SUN VISORS fig. 101
IMPORTANT Do not position on
the tilting shelf objects heavier than 3
kg: for safety purposes the shelf is re-
leased from its housing when submit-
ted to excessive loads.
Never travel with the
shelf tilted. The shelf or
the objects on it can
cause injuries in the event of a
crash.
The sun visors A are positioned to
the sides of the rear-view mirror.
They can swing up and down, as
shown. A ticket pocket can be found
on the back of the sunvisor driver's
side. A courtesy mirror is applied to
the back of the sun visors.
Resetting the shelf
(after releasing)
Proceed as follows:
TILTING SHELF (for passengers
transport versions, where
provided)
– fit the shelf B-fig. 101b so that the
support fixed pin A is fitted inside the
shelf left rail;
Behind the front passenger seatback,
it is available (on certain versions) a
tilting shelf A-fig. 101a.
– turn the shelf B until the lower
edge is touching the support A mobile
pin C;
To position it horizontally, pull it to-
wards the direction shown by the ar-
rows; reverse this operation to repo-
sition it.
– press slightly in arrow direction to
set the shelf B in the position of use.
Pin C is inside the shelf right rail.
fig. 101a
A
fig. 100
fig. 101
fig. 101b
GETTING TO KNOW YOUR VEHICLE
71
English 