Get MULTIMEDIA -> 6.5" UCONNECT RADIO NAV Guide for Fiat 500 X 4 Door First Generation (2014-2024)

6.5" Uconnect Radio Nav

.

QUICK GUIDE

Controls on front panel

F1B0004C

168

232

Button

1 -

Functions

Mode

Switching on

Brief button press

Switching off

Volume adjustment

Left/right rotation of knob

Brief button press

2 -

3 -

4 -

5 -

Volume activation/deactivation (Mute/Pause)

Display on/off

Brief button press

Settings

Exit the selection/return to previous screen

Scrolling the list or tuning to a radio station

Confirmation of the option displayed

Left/right rotation of knob

Brief button press

6 - BROWSE ENTER

7 - APPS

Access to the additional functions (display of Time,

Compass, Outside temperature, Media Player and

UConnect™ LIVE services, where provided)

Brief button press

8 - PHONE

9 - NAV

Phone data display

Brief button press

Access to the Navigation menu

Source selection: USB/iPod or AUX, Bluetooth® and

SD (where provided)

10 - MEDIA

11 - RADIO

Brief button press

Access to the Radio mode

233

Steering wheel controls (where provided)

The controls for the main system functions are present on the steering wheel to make control easier.

The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as

described in the table below.

F1B0213C

169

234

Button

Interaction

❒ Acceptance of incoming call

❒ Acceptance of the second incoming call and putting the active call on hold

❒ Activation of voice recognition

❒ Interruption of the voice message in order to give a new voice command

❒ Interruption of voice recognition

❒ Interaction with Radio, Media and Navigation functions

❒ Rejection of incoming call

❒ Ending of call in progress

235

Buttons

Interaction

Button A (left side, behind the steering wheel)

❒ Brief button press: search for next radio station or selection of USB/iPod next track.

Upper button

Central button

❒ Long button press: scan of higher frequencies until released/fast forward of USB/

iPod track.

With each press it scrolls through sources AM, FM, USB/iPod, AUX and SD (where

provided). Only the available sources will be selected.

❒ Brief button press: search for previous radio station or selection of next track on

USB/iPod and SD (where provided).

Lower button

❒ Long button press: scan of lower frequencies until released/fast forward of track on

USB/iPod and SD (where provided).

Button B (right side, behind the steering wheel)

Volume increase

❒ Brief button press: single volume increase.

Upper button

Central button

Lower button

❒ Long button press: fast volume increase.

Activation/deactivation of Mute function

Volume decrease

❒ Brief button press: single volume decrease.

❒ Long button press: fast volume decrease.

236

SWITCHING THE SYSTEM

ON/OFF

At the top: display of the stored radio

station (preset) list. If the current station

is in the list of presets, it will be

highlighted on the display.

Previous/next radio

station fast search

The system is switched on/off by

pressing the (ON/OFF) button/knob.

Turn the button/knob clockwise to

increase the radio volume or

To start the fast search press the

button on the display, or use the

corresponding steering wheel controls.

or

In the middle: the name of the radio

station being listened to and the

buttons to select the previous or the

next radio station are displayed.

At the bottom: display of the following

buttons:

AM/FM radio station

tuning

anticlockwise to decrease it.

RADIO (TUNER) MODE

Press the "tune" button, then select the

first digit of the desired radio station.

The system has the following tuners:

AM, FM and DAB (where provided).

Press the

button to delete a wrong

❒ "browse": search available radio

stations

number (and enter the correct station

number).

Radio mode selection

❒ "tune" : manual radio station tuning

(not available for DAB radios);

Press the RADIO button on the front

panel to activate radio mode.

The different tuning modes can be

selected with the corresponding button

on the display.

After entering the last digit of the station

the system will tune to the selected

one.

❒ "audio": access to the "Audio

settings" screen

The screen disappears automatically

after 5 seconds or manually by pressing

the OK button.

❒

and

the desired radio station.

: permit searching for

Up to 12 favourite radio stations can be

stored in each mode.

DAB radio (where

provided)

Select previous/next

radio station

Selecting a frequency

band

Once DAB radio mode is selected, the

information on the current station is

displayed and the following functions.

