72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
2. Begin with the top in the fully closed position (using
manual mode).
CAUTION!
Failure to follow these cautions may cause interior
water damage, stains or mildew on the top material:
• Avoid high-pressure car washes, as they can dam-
age the top material. Also, increased water pres-
sure may force water past the weather strips.
• Remove any standing water from the top and dry
the surface before opening it. Operating the top,
opening a door or lowering a window while the
top is wet may allow water to drip into the
vehicle’s interior.
3. Hold the open button to move the top to the fully
open position.
4. Continue to hold the open button for an additional
three seconds.
5. Release the open button.
6. Hold the closed button to move the top to the fully
closed position.
7. Continue to hold the closed button until the top
begins to cycle fully open, then release the closed
button.
• Use care when washing the vehicle, water pres-
sure directed at the weather strip seals may cause
water to leak into the vehicle’s interior.
At the end of step 7 the top will automatically cycle to
the fully open position, and then close to the 1/4 open
position.
Power Convertible Top Relearn Procedure
If your power convertible top does not operate in the
Auto Opening/Closing mode (automatically opening/
closing to the one-quarter open and three-quarter open
comfort stops), or if the remote keyless power top
function is inoperable, or if the trunk lid does not open
- the following relearn procedure may be necessary.
This will confirm that the relearn procedure was suc-
cessful.
Auto open/close will now be functional, as well as
trunk lid operation, and remote keyless power top
function.
1. Confirm that the door/trunk lid are closed.
NOTE: DO NOT interrupt this activity.
English 