Advertisement

Advertisement

MULTIMEDIA -> TIPS, CONTROLS AND GENERAL INFORMATION for Your Fiat 500 X 4 Door First Generation (2014-2024)

prevent any liquid from entering the  
system: this could damage it beyond  
repair.  
The secret code is made up of four  
digits, from 0 to 9: to insert the first digit  
of the code, turn the "BROWSE  
ENTER" right knob and press  
to confirm.  
TIPS, CONTROLS  
AND GENERAL  
INFORMATION  
ROAD SAFETY  
80) 81)  
Learn how to use the various system  
functions before setting off.  
ANTI-THEFT  
PROTECTION  
After inserting the fourth digit, move the  
cursor to "OK" and press the  
"BROWSE ENTER" right knob: the  
system will start to operate.  
Read the instructions for the system  
carefully before setting off.  
The system is equipped with an  
anti-theft protection system based on  
the exchange of information with the  
electronic control unit (Body Computer)  
on the vehicle.  
If an incorrect code is entered, the  
system displays "Incorrect Code" to  
notify the user of the need to enter the  
correct code.  
185) 186)  
RECEPTION CONDITIONS  
Reception conditions change  
constantly while driving. Reception may  
be interfered with by the presence of  
mountains, buildings or bridges,  
especially when you are far away from  
the broadcaster.  
This guarantees maximum safety and  
prevents the secret code from being  
entered after the power supply has  
been disconnected.  
After the 3 available attempts to enter  
the code, the system displays  
"Incorrect Code. Radio locked. Wait for  
30 minutes". Once the text has  
disappeared you can start the code  
entering procedure again.  
If the check has a positive outcome, the  
system will start to operate, whereas if  
the comparison codes are not the  
same or if the electronic control unit  
(Body Computer) is replaced, the  
system will ask the user to enter the  
secret code according to the procedure  
described in the paragraph below.  
IMPORTANT The volume may be  
increased when receiving traffic alerts  
and news.  
Vehicle radio passport  
(UconnectRadio Nav 6.5" excluded)  
This document certifies ownership of  
the system. The vehicle radio passport  
shows the system model, serial number  
and secret code.  
CARE AND  
MAINTENANCE  
Observe the following precautions to  
ensure the system is fully operational:  
Entering the secret code  
(UconnectRadio Nav 6.5" excluded)  
In the case of loss of the vehicle radio  
passport, contact the Fiat Dealership,  
taking an ID document and the vehicle  
ownership documents.  
the display lens should not come into  
contact with pointed or rigid objects  
which could damage its surface; use a  
soft, dry anti-static cloth to clean and  
do not press.  
When the system is switched on, if the  
code is requested, the display will  
show "Please enter Anti-Theft Code"  
followed by the video page showing  
a keypad to enter the secret code.  
never use alcohol, petrols and  
derivatives to clean the display lens.  
208  
81) Do not use the display as a base for  
supports with suction pads or adhesives  
for external navigators or smartphones  
or similar devices.  
IMPORTANT Keep the vehicle radio  
passport in a safe place so that you  
can give the information to the relevant  
authorities if the system is stolen.  
IMPORTANT  
Look at the screen only when it is  
necessary and safe. If you need to look  
at the screen for a long time, pull over  
to a safe place so as not to be  
distracted while driving.  
Immediately stop using the system in  
the event of a fault. Otherwise the  
system might be damaged. Contact a  
Fiat Dealership as soon as possible  
to have the system repaired.  
WARNING  
185) Follow the safety rules below:  
otherwise serious injuries may occur to the  
occupants or the system may be  
damaged.  
186) If the volume is too loud this can be  
dangerous. Adjust the volume so that  
you can still hear background noises (e.g.  
horns, ambulances, police vehicles, etc.).  
WARNING  
80) Only clean the front panel and the  
display lens with a soft, clean, dry,  
anti-static cloth. Cleaning and polishing  
products may damage the surface. Never  
use alcohol, petrols and derivatives.  
209