The "browse" button is used to display:

The previous/next radio station can be

selected using the following methods:

turning the BROWSE ENTER

Press one of the buttons at the left of

the display to select the frequency

band: AM, FM and DAB (where

provided).

button/knob, briefly pressing the

button on the display, pressing of

the buttons behind the steering wheel.

or

❒ the list of all DAB stations;

❒ the list of all the favourites;

Indications on display

Holding down the

or

buttons

After the desired radio station is

selected, the following information is

shown on the display:

❒ the list of stations filtered by

"Ensembles" (broadcast group).

Within each list, the "ABC" button

allows the user to skip to the desired

letter in the list.

on the display activates rapid scrolling

through the active frequency band.

237

The "Refresh" button requests an

update of the DAB radio station list: the

update may last from a few seconds

to about two minutes.

❒ "Auto-On radio" (allows you to set

the automatic switching on of the radio

when the engine is started).

Fast forward/rewind

through tracks

Hold down the button to fast

forward the selected track.

To exit the "audio" menu, press the

/Done button.

Hold down the

rewind the track.

button to fast

Pre-selection settings

MEDIA MODE

Presets are available in all system

modes and are activated by touching

one of the preset buttons located in the

upper area of the display.

Track selection

(browse)

Audio source selection

Press the "choose source" button to

select the desired audio source among

those available: AUX, USB / iPod, SD

(where provided) or Bluetooth®.

Note: Applications used on portable

devices may be not compatible with the

Uconnect™system.

Use this function to scroll through and

select the tracks on the active device.

Within each list, the "ABC" button

allows the user to skip to the desired

letter in the list.

The system can store up to 12 radio

stations in each mode: 4 of these

are displayed in the upper area.

Press the "browse" button on the

display to show all the radio stations

stored in the selected frequency band.

Press the "Browse" button to activate

this function on the source being

played.

Track change

(next/previous)

Audio Settings

Turn the BROWSE ENTER button/knob

to select the desired category and

then press the button/knob to confirm

the selection.

The Audio Settings menu, which can be

accessed by pressing the "audio"

button at the bottom of the display, can

be used to change the following

settings:

Briefly press the

button or turn the

BROWSE ENTER button/knob

clockwise to play the next track.

Briefly press the

button or turn the

Press the "X" button to cancel the

function.

BROWSE ENTER button/knob

anticlockwise to return to the beginning

of the selected track or to the beginning

of the previous track (if this has been

played for less than 8 seconds).

❒ "Balance/Fader" (left/right and

front/rear audio balance adjustment);

NOTE The "Browse" button may be

disabled for some Apple® devices.

NOTE The "Browse" button does not

allow any operation on an AUX device.

NOTE Not all Bluetooth® devices

enable you to scroll the information on

the tracks.

❒ "Equaliser" (where provided);

❒ "Speed/Volume" (speed-dependent

automatic volume control);

❒ "Surround Sound" (where provided);

❒ "AUX Volume comp.";

❒ "Loudness" (where provided);

238

Track information

display

❒ search for Uconnect™ on the Blue-

tooth® audio device (during the pairing

stage a screen is displayed showing the

progress of the operation);

USB/iPod SOURCE

USB/iPod mode

Press the "Info" button to show the

information on the track being listened

to on the display.

To activate the USB/iPod mode insert

the corresponding device (USB or iPod)

in the USB port located on the central

tunnel (fig. 170).

❒ when requested by the audio device,

enter the PIN code shown on the

system display or confirm on the device

the PIN displayed;

Press the "X" button to exit the screen.

Shuffle

Press the ">" button then the "Shuffle"

button to play the tracks on the USB

/ iPod, SD (where provided) or Blue-

tooth® in a random order.

Press the "Shuffle" button again to

deactivate the function.

❒ if the pairing procedure is completed

successfully, a screen is displayed.

Answer "Yes" to the question to pair the

Bluetooth® audio device as favourite

(the device will have priority over all

other devices to be paired subse-

quently). If "No" is selected, the priority

is determined according to the order of

connection. The last device connected

will have the highest priority;

Repeat

Press the ">" button then the "Repeat"

button to listen to the track again.

