9) Once you have released the adjustment
lever, always check that the seat is locked
on the guides by trying to move it back and
forth. Failure to lock the seat in place
could result in the seat moving suddenly
and the driver losing control of the car.
FRONT SEAT ELECTRIC
HEATING
(for versions/markets, where provided)
operate the levers at the sides of the
rear seats fig. 10 pushing them
towards the inside of the vehicle, fold
the backrest and then bring the
backrest onto the cushion.
With the ignition key turned to MAR,
press button A or B fig. 9 respectively
to switch the function on.
10) If passengers are seating in the rear
seats, remove all potentially dangerous
objects which may cause injuries in the
event of an accident.
To deactivate the function press the
button again.
WARNING
2) The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric in
a small area, could cause it to break,
thereby damaging the upholstery.
F1D0034
10
Repositioning the backrests
F1D0145
9
Move the seat belts to the side, making
sure that they are correctly extended
and not twisted. Lift up the backrest
folded previously until a click is heard
for the engagement mechanism.
REAR SEATS
Extending the boot
3) Before tilting the backrest, remove any
objects on the seat cushion.
3)
Proceed as follows:
remove the rear shelf;
WARNING
move the seat belts to the side,
making sure that they are correctly
extended and not twisted;
7) All adjustments must be made with the
car stationary.
if there is a third rear seat (for
versions/markets, where provided),
release the central belt, winding the
buckle into its housing on the roof
panel;
8) If there is a side bag, it is dangerous to
use seat covers other than those available
from the MOPAR® Accessory Line.
13
English 
