Get GETTING TO KNOW YOUR VEHICLE -> Seats and seat adjustments Guide for Fiat Doblo Van 2000-2009

MAIN BEAMS (blue)

Once you have released

the lever, check that the

seat is firmly locked in the

runners by trying to move it back

and forth. Failure to lock the seat

in place could result in the seat

moving suddenly and dangerous-

ly.

INDIVIDUAL

SETTINGS

1

The warning light turns on

when the main beams are

turned on.

DRIVER’S SEAT

POSSIBLE PRESENCE OF ICE

ON THE ROAD

(versions with reconfigurable

multifunction display)

Only make adjustments

This indication starts flashing when

the outside temperature reaches or

falls below 3°C to warn the driver of

the possible presence of ice on the

road.

when the vehicle is sta-

tionary.

Adjusting the reclining seat

back

Lift lever E-fig. 50.

Moving the seat backwards or

forwards

The display will show the dedicated

message.

Lift the lever A-fig. 50 and push the

seat forwards or backwards. You are

in the correct position for driving when

your hands are resting on the steering

wheel rim and your arms are slightly

bent.

LIMITED RANGE

(versions with reconfigurable

multifunction display)

The display will show the dedicated

message to warn the driver that the

cruising range is less than 50 km.

fig. 50

GETTING TO KNOW YOUR VEHICLE

48

Driver’s seat with armrest and

adjustable lumbar support

fig. 51

Electrically heated driver’s seat

fig. 50

FIXED PASSENGER SEAT

Adjusting the reclining seat back

Press button B to switch the seat

heating on and off.

The armrest can be lifted or lowered

F.

Lift lever A-fig. 52.

The LED on the button will light up

when the function is on.

The lumbar support can be adjusted

to better support you back. Turn knob

G to adjust.

Height adjustment

Move lever C-fig. 50 upwards to

raise the front seat section and move

lever D upwards to raise the rear seat

section. Move the levers downwards to

lower the seat.

IMPORTANT The seat shall not

be occupied when raising, whereas

you must be seated when lowering it.

Only make adjustments

when the vehicle is sta-

tionary.

A

fig. 51

fig. 52

GETTING TO KNOW YOUR VEHICLE

49

SLIDING PASSENGER SEAT

Once you have released

the lever, check that the

seat is firmly locked in the

runners by trying to move it back

and forth. Failure to lock the seat

in place could result in the seat

moving suddenly and dangerous-

ly.

Tipping the seat

To tip the seat and make more space

in the passenger compartment pro-

ceed as follows:

Adjusting the reclining seat

back

Lift lever A-fig. 52.

– tip the seat as described previous-

ly;

Moving the seat backwards or

forwards

– use lever B-fig. 55 to tip the whole

seat forward;

Lift lever B-fig. 53 and push the seat

backwards or forwards.

– lock the seat using the special rod

A-fig. 56 and fitting it into slot B on

the seat.

FOLDING FRONT

PASSENGER SEAT

To return the seat to normal posi-

tion, release rod A and then raise the

seat.

Folding the seat back

Lift lever A-fig. 54 to fold the seat

back and obtain a tabletop.

IMPORTANT When folded, the

seat shall be anchored by the proper

rod ‘ to prevent its violent returning

to original position when accelerating.

B

fig. 53

fig. 54

GETTING TO KNOW YOUR VEHICLE

50

PARTITIONS

Fixed partition with window

Fastening the ladder: Tip the seat

as described previously, release the

ladder C-fig. 57 from its housing us-

ing lever E and fasten it to handle D-

fig. 58 on the seat. Make sure it is fas-

tened well.

Certain Fiat Doblò Cargo panelled

versions fit a fixed panel with central

window through which stability of the

load in the compartment can be

checked.

Fixed panel partition

Certain Fiat Doblò Cargo panelled

versions fit a fully panelled partition.

IMPORTANT When folded, the

seat shall be anchored to the ladder to

prevent its violent returning to the

original position when accelerating.

Driver’s protection ladder

Certain Fiat Doblò Cargo versions fit

a fixed ladder for protecting the dri-

ver if the load in the compartment is

unstable.

Double ladder

Certain Fiat Doblò Cargo versions fit

a split ladder for protecting the driving

if the load in the compartment is un-

stable and allows to extend loading

space on passenger side.

fig. 55

fig. 56

fig. 57

GETTING TO KNOW YOUR VEHICLE

51

Releasing the ladder: press but-

ton E-fig. 59 to release the ladder

from the handle D. Reposition the lad-

der in its original position. Tip the seat

by lowering the cushion and lifting the

seat back. Make sure that the seat is

locked.

ACCESSING

THE REAR SEATS

In the event of an emer-

gency, you can get out of

the rear seats from the

driver’s side by tilting the driver’s

seat.

Versions with one sliding side

door (on passenger side)

From passenger’s side: open the

sliding side door.

Versions with two sliding side

doors

From driver’s side: pull handle F-

fig. 59a upwards to tip the seat back.

Open either of the two sliding side

doors to access the rear seats.

Once you have let go of the lever,

check that the seat is firmly locked in

the runners by trying to move it back

and forth.

The ladder shall only be

tilted with the vehicle sta-

tionary and the door

open.

You cannot open the

left-hand sliding side door

while refuelling when the

flap is open (see “At the filling

station” in this section).

C

E

D

E

D

fig. 58

fig. 59

fig. 59a

GETTING TO KNOW YOUR VEHICLE

52

7-seat versions

IMPORTANT It is forbidden to

travel with the second row seats

tipped and third row seats set in nor-

mal position of use. More particularly,

if the central seat of the second row

is tipped and that of the third row is

set in normal position of use, a buzzer

will sound to indicate the wrong seat

position.

TAILGATE EMERGENCY

OPENING

To access the third row:

– open the side sliding door;

On versions with front seats that do

not fold over, there is an opening de-

vice inside the tailgate to allow the oc-

cupants to evacuate the rear seats in an

emergency. To unlock the tailage, op-

erate device A illustrated in the fig. 60

from inside the load compartment.

– lower the head restraints (if set in

the normal position of use) (see para-

graph “Head restraints”);

– release lever A-fig. 59b and fold

the seat forward onto the cushion;

– raise the whole cushion fig. 59c.

To get out of the vehicle, reverse the

above operations and make sure head

restraints are lowered.

It is absolutely forbidden

to travel with the second

row seats tipped and pas-

sengers seated on the third row

seats (as specified on the seat la-

bel).

fig. 59b

fig. 59c

fig. 60

GETTING TO KNOW YOUR VEHICLE

53

Download User Manual App

GETTING TO KNOW YOUR VEHICLE -> Seats and seat adjustments for Your Fiat Doblo Van 2000-2009

Related Topics

GETTING TO KNOW YOUR VEHICLE

Popular Owner Manuals

Latest Owner Manuals