Press the "Repeat" button again to

deactivate the function.

F1B0210C

170

❒ an audio device can also be paired

by pressing the

Some versions feature a second USB

port, located inside the front armrest.

PHONE button

on the front panel and by selecting

"Settings" or, from the "Settings" menu,

selecting "Phone/Bluetooth".

Bluetooth® SOURCE

SD Card SUPPORT

(where provided)

Pairing a Bluetooth®

audio device

To activate SD mode, insert an SD Card

in the dedicated slot on the vehicle

(see fig. 171).

Proceed as follows:

IMPORTANT If the Bluetooth® con-

nection between mobile phone and

system is lost, consult the mobile

phone owner's handbook.

❒ activate the Bluetooth® function on

the device;

IMPORTANT Only use SD cards

dedicated to a single function (e.g. SD

cards for navigation exclusively

❒ Press the MEDIA button on the front

panel;

❒ if the "Media" source is active, press

the "Source" button;

separate from SD cards for MP3 use

exclusively). Avoid transferring content

from one SD card to another.

❒ select the Bluetooth® Media

source;

❒ press the "Add Device" button;

239

PHONE MODE

Pairing a mobile phone

Activating the Phone

mode

Proceed as follows:

❒ activate the Bluetooth® function on

the mobile phone;

Press the PHONE button on the front

panel to activate the Phone mode.

The buttons on the display can be used

to:

❒ press the PHONE button on the front

panel;

❒ if no phone is paired with the system

yet, the display shows a dedicated

screen;

❒ compose the phone number (using

the graphic keypad on the display);

F1B0211C

171

❒ display and call the contacts in the

mobile phone phonebook;

❒ select "Yes" to start the pairing

procedure, then search for the

Uconnect™ device on the mobile

phone (if "No" is selected, the Phone

main screen is displayed);

AUX SUPPORT

❒ display and call contacts from the

registers of recent calls;

To activate AUX mode, connect an

appropriate device to the AUX socket

on the vehicle.

❒ pair up to 10 phones to make access

and connection easier and quicker;

❒ when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display

or confirm on the mobile phone the PIN

displayed;

Adjust the volume using the (ON/

OFF) button/knob on the front panel or

using the volume adjustment control

on the connected device.

❒ transfer calls from the system to the

mobile phone and vice versa and

deactivate the microphone audio for

private conversations.

IMPORTANT

❒ from the "Phone" screen you can

always pair a mobile phone by pressing

the "Settings" button: press the "Add

Device" button and proceed as

described above;

The mobile phone audio is transmitted

through the vehicles’s audio system;

the system automatically mutes the

radio when the Phone function is used.

NOTE For the list of compatible mobile

phones and functions supported,

consult the www.driveuconnect.eu

website

The functions of the device connected

with the AUX socket are directly

managed by the device itself: it is not

possible to change track/folder/playlist

or control playing start/end/pause

with the controls on the front panel or

on the steering wheel.

❒ during the pairing stage a screen is

displayed showing the progress of

the operation;

Do not leave the cable of your portable

player connected to the AUX socket

after disconnection, to avoid possible

hiss from the speakers.

240

❒ when the pairing procedure is

The list of SMS messages received

from the mobile phone can be

General information

completed successfully, a screen is

displayed: answer "Yes" to the question

to pair the mobile phone as favourite

(the mobile phone will have priority over

all other mobile phones to be paired

subsequently). If no other devices are

paired, the system will consider the first

associated device as favourite.

The general information about the

vehicle is displayed in the central part of

the display:

accessed by pressing the

button.

APPS MODE

❒ the outside temperature, expressed

in the selected unit of measurement;

Press the APPS button on the front

panel to display the following settings:

❒ mobile phone battery charge (when a

mobile is paired);

❒ Media/Radio mode

❒ Clock

❒ the icon (if a Bluetooth® device is

connected);

❒ General information

❒ Compass

Making a phone call

Proceed as follows:

❒ phone network signal intensity (if a

mobile phone is connected).

