2013-2023 Fiat Panda SUV SERVICING AND CARE -> BATTERY RECHARGING User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

SERVICING AND CARE -> BATTERY RECHARGING for Your Fiat Panda SUV Third Generation (2013-2023)

Thousands of miles  
Thousands of kilometres  
Years  
9
15  
1
18  
30  
2
27  
45  
3
36  
60  
4
45  
75  
5
54  
90  
6
63  
105 120 135 150  
10  
72  
81  
90  
7
8
9
Visually inspect conditions of: exterior bodywork,  
underbody protection, pipes and hoses (exhaust, fuel  
system, brakes), rubber elements (gaiters, sleeves,  
bushes, etc.)  
Check windscreen/rear window wiper blade position/wear  
Check operation of the windscreen wiper/washer system  
and adjust jets, if necessary  
Check cleanliness of bonnet and luggage compartment  
locks, cleanliness and lubrication of linkage  
Check handbrake lever travel and adjust, if necessary  
Check and adjust clutch pedal travel (0.9 TwinAir 60CV/  
65HP and 1.2 8V 69 HP versions only)  
Visually inspect conditions and wear of front disc brake  
pads and integrity of pad wear indicator  
Visually inspect condition and wear of rear disc brake pads  
and integrity of pad wear indicator (Panda Cross 4x4 and  
Panda 4x4 versions only)  
Visually check condition and wear of rear drum brake  
linings (Panda Cross 4x4 and Panda 4x4 versions  
excluded)  
128  
Thousands of miles  
Thousands of kilometres  
Years  
9
15  
1
18  
30  
2
27  
45  
3
36  
60  
4
45  
75  
5
54  
90  
6
63  
105 120 135 150  
10  
72  
81  
90  
7
8
9
Visually check conditions of accessory drive belt and  
control and (for versions without automatic tensioner)  
check tension  
Visually inspect conditions of toothed timing drive belt (all  
0.9 TwinAir versions excluded)  
Check tappet clearance and adjust if necessary (1.2 8V 69  
HP versions)  
Check and, if necessary, top-up the Dualogic gearbox oil  
level (2)  
Check manual gearbox with drive transmission idler unit  
(PTU) oil level (Panda Cross 4x4 and Panda 4x4 versions  
only)  
Check rear differential oil level (Panda Cross 4x4 and  
Panda 4x4 versions only)  
Visually inspect condition of: LPG pipes and connectors,  
LPG tank fixing (LPG versions only)  
Check fuel system operation and parameters using the  
diagnosis socket (LPG versions only)  
(2) Check to be carried out every year for cars on the road in countries with particularly severe climates (cold countries).  
129  
Thousands of miles  
Thousands of kilometres  
Years  
9
15  
1
18  
30  
2
27  
45  
3
36  
60  
4
45  
75  
5
54  
90  
6
63  
105 120 135 150  
10  
72  
81  
90  
7
8
9
Visually inspect condition of: methane pipes and  
connectors and methane cylinder fastening, restore if  
necessary (Natural Power versions only) (3)  
Check pressure regulator and replace internal filter, if  
necessary (Natural Power versions only) (3)  
Check fuel system operation and parameters using self-  
diagnosis socket (Natural Power versions only)  
Check torque tightening of cylinder fastening bands  
(Natural Power versions only)  
Check pressure regulator heating pipes sealing (Natural  
Power versions only)  
Check correct fitting of injectors (positioning, clip retention)  
(Natural Power versions only)  
Change engine oil and replace oil filter (4) (O) (●)  
(3) Or every year.  
(4) If the car is used mainly on urban routes or the annual distance travelled is less than 10,000 km, the engine oil and engine oil filter must be changed every year.  
(O) Recommended operations.  
(●) Obligatory operations.  
130  
Thousands of miles  
Thousands of kilometres  
Years  
9
15  
1
18  
30  
2
27  
45  
3
36  
60  
4
45  
75  
5
54  
90  
6
63  
105 120 135 150  
10  
72  
81  
90  
7
8
9
Replace spark plugs (1.2 8V 69 HP and 0.9 TwinAir Turbo  
80 HP/85 HP versions) (5)  
Replace spark plugs (0.9 TwinAir 60 HP/65 HP) (5)  
Replace accessory drive belt/s  
(6)  
(6)  
Replace toothed timing drive belt (all 0.9 TwinAir versions  
excluded)  
Replace air cleaner cartridge (7)  
(5) For 0.9 TwinAir versions, to guarantee correct operation and prevent serious damage to the engine, it is essential to proceed as follows: only use spark plugs  
specifically certified for these engines; all spark plugs should be of the same type and brand (see the "Engine" paragraph in the "Technical specifications"  
chapter); strictly comply with the spark plugs replacement intervals in the Service Schedule. It is advisable to contact a FIAT Dealership for plug replacement.  
(6) Areas that are not dusty: recommended maximum mileage 120,000 km. The belt must be replaced every 6 years, regardless of distance travelled. Dusty areas  
and/or demanding use of the vehicle (cold climates, town use, long periods of idling): advised maximum mileage 60,000 km. Regardless of the mileage, the belt  
must be replaced every 4 years.  
(7) If the vehicle is used in dusty areas, this cleaner must be replaced every 15,000 km.  
131  
Thousands of miles  
Thousands of kilometres  
Years  
9
15  
1
18  
30  
2
27  
45  
3
36  
60  
4
45  
75  
5
54  
90  
6
63  
105 120 135 150  
10  
72  
81  
90  
7
8
9
(8)  
Change the brake fluid  
Replace filter inside the pressure regulator (LPG versions  
only)  
Replace paper filter (LPG in gaseous state) (LPG versions  
only)  
Replace the passenger compartment cleaner (7) (O) (●)  
(8) The brake fluid replacement has to be done every two years, irrespective of the mileage.  
(7) If the vehicle is used in dusty areas, this cleaner must be replaced every 15,000 km.  
(O) Recommended operations.  
(●) Obligatory operations.  
132  
DIESEL VERSIONS  
WARNING: Once you have carried out the last intervention in the table, continue with the scheduled servicing, maintaining the  
frequency indicated in the plan by marking each operation with a dot or dedicated note.  
Warning: simply restarting the maintenance from the start of the plan may cause the allowed interval to be exceeded for some  
operations!  
