Get Knowing the Instrument Panel -> Digital Display Guide for Fiat Fiorino SUV Third Generation (2015-2026)

stop the engine and contact a Fiat

Note Buttons

and

activate

Dealership.

different functions according to the

following situations:

10)

Headlight alignment adjustment

With the dipped beam headlights on,

IMPORTANT

press button

to adjust

headlight alignment.

10) If the needle for the engine coolant

temperature reaches the red area, stop

the engine immediately and contact a Fiat

Dealership.

Setup menu

within the menu, they allow you to

scroll up or down through the options;

to increase or decrease values during

settings.

129

F0T0811

CONTROL BUTTONS

DIGITAL DISPLAY

STANDARD SCREEN

The standard screen fig. 129 shows

the following information:

A Headlamp alignment position (only

with dipped headlamps on).

B Milometer (display of kilometres, or

miles, travelled).

SETUP MENU

Setup menu functions

The menu comprises a series of

functions arranged in a "circular way",

which can be selected through the

and

buttons to access the

different selection operations and

settings (setup) given in the following

paragraphs.

130

F0T0500

C Time.

D START&STOP function indicator (for

versions/markets where provided)

E Gear Shift Indication (for

versions/markets, where provided).

F Petrol operation (Natural Power

versions).

The menu can be activated by pressing

To scroll up through the screen

and the related options or to increase

the displayed value.

the SET

button briefly.

Single presses on the

buttons will scroll the setup menu

options.

Management modes differ according

to the characteristic of the option

selected.

and

SET

Press briefly to access the

menu and/or go to next screen or

confirm the selection. Hold down to go

back to the standard screen.

To scroll down through the screen

and the related options or to decrease

the displayed value.

G Trip computer data.

Note With key removed (when opening

at least one of the front doors) the

display turns on and shows the time

and distance covered for a few

seconds.

The menu includes the following items:

ILLU

SPEEd

Hour

bUZZ

press the SET

display will show the wording ILLU;

press button and to set the

required brightness level;

press the SET button briefly

to return to the menu screen or hold

the button down to go back to the

standard screen without saving.

button briefly: the

Hold the SET button pressed

quit the set up menu if you are in the

menu;

quit the displayed menu if you are

setting an option;

Unit

BAG P (for versions/markets, where

provided)

Selecting a menu option

press the SET

select the menu setting you wish to

change;

press the

(with single presses) to select the new

setting;

press the SET

store the new setting and at the same

time go back to the previously selected

menu option.

save only the changes already stored

by the user (and confirmed by pressing

the SET

button).

button briefly to

Setting a speed limit (SPEEd)

This function is used to set a speed

limit (km/h or mph); the driver is

alerted when this limit is exceeded

(see “Warning lights and messages”

in the "Knowing the instrument panel"

chapter).

The set-up menu page is timed. When

the menu is exited due to expiry of the

time allowed, only the changes already

stored by the user (and confirmed by

and

buttons

pressing the SET

button briefly) will

be saved.

From the standard screen, press

button briefly to

the SET

browsing.

Press

button briefly to start

To set the desired speed limit, proceed

as follows:

or to browse within the

the SET

button briefly: the

Selecting “Set Clock”

menu.

display will show the wording (SPEED)

and the unit (km/h) or (mph) previously

set;

press the SET

select the first value to change (hours);

press the and buttons

(with single presses) to select the new

setting;

button briefly to

Note Only the short menu can be

accessed while the vehicle is moving

for reasons of safety ("SPEEd" setting).

Stop the vehicle to access the full

menu.

press

limit activation (On) or deactivation (Off);

if the function is On, press or

to select the required speed limit

to select speed

press the SET

button briefly to

Adjusting the vehicle interior

lighting (ILLU)

store the new setting and at the same

time go to the next set-up menu option

(minutes);

after setting the values with the same

procedure, go back to the previous

menu item.

and then press SET

to confirm;

Nota The speed may be set in the

range from 30 to 200 km/h, or from 20

to 125 mph according to the previously

chosen unit (see “Setting the unit of

measurement” below). The setting will

increase/decrease by five units each

This function is available with the

dipped beam headlights on to adjust

brightness of the instrument panel,

buttons and radio display.

Proceed as follows to adjust the light

intensity:

time the

Hold down the

button is pressed.

button to

the button down to go back to the

standard screen without saving.

automatically increase/decrease the

setting rapidly.

Complete the adjustment with single

presses of the button when you

approach the desired value.

Passenger front airbag

and chest-pelvis side bag

activation/deactivation (Bag P) (for

versions/markets, where provided)

This function is used to

activate/deactivate the front passenger

airbag.

Adjusting the buzzer volume (bUZZ)

This function is used to adjust

the volume of the acoustic signal

(buzzer) that sounds in the event of

failure/warning indications and when

press the SET

button briefly

to return to the menu screen or hold

the button down to go back to the

standard screen without saving.

To cancel the setting, proceed as

follows:

Proceed as follows fig. 131:

the SET

and

buttons

press the SET

button and,

are pressed.

To set the desired volume, proceed as

follows:

after the message BAG P OFF (to

deactivate) or BAG P On (to activate) is

displayed by pressing buttons

, press SET again;

a confirmation request message will

appear on the display;

briefly press the SET

button

press the SET

display will show the wording (bUZZ)

- press or to select the

button briefly: the

briefly to make the display flash (On);

press

: (Off) will flash on the

display;

required volume (adjustable over 8

levels).

press buttons

press the SET

button briefly

to select (YES) (confirming

activation/deactivation) or (no) (to

abort);

to return to the menu screen or hold

the button down to go back to the

standard screen without saving.

press the SET

button briefly

to return to the menu screen or hold

the button down to go back to the

standard screen without saving.

briefly press the SET

button: a

Setting the clock (Hour);

With this function, it is possible to set

the time.

message confirming the selection will

be displayed and you will return to the

menu screen or, pressing the button for

longer, you will return to the standard

screen without saving.

Setting the distance unit (Unit)

This function is used to set the unit of

measurement.

To adjust, proceed as follows:

press the SET

button briefly:

To adjust, proceed as follows:

"hours" starts flashing on the display;

press the SET

button briefly: the

press the

make the adjustment;

briefly press the SET

button to

button:

display will show the wording (Unit) and

the previously set unit (km) or (mi);

press

required unit.

press the SET

to select the

button briefly

"minutes" starts flashing on the display;

press the

p button to

make the adjustment;

to return to the menu screen or hold

the button down to go back to the

standard screen without saving.

press the SET

button briefly

to return to the menu screen or hold

Knowing the Instrument Panel -> Digital Display for Your Fiat Fiorino SUV Third Generation (2015-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals