Advertisement

Advertisement

Understanding The Features Of Your Vehicle -> Tilt Steering Column ? If Equipped for Your Fiat 500 SUV First Generation (2007-2019)

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91  
TILT STEERING COLUMN — IF EQUIPPED  
This feature allows you to tilt the steering column  
upward or downward. The tilt control lever is located  
on the left-side of the steering column, below the turn  
signal controls.  
3
Rear Wiper Operation  
NOTE: The windshield wipers/washers will only op-  
erate with the ignition in the ON/RUN position.  
Rear Windshield Washer Operation  
Push the windshield wiper/washer lever toward the  
instrument panel to activate the rear washer. Push and  
hold the lever for more than a half second and the  
wipers will activate automatically for three cycles after  
the lever is released.  
Tilt Control Lever  
Push down on the lever to unlock the column. With one  
hand firmly on the steering wheel, move the steering  
column up or down as desired. Push the lever up to  
lock the column firmly in place.  
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE  
WARNING!  
Do not adjust the steering column while driving.  
Adjusting the steering column while driving or  
driving with the steering column unlocked, could  
cause the driver to lose control of the vehicle.  
Failure to follow this warning may result in serious  
injury or death.  
SPEED CONTROL  
When engaged, the Speed Control takes over accelera-  
tor operations at speeds greater than 25 mph (40 km/h).  
Speed Control Buttons  
NOTE: In order to ensure proper operation, the Speed  
Control system has been designed to shut down if  
multiple Speed Control functions are operated at the  
same time. If this occurs, the Speed Control system can  
be reactivated by pushing the Speed Control ON/OFF  
button and resetting the desired vehicle set speed.  
The Speed Control buttons are located on the right side  
of the steering wheel.  
To Activate  
Push the ON/OFF button. The cruise control indicator  
light in the instrument cluster display will illuminate.  
To turn the system off, push the ON/OFF button a