Thousands of miles  
Thousands of kilometres  
Years  
12  
20  
1
24  
40  
2
36  
60  
3
48  
80  
4
60  
100 120 140 160 180 200  
10  
72  
84  
96  
108 120  
5
6
7
8
9
Check tyre condition/wear and adjust pressure, if  
necessary; check the expiry date of the “Fix&Go” repair kit  
(for versions/markets, where provided)  
Check operation of lighting system (headlights, direction  
indicators, hazard warning lights, boot, passenger  
compartment, glove compartment, instrument panel  
warning lights, etc.)  
Check and, if necessary, top up fluid levels (1)  
Check exhaust emissions/smokiness  
Use the diagnosis socket to check supply/engine  
management systems operation, emissions and, for  
versions/markets, where provided, engine oil degradation  
(1) Always only use the liquids shown in the handbook for topping up after having checked that the system is not damaged.  
133  
Thousands of miles  
Thousands of kilometres  
Years  
12  
20  
1
24  
40  
2
36  
60  
3
48  
80  
4
60  
100 120 140 160 180 200  
10  
72  
84  
96  
108 120  
5
6
7
8
9
Visually inspect conditions of: exterior bodywork,  
underbody protection, pipes and hoses (exhaust, fuel  
system, brakes), rubber elements (gaiters, sleeves,  
bushes, etc.)  
Check windscreen/rear window wiper blade position/wear  
Check operation of the windscreen wiper/washer system  
and adjust jets, if necessary  
Check cleanliness of bonnet and luggage compartment  
locks, cleanliness and lubrication of linkage  
Check handbrake lever travel and adjust, if necessary  
Visually inspect conditions and wear of front disc brake  
pads and integrity of pad wear indicator  
Visually inspect condition and wear of rear disc brake pads  
and integrity of pad wear indicator (Panda Cross 4x4 and  
Panda 4x4 versions only)  
Visually check condition and wear of rear drum brake  
linings (Panda Cross 4x4 and Panda 4x4 versions  
excluded)  
Visually inspect condition of the accessory drive belt(s)  
134  
Thousands of miles  
Thousands of kilometres  
Years  
12  
20  
1
24  
40  
2
36  
60  
3
48  
80  
4
60  
100 120 140 160 180 200  
10  
72  
84  
96  
108 120  
5
6
7
8
9
Check drive transmission idler unit (PTU) oil level (Panda  
Cross and 4x4 Panda 4x4 versions only)  
Check rear differential oil level (Panda Cross 4x4 and  
Panda 4x4 versions only)  
(2)  
(3)  
Change engine oil and replace oil filter  
Replace accessory drive belt/s  
Replace fuel filter cartridge (4)  
Replace air cleaner cartridge (5)  
(2) The actual interval for changing engine oil and replacing the engine oil filter depends on the car usage conditions and is signalled by the warning light or  
message in the instrument panel. In any case, it must never exceed 2 years. Where the car is used mostly in urban settings you need to replace the engine oil  
filter every year.  
(3) Areas that are not dusty: recommended maximum mileage 120,000 km. The belt must be replaced every 6 years, regardless of distance travelled. Dusty areas  
and/or demanding use of the vehicle (cold climates, town use, long periods of idling): advised maximum mileage 60,000 km. Regardless of the mileage, the belt  
must be replaced every 4 years.  
(4) If the car runs on fuel with quality below the relevant European specification, this filter should be replaced every 20,000 km.  
(5) If the vehicle is used in dusty areas, this cleaner must be replaced every 20,000 km.  
135  
Thousands of miles  
Thousands of kilometres  
Years  
12  
20  
1
24  
40  
2
36  
60  
3
48  
80  
4
60  
100 120 140 160 180 200  
10  
72  
84  
96  
108 120  
5
6
7
8
9
(6)  
Change the brake fluid  
Replace the passenger compartment cleaner (5) (O) (●)  
(6) The brake fluid replacement has to be done every two years, irrespective of the mileage.  
(5) If the vehicle is used in dusty areas, this cleaner must be replaced every 20,000 km.  
(O) Recommended operations.  
(●) Obligatory operations.  
136  
NOTE The battery recharging  
procedure is given as information only.  
You are advised to contact a Fiat  
Dealership to have this operation  
carried out.  
turn on the battery charger. At the  
end of the charging process, switch the  
battery charger off;  
BATTERY  
RECHARGING  
157) 158)  
after having disconnected the  
charging device, reconnect the  
connector A to the sensor C.  
NOTE After turning the ignition key to  
STOP and having closed the driver's  
side door, wait at least one minute  
before disconnecting and then  
reconnecting the electrical supply to the  
battery.  
VERSIONS WITHOUT  
START&STOP SYSTEM  
(for versions/markets, where provided)  
To recharge, proceed as follows:  
disconnect the terminal from the  
negative battery pole;  
IMPORTANT Charging should be slow  
at a low ampere rating for  
connect the charger cables to the  
battery terminals, observing the polarity;  
approximately 24 hours. Charging for a  
longer time may damage the battery.  
turn on the battery charger;  
when it is recharged, turn the  
charger off before disconnecting it from  
the battery;  
IMPORTANT The cables of the  
electrical system must be correctly  
reconnected to the battery, i.e. the  
positive cable (+) to the positive  
reconnect the terminal to the  
negative battery pole.  
terminal and the negative cable (–) to  
the negative terminal. The battery  
terminals are marked with the positive  
(+) and negative (–) symbols, and are  
shown on the battery cover. The battery  
terminals must also be corrosion-free.  
VERSIONS WITH  
START&STOP SYSTEM  
(for versions/markets, where provided)  
To recharge, proceed as follows:  
disconnect the connector A fig. 128  
(pressing the button B) from the sensor  
C monitoring the battery conditions,  
on the negative pole D of the battery;  
F1D0136  
128  
IMPORTANT If a "quick-type" battery  
charger is used with the battery fitted  
on the vehicle, before connecting it  
disconnect both cables of the battery  
itself. Do not use a "quick-type" battery  
charger to provide the starting voltage.  
connect the positive cable of the  
battery charger to the positive battery  
pole E and the negative cable to the  
terminal of sensor D;  
137  
WARNING  
157) Battery fluid is poisonous and  
corrosive: avoid contact with your skin and  
eyes. The battery should be charged in a  
well ventilated place, away from naked  
flames or possible sources of sparks:  
danger of explosion and fire.  