❒ Trip

❒ selecting the

phone phonebook);

icon (mobile

❒ App (where present) (for further

information see what indicated in

paragraph Uconnect™ Radio Live 5" -

Uconnect™ Radio Nav Live 5")

Compass

❒ selecting "Recent Calls";

❒ selecting the icon;

Press the "Compass" button to display

the direction in which you are driving

and "Navigation mode" information.

❒ pressing the "Redial" button.

The operations described above can

only be accessed if supported by

the mobile phone in use.

Media/Radio mode

Trip

Pressing the button on the left side of

the display allows you to display the

"Media and Radio" information.

Press the "Trip" button to access the

screens containing the Trip Computer

information processed by the

instrument panel.

SMS MESSAGE READER

Clock

The system can read the messages

received by the mobile phone.

Pressing the time at the middle of the

top of the display allows you to set the

time.

SETTINGS

To use this function the mobile phone

must support the SMS exchange

function through Bluetooth®.

Press the

button on the front panel

to display the "Settings" menu.

NOTE The menu items displayed can

vary according to the versions.

The menu includes the following items:

If this function is not supported by the

phone, the corresponding

deactivated (greyed out).

button is

When a text message is received, the

display will show a screen where the

options "Listen", "Call" or "Ignore" can

be selected.

❒ Display;

❒ Units;

❒ Voice commands;

241

❒ "Frnt Coll. Warning" (where provided):

allows you to select the Full Brake

Control system operation mode. The

options available are:

- "Sound & Display": the system warns

the driver that an obstacle is present

through acoustic (via the speakers

in the vehicle) and visual (on the

instrument panel) warnings.

❒ Clock & Date;

❒ Safety & Driving Assistance;

❒ Lights;

❒ Doors & Locks;

- "Off": the system is deactivated;

- "Only warning": the system intervenes

only by providing the driver with a

warning (where provided);

❒ Vehicle Shutdown Options;

❒ Audio;

❒ "Front Park Assist vol." (where

provided): allows you to select the

volume of the acoustic warnings for the

front Park Assist system;

❒ Phone/Bluetooth;

❒ Sirius XM Setup (where provided);

❒ Radio Setup;

- "Only active braking": the system

intervenes by activating automatic

braking (where provided);

❒ "Rear Park Assist vol." (where

provided): allows you to select the

volume of the acoustic warnings for the

rear Park Assist system,

❒ System Information;

❒ Restore Default Settings;

❒ Clear Personal Data.

- "Warning + active braking": the

system intervenes by providing the

driver with a warning and activating

automatic braking.

❒ "Lane Assist Warning" (where

provided): allows you to select the Lane

Assist system intervention readiness;

Driving safety and

assistance (where

provided)

❒ "Forward Collision System Sensitivity"

(where provided): allows you to select

the intervention readiness for the

system according to the distance of the

obstacle. The options available are

"Near", "Med", "Far".

❒ "Lane Assist Strength" (where

This function can be used to carry out

the following adjustments:

provided): allows you to select the force

to apply to the steering wheel to put

the vehicle back in the lane through the

electric steering system, in the event

of Lane Assist system intervention.

❒ "Rear View Camera" (where

provided): allows you to activate the

display of images from the camera

when reverse is engaged.

❒ "Park Assist" (where provided): allows

you to select the type of warning

provided by the Park Assist system.

The available options are:

❒ "Side Assist" (where provided): allows

you to select the type of warning from

the Side Sensor system. The options

available are:

❒ "Rear view camera delayed

deactivation" (where provided): allows

you to delay the disappearance of

images from the rear camera when

reverse is disengaged.

- "Sound Only": the system warns the

driver that an obstacle is present

through acoustic warnings only, via the

speakers in the vehicle;

- "Off": the system is off;

- "Sound Only": the system warns the

driver that an obstacle is present

through acoustic warnings only, via the

speakers in the vehicle;

❒ "Guidelines for load platform camera"

(where provided): allows you to

activate dynamic grids that indicate the

route of the vehicle.

