
coasting or braking).  
TURN SIGNAL/LIGHTS/HIGH BEAM LEVER  
Turn Signal/Lane Change Assist  
Tap the lever up or down once and the turn signal (right or left) will flash briefly to indi-  
cate a lane change and automatically turn off.  
Headlights/Parking Lights  
The ignition switch must be in the ON/RUN position for the headlights to operate.  
Rotate the end of the lever to the first detent for parking lights and headlight operation.  
High Beams  
Push the lever forward to activate the high beams.  
A high beam symbol will illuminate in the cluster to indicate the high beams are on.  
29  
Downloaded from www.Manualslib.com manuals search engine