158) Do not attempt to recharge a frozen  
battery: first it must be thawed, otherwise  
there is a risk of explosion. If freezing  
has occurred, the battery should be  
checked by skilled personnel to make sure  
that the internal elements are not damaged  
and that the body is not cracked, with the  
risk of leaking poisonous and corrosive  
acid.  
138  
ENGINE COMPARTMENT  
.
CHECKING LEVELS  
159) 160)  
58)  
0.9 TwinAir/0.9 TwinAir Turbo versions  
F1D0097  
129  
A. Engine oil plug/filler – B. Engine oil dipstick – C. Engine coolant fluid – D. Windscreen/rear window washer fluid – E. Brake fluid – F. Battery  
139  
1.2 8V 69 HP versions  
F1D0098  
130  
A. Engine oil plug/filler – B. Engine oil dipstick – C. Engine coolant fluid – D. Windscreen/rear window washer fluid – E. Brake fluid – F. Battery  
140  
1.3 16V MultiJet versions  
F1D0141  
131  
A. Engine oil plug/filler – B. Engine oil dipstick – C. Engine coolant fluid – D. Windscreen/rear window washer fluid – E. Brake fluid – F. Battery  
141  
ENGINE OIL  
Topping up the engine oil (for  
TwinAir engines)  
BRAKE FLUID  
59) 60)  
3)  
163) 164)  
62)  
If the message requesting an engine oil  
top-up appears on the display, the  
user must top up the oil to the MAX  
level and then reset the warning from  
the instrument panel as described  
in the "Display" paragraph in the  
"Knowing the instrument panel"  
chapter.  
Check the oil level a few minutes (about  
5) after the engine has stopped, with  
the vehicle parked on level ground.  
Check that the oil level is between the  
MIN and MAX references on the  
Check that the fluid is at the maximum  
level (the fluid level in the reservoir  
must not exceed the MAX mark). If the  
fluid level in the reservoir is too low,  
undo reservoir cap E and add the fluid  
described in the "Technical  
dipstick B. If the oil level is near or even  
under the MIN mark, add oil using the  
filler A to reach the MAX mark.  
Specifications" chapter.  
DUALOGIC GEARBOX  
HYDRAULIC ACTIVATION  
SYSTEM OIL  
NOTE For 0.9 TwinAir and 0.9 TwinAir  
Turbo versions, the engine oil level  
dipstick B is integral with the cap A.  
Loosen the plug, clean the dipstick with  
a cloth that does not leave traces,  
reinsert the dipstick and re-tighten the  
plug. Unscrew the cap again and check  
that the engine oil level is between the  
MIN and MAX marks on the dipstick.  
NOTE After adding or changing the oil,  
let the engine turn over for a few  
4)  
seconds and wait a few minutes after  
turning it off before you check the level.  
The fluid level should only be checked  
at a Fiat Dealership.  
ENGINE COOLANT FLUID  
BATTERY  
161)  
61)  
165) 166) 167) 168)  
The coolant level must be checked  
when the engine is cold and must  
range between the MIN and MAX  
marks on the reservoir.  
63)  
5)  
Engine oil consumption  
The maximum engine oil consumption  
is usually 400 grams every 1000 km.  
During the initial period of use the  
engine oil consumption conditions  
should be considered as having  
stabilised after the first 5000 - 6000  
km.  
Battery F does not require topping up  
the electrolyte with distilled water. A  
periodic check carried out at a Fiat  
Dealership is, however, necessary to  
check efficiency.  
If the level is too low, unscrew reservoir  
cap C and add the fluid described in  
the "Technical Specifications" section.  
WINDSCREEN/REAR  
WINDOW WASHING FLUID  
162)  
If the level is too low, raise reservoir cap  
D (see previous pages) and add the  
fluid described in the chapter "Technical  
Specifications".  
142  
161) The cooling system is pressurised. If  
necessary, only replace the plug with  
another original or the operation of the  
system may be adversely affected. Do not  
remove the reservoir plug when the engine  
is hot: you risk scalding yourself.  
168) Always wear appropriate goggles  
when working on or near the battery.  
IMPORTANT After the battery is  
disconnected, the steering must be  
initialised. The  
warning light on the  
instrument panel switches on to  
indicate this. To carry out this  
procedure turn the steering wheel all  
the way from one end to the other  
or drive in a straight line for about a  
hundred metres.  
WARNING  
162) Do not travel with the windscreen  
washer fluid reservoir empty: the  
windscreen washer is essential for  
improving visibility. Some commercial  
windscreen washer additives are  
flammable. The engine compartment  
contains hot components which may set it  
on fire.  
58) Be careful not to confuse the various  
types of fluids while topping up: they  
are not compatible with each other!  
Topping up with an unsuitable fluid could  
severely damage your car.  
IMPORTANT If the charge level remains  
under 50% for a long time, the battery  
is damaged by sulphation, reducing  
its capacity and efficiency at start-up.  
59) The oil level must never exceed the  
MAX reference.  
163) Brake fluid is poisonous and highly  
corrosive. In the event of accidental  
contact, immediately wash the affected  
parts with water and mild soap. Then rinse  
thoroughly. Call a doctor immediately if  
swallowed.  
60) Do not add oil with specifications other  
than those of the oil already existing in  
the engine.  
CLIMATE CONTROL  
SYSTEM MAINTENANCE  
61) PARAFLU UP antifreeze is used in the  
engine cooling system. Use the same fluid  
as in the cooling system when topping  
up. PARAFLU UP fluid cannot be mixed  
with any other type of fluid. If this occurs,  
do not start the engine and contact your  
Fiat Dealership immediately.  
In winter, the climate control system  
must be turned on at least once a  
month for about 10 minutes. Before  
summer, have the system checked at a  
Fiat Dealership.  
164) The symbol , on the brake fluid  
container indicates if a brake fluid is  
synthetic or mineral-based. Use of mineral  
type fluids will damage the special rubber  
seals of the braking system beyond repair.  
62) Prevent brake fluid, which is highly  
corrosive, from coming into contact with  
painted parts. Should it happen,  
immediately wash with water.  
165) Battery fluid is poisonous and  
corrosive. Avoid contact with the skin and  
eyes. Keep naked flames and sources  
of sparks away from the battery: risk of  
explosion and fire.  
WARNING  
63) Incorrect installation of electric and  
electronic devices may cause severe  
damage to your car. After purchasing your  
vehicle, if you wish to install any  
accessories (anti-theft, phone, etc.),  
contact a Fiat Dealership, which  
will suggest the most appropriate devices  
for your vehicle, and will, most importantly,  
advise you if a higher capacity battery  
needs to be installed.  