242

❒ "Follow me" (where provided):

permits the setting of the headlamp

deactivation delay after switching off

the engine;

❒ "Emergency": it searches for

Hospitals or Police Stations located

near the destination. It is also possible

to view your current position on the

display and save, in "Favourites", the

location of the Hospitals or Police

Stations.

- "Sound & Display": the system warns

the driver that an obstacle is present

through acoustic (via the speakers

in the vehicle) and visual (on the

instrument panel) warnings.

❒ "Courtesy lights": activation/

deactivation of courtesy lights (where

provided);

❒ "Side Assist volume" (where

provided): allows you to select the

volume of the acoustic warnings from

the Side Sensor system.

VIEW MAP

❒ "Day lights": activation/deactivation of

the daytime running lights (DRLs)

(where provided);

Press the "View Map" button in the

main Navigation Menu to display the

map relative to the current position.

When the display shows the map, the

following options are available:

❒ "Rain sensor" (where provided):

allows you to activate/deactivate the

automatic switching on of the wipers in

the case of rain.

❒ "Auto high beams" (where provided):

allows you to deactivate the main

beam headlights when approaching a

vehicle coming from the opposite

direction;

❒ "Brakes" (where provided): this

function can be used to select the

following submenus:

❒ "Menu": press this button to return

to the main Navigation Menu;

❒ "Flash Lights w/Lock" (where

provided): permits the activation of light

flashing when the doors are locked.

❒ "+/–": press the "+" or " –" button to

change the dimension of the map (it

is not possible to zoom in on minor

roads);

- "Brake Service" (where provided):

allows you to activate the procedure for

carrying out braking system servicing;

- "Electric Park Brake" (where

provided): allows you to activate/

deactivate the electric park brake

engagement.

MAIN NAVIGATION MENU

❒ "Time of Arrival/Time to

IMPORTANT Navigation maps are

pre-loaded on the system, therefore no

external medium is needed.

Destination/Distance" (only during

navigation): press this button at the top

right of the display to view one of the

following options: "Time of Arrival",

"Time to Destination", "Distance".

Lights (where provided)

To activate the main navigation menu,

press the NAV button on the front

panel, then press one of the following

buttons:

This function can be used to carry out

the following adjustments:

❒ "Turn List" (only during navigation):

press the list of turns along the route

at the middle of the top of the display.

Select a turn through the following

options: "Show on Map" or "Avoid

Street".

❒ "Interior lights" (where provided):

allows you to select the interior light

brightness;

❒ "Where to?": it searches or navigates

to the destination;

❒ "Headlamp sensor" (where provided):

adjustment of headlamp activation

sensitivity;

❒ "View map": it displays the map;

❒ "Info": it displays all info about

navigation;

243

❒ "Options": press this button to

display the map display options.

IMPORTANT The volume of the voice

commands can only be adjusted while

they are being reproduced by operating

button/knob (ON/OFF).

INFORMATION

Press the "Information" button in the

main Navigation Menu to select from

the following information:

The navigation system uses voice

commands for some or all of the

following functions:

❒ Where Am I?

❒ driving information;

❒ Traffic

❒ set warnings.

Two types of voices are available during

navigation:

❒ "Trip comp." (Trip Computer)

You can press the

button to return

to the previously active screen or the

"X" button to exit.

❒ computer voices: they are generated

by the navigation system. They read

responses to voice commands and

traffic;

EMERGENCY

Press the "Emergency" button in the

main Navigation Menu to select one of

the following options for searching

for and navigating towards a

destination:

❒ human voices: which have been

recorded by an actor and provide

instructions about the route only.

❒ "Hospital": press this button to set a

trip to a hospital near the destination;

❒ "Police": press this button to set

a trip to a police station near the

destination.

VOICE COMMANDS

For the functions controlled with voice

commands see the Uconnect™ 5"

Radio Nav "Voice commands"

paragraph.

NOTE For languages not supported by

the system, voice commands are not

available.

244

MULTIMEDIA -> 6.5" UCONNECT RADIO NAV for Your Fiat 500 X 4 Door First Generation (2014-2024)

Related Topics

MULTIMEDIA

Popular Owner Manuals

Latest Owner Manuals