AUTOCLOSE (for versions/markets,
where provided)
a confirmation request message will
appear on the display;
“Trip A” can be used to display the
values relating to: "Outside temperature
(for versions/markets, where provided)",
"Range", "Travel Distance", "Average
Fuel consumption", "Current fuel
consumption", "Average speed", "Travel
time (driving time)"
MEASUREMENT UNIT
LANGUAGE
by pressing the
or
buttons, select "Yes" (to confirm
activation/deactivation) or "No" (to
cancel);
BUZZER VOLUME
SEAT BELT BUZZER (for versions/
markets, where provided)
press the button briefly; a
“Trip B” may be used to display the
figures relating to: "Travel Distance B",
"Average fuel consumption B",
"Average speed B", "Travel time B
(driving time)". The “Trip B” function
may be excluded.
message confirming the selection is
displayed and you return to the menu
screen. Hold down the button to return
to the standard screen without storing.
SERVICE
AIRBAG/PASSENGER BAG (for
versions/markets, where provided)
DAYTIME LIGHTS (for
versions/markets, where provided)
Oil level reset
(for versions/markets, where provided)
Both functions can be reset (reset
means start of a new journey).
To reset, hold the TRIP button on the
right steering wheel stalk pressed.
NOTE “Range” and “Current fuel
consumption" parameters cannot be
reset.
RESET TYRE (for versions/markets,
where provided)
24)
This function resets the oil top-up
warning that occurs approximately
every 8,000 km.
CITY BRAKE C. (for versions/
markets, where provided)
OIL LEVEL RESET (for versions/
markets, where provided)
Proceed as follows to reset this warning
after topping up the oil:
EXIT MENU
Press button briefly. The display
will ask you to confirm the reset.
Deactivating the passenger front
airbag and side bag
WARNING
Press the
or
button and
select “YES” to reset the warning or
“NO” to cancel the operation.
This function is used to activate/
deactivate the front passenger airbag.
Proceed as follows:
24) Failure to top up the engine oil could
result in a low level, which could prevent
normal car operation and even cause it to
stop
TRIP COMPUTER
press the button and, after the
display shows the message "Passenger
Bag: Off to deactivate) or the message
("Passenger Bag: On" to activate) by
The Trip computer is used to display
information on car operation when the
key is turned to MAR. Two separate
trips, called “Trip A” and “Trip B”, are
provided to monitor the entire mission
(journey) in a reciprocally independent
manner.
pressing
again;
and
, press once
38
English 