159) Never smoke while working in the  
engine compartment: gas and inflammable  
vapours may be present, with the risk of  
fire.  
166) Using the battery with insufficient  
fluid irreparably damages the battery and  
may cause an explosion.  
167) If the car will be unused for an  
extended period of time in extremely cold  
weather conditions, remove the battery  
and store it in a heated area to prevent it  
from freezing.  
160) Be very careful when working in the  
engine compartment when the engine  
is hot: you may get burned.  
143  
BRAKES  
WINDSCREEN /  
REAR WINDOW  
WIPERS  
WARNING  
Depending on the version/market, the  
vehicle may be equipped with  
mechanical wear detectors for the  
brake pads: one for each wheel  
assembly.  
3) Used engine oil and oil filters contain  
substances which are harmful to the  
environment. To change the oil and filters,  
we advise you to contact a Fiat Dealership.  
169)  
64)  
When the brake linings are close to  
wearing out, pressing the brake pedal  
will generate a slight squeal: this lasts  
for about 100 km (the mileage varies  
with the driving style and route).  
In this case, it is still possible to  
continue driving, with caution.  
However, contact a Fiat Dealership as  
soon as possible to have the worn  
brake pads changed.  
4) Used transmission fluid contains  
substances that are harmful to the  
environment. It is advisable to have the oil  
changed by a Fiat Dealership where it  
will be disposed of respecting the  
environment and according to legal  
requirements.  
REPLACING THE  
WINDSCREEN WIPER  
BLADES  
raise the wiper arm, press tab A fig.  
132 of the attachment spring and  
remove the blade from the arm;  
fit the new blade, inserting the tab  
into the special slot in the arm, making  
sure that it is locked;  
5) Batteries contain substances which are  
very dangerous for the environment. For  
battery replacement, contact a Fiat  
Dealership.  
lower the wiper arm onto the  
windscreen.  
F1D0100  
132  
144  
REPLACING THE REAR  
WINDOW WIPER BLADE  
Rear window washer  
LIFTING THE  
VEHICLE  
The rear window washer jets are fixed.  
The nozzle holder is located above  
the rear window.  
Proceed as follows:  
170)  
raise the cover A fig. 133, undo the  
nut B and remove the arm C;  
If the vehicle needs to be raised, go to  
a Fiat Dealership which is equipped  
with arm lifts and workshop lifts fig.  
134.  
correctly position the new arm, fully  
tighten the nut B then lower the cover  
A.  
WARNING  
169) Driving with worn windscreen/rear  
window wiper blades is a serious risk,  
because visibility is reduced in bad  
weather.  
WARNING  
64) Do not operate the windscreen wiper  
with the blades lifted from the windscreen.  
F1D0135  
134  
F1D0101  
133  
NOZZLES  
WARNING  
Windscreen washer  
The windscreen washer jets can be  
adjusted rotating the side notch with a  
screwdriver. If there is no jet of fluid,  
firstly check that there is fluid in the  
reservoir (see the "Checking fluid levels"  
paragraph in this chapter). Then check  
that the nozzle holes are not clogged;  
use a needle to unblock them if  
necessary.  
170) Lift the vehicle exclusively by  
positioning the jack arms or the workshop  
jack in the points illustrated.  
145  
WHEELS AND TYRES  
BODYWORK  
WARNING  
PRESERVING THE  
BODYWORK  
171) 172)  
171) Do not cross switch the tyres if they  
are "unidirectional" type. In this case,  
always take care not to fit the tyres with a  
direction of rotation that is opposite to that  
indicated: you would risk losing grip and  
control of the vehicle.  
65) 66) 67) 68)  
Paintwork  
69)  
SUGGESTIONS ABOUT  
THE ROTATION OF THE  
TYRES  
6)  
172) Travelling with partially or completely  
deflated tyres can cause safety problems  
and irremediably damage the tyre.  
To wash the car correctly, proceed as  
follows:  
The front and rear tyres are subject to  
different loads and stress due to  
steering, manoeuvres and braking. For  
this reason they are subject to uneven  
wear.  
remove the aerial from the roof to  
prevent damage to it if the car is  
washed in an automatic system;  
WARNING  
if high pressure jets or cleaners are  
used to wash the vehicle, keep a  
distance of at least 40 cm from the  
bodywork to avoid damage or  
65) The road holding qualities of the car  
also depend on the correct inflation  
pressure of the tyres.  
To resolve this problem, tyres should be  
rotated at the appropriate time. This  
operation is recommended for tyres  
with a deep tread pattern, suitable both  
for on-road and off-road driving.  
Tyre rotation contributes to the  
66) If tyre pressure is too low, the tyre may  
overheat and be severely damaged as a  
result.  
alteration. It should be remembered  
that the build up of water can damage  
the car over a period of time;  
67) Do not switch tyres from the right-hand  
side of the vehicle to the left-hand side,  
and vice versa.  
preservation of the grip and traction  
performance on wet, muddy or snowy  
roads, guaranteeing optimal driveability  
of the car.  
wash the bodywork using a low  
pressure jet of water;  
68) Never submit alloy rims to repainting  
treatments requiring the use of  
temperatures exceeding 150°C. The  
mechanical properties of the wheels could  
be impaired.  
wipe a sponge with a slightly soapy  
solution over the bodywork, frequently  
rinsing the sponge;  
In the case of irregular wear of the  
tyres, the reason must be identified and  
corrected before rotating them.  
rinse well with water and dry with a  
jet of air or a chamois leather.  
146  
Dry the less visible parts (e.g. door  
frames, bonnet, headlight frames etc.)  
with special care, as water may  
stagnate more easily in these areas.  
The car should not be taken to a closed  
area immediately, but left outside so  
that residual water can evaporate.  
Do not wash the car after it has been  
left in the sun or with the bonnet hot:  
this may alter the shine of the  
paintwork.  
INTERIOR  
WARNING  
173) 174)  
6) Detergents pollute the environment.  
Only wash your vehicle in areas equipped  
to collect and treat wastewater from this  
type of activity.  
SEATS AND FABRIC  
PARTS  
Remove dust with a soft brush or a  
vacuum cleaner.  
Rub the seats with a sponge moistened  
with a solution of water and neutral  
detergent.  
Exterior plastic parts must be cleaned  
in the same way as the rest of the  
vehicle.  
