Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

SAFETY -> OCCUPANT PROTECTION SYSTEMS for Your Fiat Doblo Van 2010-2022

To unfasten the seat belts, press button  
C. Guide the seat belt with your hand  
while it is rewinding, to prevent it from  
twisting.  
OCCUPANT  
PROTECTION  
SYSTEMS  
SEAT BELTS  
USING THE SEAT BELTS  
All vehicle seats are equipped with seat  
belts with three anchor points and a  
retractor. The retractor mechanism  
operates locking the belt in the event of  
sharp braking or strong deceleration  
due to an impact.  
The most important safety equipment  
of the vehicle comprises the following  
protection systems:  
60) 61)  
seat belts;  
SBR (Seat Belt Reminder) system;  
head restraints;  
This allows the belt strap to slide freely  
and to adapt to the body of the  
occupant. In the event of an accident,  
the belt will lock reducing the risk of  
impact inside the passenger  
child restraint systems;  
front airbags and side bags.  
Read the information given the  
following pages with the utmost care. It  
is of fundamental importance that the  
protection systems are used in the  
correct way to guarantee the maximum  
possible safety level for the driver and  
the passengers.  
compartment and of being projected  
outside the vehicle. The driver is  
responsible for respecting, and  
ensuring that all the other occupants of  
the vehicle also respect, the local laws  
in force in relation to the use of the seat  
belts.  
F0V0023  
120  
The retractor may lock up when the  
vehicle is parked on a steep slope: this  
is perfectly normal. Furthermore, the  
retractor mechanism locks the belt if it  
is pulled sharply or in the event of  
sudden braking, collisions and  
high-speed bends.  
Always fasten the seat belts before  
setting off.  
The seat belt should be worn keeping  
the chest straight and rested against  
the backrest.  
All rear seats (for Doblò/Doblò Combi  
versions) are fitted with inertia seat belts  
with three anchor points and a  
retractor.  
To fasten the seat belts, hold the  
tongue A fig. 120 and insert it into the  
buckle B, until it clicks into place.  
If the seat belt jams during removal, let  
it rewind for a short stretch, then pull  
it out again without jerking.  
The rear seat belts (for Doblò/Doblò  
Combi versions) must be worn as  
shown in fig. 121 - fig. 122.  
104