WARNING To avoid ruining the  
upholstery, do not use acetone, acetic  
alcohol, denatured ethyl alcohol or  
any highly aggressive solvents or  
detergents to clean the fabric parts.  
Use spotting agents such as isopropyl  
alcohol or dry stain removers.  
Avoid parking under trees; the resin  
dropped by trees makes the paintwork  
go opaque and increases the possibility  
of corrosion.  
IMPORTANT Bird droppings should be  
washed off immediately and thoroughly  
as the acid they contain is particularly  
aggressive.  
WARNING  
173) Never use flammable products, such  
as petrol ether or rectified petrol to clean  
the inside of the car. The electrostatic  
charges which are generated by rubbing  
during the cleaning operation may cause a  
fire.  
WARNING  
69) In order to preserve the aesthetic  
appearance of the paint abrasive products  
and/or polishes should not be used for  
cleaning the vehicle.  
174) Do not keep aerosol cans in the  
vehicle: they might explode. Aerosol cans  
must not be exposed to a temperature  
exceeding 50°C. When the vehicle is  
exposed to sunlight, the internal  
temperature can greatly exceed this value.  
147  
TECHNICAL DATA  
IDENTIFICATION DATA....................149  
ENGINE ..........................................150  
WHEELS.........................................154  
DIMENSIONS..................................163  
WEIGHTS........................................166  
REFUELLING ..................................173  
FLUIDS AND LUBRICANTS ............175  
PERFORMANCE.............................178  
FUEL CONSUMPTION....................179  
CO2 EMISSIONS ...........................181  
Everything you may find useful for  
understanding how your car is made  
and works is contained in this chapter  
and illustrated with data, tables and  
graphics. For the enthusiasts and the  
technician, but also just for those who  
want to know every detail of their  
car.  
PRESCRIPTIONS FOR HANDLING  
THE VEHICLE AT THE END OF ITS  
LIFE ................................................183  
148  
H
Maximum permitted weight on  
second axle (rear).  
CHASSIS MARKING  
IDENTIFICATION  
DATA  
This is located on the right side of the  
boot rear floor and gives the following  
identification data:  
I
Engine type.  
L
Bodywork version code.  
VEHICLE IDENTIFICATION  
NUMBER (VIN) PLATE  
type of vehicle;  
M
N
Spare part number.  
chassis serial number.  
Correct value of smoke coefficient  
(for diesel engines).  
Depending on the version, the plate fig.  
135 may be located to the right or at  
the centre of the luggage compartment  
(lift the carpet covering to access it). It  
contains the following data:  
ENGINE MARKING  
BODYWORK PAINT  
IDENTIFICATION PLATE  
It is stamped on the cylinder block and  
includes the type and the engine serial  
number.  
This is applied inside the bonnet (left  
side) and bears the following data  
fig. 136:  
A Paint manufacturer.  
B Colour name.  
C Fiat colour code.  
D Respray and touch up code.  
F1D0142  
135  
A
B
C
D
E
Name of Manufacturer  
Type-approval number.  
Vehicle type identification code.  
Chassis serial number.  
F1D0128  
136  
Maximum permitted weight of vehicle  
fully laden.  
F
Maximum permitted weight of vehicle  
fully laden plus trailer.  
G
Maximum permitted weight on first  
axle (front).  
149  
ENGINE  
Versions  
1.2 8V 69 HP  
169A4000  
Otto  
1.2 8V 69 HP LPG  
169A4000  
Otto  
Engine code  
Cycle  
Number and position of cylinders  
Piston bore and stroke (mm)  
Total displacement (cm³)  
Compression ratio  
4 in line  
4 in line  
70.8 × 78.86  
1242  
70.8 × 78.86  
1242  
11.1: 1  
11.1: 1  
LPG  
51  
Petrol  
51  
Maximum power (EC) (kW)  
51  
69  
Maximum power (EEC) (HP)  
corresponding engine speed (rpm)  
Maximum torque (EC) (Nm)  
Maximum torque (EC) (kgm)  
corresponding engine speed (rpm)  
69  
69  
5500  
102  
10.4  
3000  
5500  
102  
10.4  
3000  
5500  
102  
10.4  
3000  
NGK ZKR7A-10 or  
CHAMPION RA8MCX4  
Spark plugs  
Fuel  
NGK ZKR7AI-8  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
LPG for motor vehicles  
(EN589 Specification)  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
150  
0.9 TwinAir Turbo 80 HP  
(*)  
Versions  
0.9 TwinAir 65 HP  
0.9 TwinAir 60 HP (*)  
Engine code  
Cycle  
312A6000  
Otto  
312A4000  
312A5000  
Otto  
Otto  
2 in line  
83.5 × 88  
964  
Number and position of cylinders  
Piston bore and stroke (mm)  
Total displacement (cm³)  
Compression ratio  
2 in line  
83.5 × 88  
964  
2 in line  
80.5 × 86  
875  
11.1: 1  
44  
11.1: 1  
48  
10: 1  
Maximum power (EC) (kW)  
Maximum power (EEC) (HP)  
corresponding engine speed (rpm)  
Maximum torque (EC) (Nm)  
Maximum torque (EC) (kgm)  
corresponding engine speed (rpm)  
Spark plugs  
59  
60  
65  
80  
6250  
6250  
5500  
88  
88  
145  
8.9  
8.9  
14.8  
3500  
3500  
1900  
NGK T20182U  
NGK LKR7DI-12  
NGK PLKR9C8  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Fuel  
(*) For versions/markets, where provided  
151  
Versions  
0.9 TwinAir Turbo 85 HP  
0.9 TwinAir Turbo Natural Power  
Engine code  
Cycle  
312A2000  
Otto  
312A2000  
Otto  
Number and position of cylinders  
Piston bore and stroke (mm)  
Total displacement (cm³)  
Compression ratio  
2 in line  
80.5 × 86.0  
875  
2 in line  
80.5 × 86.0  
875  
10: 1  
10: 1  
Methane  
Petrol  
62.5  
85  
Maximum power (EC) (kW)  
Maximum power (EEC) (HP)  
corresponding engine speed (rpm)  
Maximum torque (EC) (Nm)  
Maximum torque (EC) (kgm)  
corresponding engine speed (rpm)  
Spark plugs  
59  
80  
62.5 / 57 (*)  
85 / 77.5(*)  
5500  
5500  
140  
14.3  
2500  
5500  
145  
145 / 100 (*)  
14.8 / 10.2 (*)  
1900 / 2000 (*)  
NGK ILKR9G8  
14.8  
1900  
NGK ILKR9G8  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Fuel  
Methane for motor vehicles  
(*) With ECO button pressed  
152  
0.9 TwinAir Turbo 90 HP  
(*)  
Versions  
1.3 16V Multijet 95 HP  
1.3 16V MultiJet 80 HP  
Engine code  
Cycle  
312A7000  
Otto  
312B1000 / 330A1000(°)  
312B2000 / 225A2000 (°°)  
Diesel  
4 in line  
69.6 × 82  
1248  
16.8: 1  
70  
Diesel  
4 in line  
69.6 × 82  
1248  
16.8: 1  
59  
Number and position of cylinders  
Piston bore and stroke (mm)  
Total displacement (cm³)  
Compression ratio  
2 in line  
80.5 × 86.0  
875  
10: 1  
Maximum power (EC) (kW)  
Maximum power (EEC) (HP)  
corresponding engine speed (rpm)  
Maximum torque (EC) (Nm)  
Maximum torque (EC) (kgm)  
corresponding engine speed (rpm)  
Spark plugs  
66.2 / 57 (**)  
90 / 77.5 (**)  
5500  
95  
80  
3750  
200  
3750  
200  
145 / 100 (**)  
14.8 / 10.2 (**)  
1900 / 2000 (**)  
NGK ILKR9G8  
20.4  
20.4  
1500  
-
1500  
-
Unleaded petrol 95 R.O.N.  
(EN 228 specifications)  
Diesel for motor vehicles  
(EN590 Specification)  
Diesel for motor vehicles  
(EN590 Specification)  
Fuel  
(°) 4x4 and Cross Versions  
(°°) 4x4 versions  
(*) For versions/markets, where provided  
(**) With ECO button pressed  
153  
SNOW CHAINS  
WHEELS  
178) 179) 180)  
70)  
Important notes  
175) 176) 177)  
The use of snow chains should be in  
compliance with local regulations of  
each country. In certain countries, tyres  
marked with code M+S (Mud and  
Snow) are considered as winter  
equipment; therefore their use is  
equivalent to that of the snow chains.  
The snow chains may be applied only  
to the front wheel tyres.  
Alloy or pressed steel rims. Tubeless  
radial carcass tyres.  
All approved tyres are listed in the  
Registration Document.  
IMPORTANT If there are any  
discrepancies between the Owner  
Handbook and the Registration  
Document, take the information from  
the latter. For safe driving, the car must  
be fitted with tyres of the same make  
and type on all wheels.  
Check the tension of the snow chains  
after the first few metres have been  
driven.  
IMPORTANT Do not use inner tubes  
with Tubeless tyres.  
Using snow chains with tyres with  
non-original dimensions may damage  
the vehicle.  
The M+S tyres provided with the  
vehicle (on versions where provided) are  
characterised by the 3PMSF (3 Peak  
Using different size or type (M+S, etc.)  
tyres between front and rear axle may  
adversely affect car driveability, with the  
risk of losing control of the car and  
resulting accidents.  
Mountain Snow Flake) marking  
.
This marking certifies that the tyre has  
passed the specific approval test  
required by European Community  
Regulation ECE 117, which ensures  
better performance on snow than  
a "simple" M+S.  
Snow chains cannot be fitted to the  
space-saver wheel (for versions/  
markets, where provided). If a front tyre  
is punctured, replace a rear wheel  
with the space-saver wheel and move  
the rear wheel to the front axle. In  
this way, with two normal drive wheels  
at the front, snow chains can be fitted.  
154  
RIMS AND TYRES PROVIDED  
Panda versions  
Space-saver spare  
wheel (*)  
Versions  
Wheels  
Tyres fitted  
Winter tyres  
5.5J x 14H2 - ET35  
5.5J x 14H2 - ET35  
175/65 R14 82Q (M+S)  
175/65 R14 82Q (M+S)  
135/80 R14 84M  
135/80 R14 84M  
0.9 TwinAir 60 HP (*)  
175/65 R14 82T (**)  
175/65 R14 82T (**)  
175/65 R14 82T  
Goodyear Duragrip (**)  
0.9 TwinAir 65 HP  
5.5J x 14H2 - ET35  
175/65 R14 82Q (M+S)  
135/80 R14 84M  
(***)  
185/55 R15 82Q (M+S)  
175/65 R14 82Q (M+S)  
175/65 R14 82Q (M+S)  
135/80 R14 84M  
135/80 R14 84M  
135/80 R14 84M  
6J x 15H2 - ET35 (****)  
5.5J x 14H2 - ET35  
5.5J x 14H2 - ET35  
185/55 R15 82T (°)  
175/65 R14 82T (**)  
175/65 R14 82T (**)  
0.9 TwinAir 80 HP (*)  
175/65 R14 82T  
Goodyear Duragrip (**)  
0.9 TwinAir Turbo  
85 HP  
5.5J x 14H2 - ET35  
175/65 R14 82Q (M+S)  
185/55 R15 82Q (M+S)  
135/80 R14 84M  
135/80 R14 84M  
(***)  
6J x 15H2 - ET35 (****)  
185/55 R15 82T (°)  
(*) For versions/markets, where provided.  
(**) The tyre can be fitted with size 9 mm snow chains.  
(***) For versions/markets, where provided. Tyres offering equivalent performance can be used as an alternative.  
(****) Alloy wheel rim.  
(°) Not suitable for chains.  
155  
Space-saver spare  
wheel (*)  
Versions  
Wheels  
Tyres fitted  
Winter tyres  
0.9 TwinAir Turbo  
Natural Power  
175/65 R15 84Q (M+S)  
-
6J x 15H2 - ET 35 (****)  
175/65 R15 84T (°°°)  
5.5J x 14H2 - ET35  
5.5J x 14H2 - ET35  
5.5J x 14H2 - ET35  
175/65 R14 79Q (M+S)  
175/65 R14 81Q (M+S)  
175/65 R14 82Q (M+S)  
185/55 R15 82Q (M+S)  
175/65 R14 84Q (M+S)  
185/55 R15 82Q (M+S)  
195/45 R16 84Q (M+S)  
175/65 R14 82Q (M+S)  
185/55 R15 82Q (M+S)  
135/80 R14 84M  
135/80 R14 84M  
135/80 R14 84M  
135/80 R14 84M  
165/65 R14 79T (*)  
165/70 R14 81T (*)  
175/65 R14 82T (**)  
185/55 R15 82T (°)  
175/65 R14 82T  
1.2 8V 69 HP  
6J x 15H2 - ET35 (****)  
5.5J x 14H2 - ET35  
6J x 15H2 - ET35  
135/80 R14 84P  
135/80 R14 80P  
reinforced  
1.2 8V 69 HP S&S  
1.3 16V MultiJet  
185/55 R15 82T  
135/80 R14 84M  
6.5J x 16H2 - ET35  
5.5J x 14H2 - ET35  
6J x 15H2 - ET35  
195/45 R16 84T  
135/80 R14 84M  
135/80 R14 84M  
175/65 R14 82T (**)  
185/55 R15 82H  
(*) For versions/markets, where provided.  
(**) The tyre can be fitted with size 9 mm snow chains.  
(****) Alloy wheel rim.  
(°) Not suitable for chains.  
(°°°) Tyre to which chains can be fitted, with reduced size chains: 7 mm.  
156  
Panda 4x4 versions  
Space-saver spare  
wheel (*)  
Versions  
Wheels  
Tyres fitted  
Winter tyres  
5.5J x 14H2 - ET35  
5.5J x 14H2 - ET35  
175/65 R14 84Q (M+S)  
135/80 R14 84M  
175/65 R14 82T (**)  
175/65 R14 82T  
Goodyear Duragrip (**)  
175/65 R14 84Q (M+S)  
135/80 R14 84M  
0.9 TwinAir Turbo  
85 HP  
(***)  
6J x 15H2 - ET35  
6J x 15H2 - ET35  
6J x 15H2 - ET35  
6J x 15H2 - ET35  
175/65 R15 84T (M+S)  
175/65 R15 84Q (M+S)  
175/65 R15 84T (M+S)  
175/65 R15 84Q (M+S)  
125/80 R15 95M  
125/80 R15 95M  
125/80 R15 95M  
125/80 R15 95M  
175/65 R15 84T (M+S)(°)  
175/65 R15 84T (°) (°°)  
175/65 R15 84T (M+S)(°)  
175/65 R15 84T (°)  
1.3 16V MultiJet  
(*) For versions/markets, where provided.  
(**) The tyre can be fitted with size 9 mm snow chains.  
(***) For versions/markets, where provided. Tyres offering equivalent performance can be used as an alternative.  
(°) Tyres to which reduced size snow chains can be fitted: 7 mm.  
(°°) Tyres available on request.  
157  
Panda Cross 4x4 versions  
Space-saver spare  
wheel (*)  
Versions  
Wheels  
Tyres fitted  
Winter tyres  
6 J x 15H2 ET35  
6 J x 15H2 ET35  
175/65 R15 84T (M+S)  
175/65 R15 84Q (M+S)  
125/80 R15 95M  
125/80 R15 95M  
175/65 R15 84T (M+S)(**)  
175/65 R15 84T (**)  
0.9 TwinAir Turbo  
90 HP  
185/65 R15 88H  
(M+S)(***)  
6 J x 15H2 ET30  
185/65 R15 88Q (M+S)  
125/80 R15 95M  
6 J x 15H2 ET30  
6 J x 15H2 ET35  
6 J x 15H2 ET35  
185/65 R15 88Q (M+S)  
175/65 R15 84T (M+S)  
175/65 R15 84Q (M+S)  
125/80 R15 95M  
125/80 R15 95M  
125/80 R15 95M  
185/65 R15 88H(***)  
175/65 R15 84T (M+S)(**)  
175/65 R15 84T (**)  
1.3 16V MultiJet  
185/65 R15 88H  
(M+S)(***)  
6 J x 15H2 ET30  
6 J x 15H2 ET30  
185/65 R15 88H (M+S)  
185/65 R15 88Q (M+S)  
125/80 R15 95M  
125/80 R15 95M  
185/65 R15 88H(***)  
(*) For versions/markets, where provided.  
(**) The tyre can be fitted with chains.  
(***) Tyre not suitable for fitting snow chains.  
NOTE For Panda Cross 4x4 and Panda 4x4 versions if the space-saver wheel is used, the control unit for 4x4 drive detects its  
presence (via the wheel speed signals) and reduces the intervention of the four-wheel drive to a minimum, while guaranteeing  
the agility of the vehicle. No fault/alarm signal is displayed on the instrument panel or on the display.  
158  
Panda Cross 4x2 versions  
Space-saver spare  
wheel (*)  
Versions  
Wheels  
Tyres fitted  
Winter tyres  
6 J x 15H2 ET35  
6 J x 15H2 ET30  
6J x 15H2 ET35  
6J x 15H2 ET30  
–
125/80 R15 95M  
125/80 R15 95M  
125/80 R15 95M  
125/80 R15 95M  
175/65 R15 84T (**)  
185/65 R15 88H (M+S)  
175/65 R15 84T (**)  
185/65 R15 88H (M+S)  
1.3 16V Multijet 95 HP  
S&S  
185/65 R15 88H (M+S)  
–
1.2 8V 69 HP S&S  
185/65 R15 88H (M+S)  
(*) For versions/markets, where provided.  
(**) The tyre can be fitted with chains.  
159  
COLD TYRE INFLATION PRESSURE (bar)  
When the tyres are warm, the inflation pressure should be + 0.3 bar in relation to the recommended figure. However, recheck  
that the value is correct with the tyre cold. With winter tyres the pressure should be +0.2 bar compared with the recommended  
figure for the tyres that comes with the vehicle.  
Panda versions  
Unladen/medium load  
Full load  
Space-saver  
Tyres  
spare wheel (*)  
Front  
Rear  
Front  
Rear  
165/65 R14 79T  
2.5  
2.3  
2.2  
2.7  
2.4  
2.8  
2.8  
2.0  
2.5  
2.5  
2.2  
2.5  
165/70 R14 81T (*)  
2.0 / 2.5 (**) /  
2.1 (***)  
175/65 R14 82T  
2.8  
2.2 / 2.5 (**)  
185/55 R15 82T  
185/55 R15 82H  
2.2  
2.2  
2.0  
2.0  
2.5  
2.5  
2.5  
2.5  
2.8  
2.8  
(*) For versions/markets, where provided  
(**) 0.9 TwinAir 60 HP/80 HP engines  
(***)Natural Power versions  
160  
Panda Cross 4x2 / Panda Cross 4x4 / Panda 4x4 versions  
Unladen/medium load  
Full load  
Space-saver  
Tyres  
spare wheel (°)  
Front  
Rear  
Front  
Rear  
175/65 R14 82T M+S  
(*)  
2.2  
2.1  
2.5  
2.5  
4.2  
2.2  
2.4  
2.4  
2.1  
2.2  
2.2  
2.5  
2.7  
2.7  
2.5  
2.7  
2.7  
4.2  
4.2  
4.2  
175/65 R15 84T (*)  
175/65 R15 84T (**)  
185/65 R15 88H (**)  
(°) For versions/markets, where provided.  
(*) For Panda 4x4 versions  
(**) For Panda Cross versions  
NOTE For Panda Cross 4x4 and Panda 4x4 versions, do not drive deliberately for long distances with the tyres flat (not at the  
prescribed pressure) and/or with greatly varying pressures between front axle and rear axle, in order to avoid any malfunction of  
the 4x4 drive.  
.
WARNING  
175) The top speed for winter tyres marked “Q” is 160 km/h, while it is 190 km/h for “T” tyres and 210 km/h for "H" tyres. The highway code  
speed limits must however always be complied with.  
176) 185/55 R15 82T tyres cannot be fitted with chains.  
177) 175/65 R14 82T tyres can be fitted with reduced size snow chains: 9 mm.  
178) 175/65 R15 84T tyres can be fitted with reduced size snow chains: 7 mm.  
179) Keep the vehicle's speed down when snow chains are fitted; never exceed 50 km/h. Avoid potholes, do not drive over steps or  
pavements and do not drive long distances over roads without snow, to avoid damaging both your vehicle and the road surface.  
180) DO NOT fit wheel hub caps when using integral hub caps fixed (with springs) to the steel rim and after sale tyres provided with Rim  
Protector. Use of unsuitable tyres and wheel caps may cause sudden decrease of tyre pressure.  
161  
WARNING  
70) With snow chains, use the accelerator with extreme care to prevent, or to limit as much as possible, slipping of the drive wheels that  
could cause chain breakage, resulting in damage to the car body or mechanical components.  
162  
DIMENSIONS  
Dimensions are expressed in mm and refer to the car equipped with its original tyres. Height is measured with car unladen.  
LUGGAGE COMPARTMENT CAPACITY Capacity (VDA standards) =225 litres  
Panda versions  
F1D0103  
137  
A
B
C
D
E
F
G
H
I
1551 /  
1605(*)  
1407 /  
1408(*)  
1409 /  
1414(*)  
3653  
747  
2300  
606  
1643  
1882  
(*) Natural Power versions.  
163  
Panda 4x4 versions  
F1D0104  
138  
A
B
C
D
E
F
G
H
I
3686 /  
3653(*)  
1672 /  
1643(*)  
765 / 747  
2300  
1605  
1408  
1411  
1882  
621 / 606 (*)  
(*) VAN versions.  
164  
Panda Cross versions  
F1D0121  
139  
A
B
C
D
E
F
G
H
I
1406 /  
1412(*) –  
1403 /  
1416(*) –  
1656.5 /  
1635(*)  
3705  
772.5  
2300  
632.5  
1662  
1882  
1422(*)  
1426(*)  
(*) Panda Cross 4x2 versions  
165  
WEIGHTS  
Panda versions  
0.9 TwinAir Turbo  
80HP / 85HP  
0.9 TwinAir Turbo  
Natural Power  
Weights (kg)  
0.9 TwinAir 60HP / 65HP  
Unladen weight (with all fluids, fuel tank 90% full and  
without optional equipment):  
955  
975 / 980  
1080/1090 (***)  
460 (4-seater) /  
450(***) (4-seater) /  
480 (4-seater) /  
500 (5-seater)  
480 (4-seater) /  
500 (5-seater)  
Payload including the driver: (*)  
470 (5-seater) /  
460(***) (5-seater)  
Maximum permitted loads (**)  
- front axle:  
770  
760  
855  
760  
875  
810  
– rear axle:  
1455 (4 seats) /  
1460 (4 seats) (°) /  
1435 (4-seater) /  
1455 (5-seater)  
1540 (4-seater) /  
1550 (5-seater)  
- total:  
1475 (5-seater) /  
1480 (5-seater) (°)  
Towable loads  
– braked trailer:  
800  
800  
(°°)  
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum  
permitted loads.  
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted  
loads.  
(***) For versions/markets, where foreseen  
(°) Versions equipped with the "Dualogic" gearbox  
(°°) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.  
166  
0.9 TwinAir Turbo  
80HP / 85HP  
0.9 TwinAir Turbo  
Natural Power  
Weights (kg)  
– non-braked trailer:  
0.9 TwinAir 60HP / 65HP  
400  
55  
400  
55  
(°°)  
55  
Maximum load on roof:  
Maximum load on ball joint (braked trailer):  
60  
60  
(°°)  
(°°) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.  
167  
1.3 16V Multijet  
80HP/95HP  
Weights (kg)  
1.2 8V 69 HP  
1.2 8V 69 HP LPG  
Unladen weight (with all fluids, fuel tank 90% full and  
without optional equipment):  
980  
1045  
940/965(****)  
480 (4-seater)(1) / 470  
(4-seater) (2) / 500  
(5-seater)(1) / 490  
(5-seater) (2)  
480 (4-seater) /  
455(****) (4-seater) / 500  
470  
Payload including the driver: (*)  
(5-seater) / 475(****)  
(5-seater)  
Maximum permitted loads (**)  
- front axle:  
770  
760  
770  
760  
855  
760  
– rear axle:  
1420 (4-seater) / 1440  
(5-seater)  
1515 (4-seater) /  
1535 (5-seater)  
- total:  
1450  
Towable loads  
– braked trailer:  
800  
400  
55  
900  
400  
55  
(***)  
(***)  
55  
– non-braked trailer:  
Maximum load on roof:  
Maximum load on ball joint (braked trailer):  
60  
60  
(***)  
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum  
permitted loads.  
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted  
loads.  
(***) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.  
(****) For versions/markets, where foreseen  
(1) 80 HP  
(2) 95 HP  
168  
Panda Cross and Panda 4x4 versions  
Weights (kg)  
0.9 TwinAir Turbo  
85 HP  
0.9 TwinAir Turbo  
90 HP  
1.3 16V Multijet  
80HP/95HP  
1.2 8V 69 HP  
Unladen weight (with all fluids, fuel tank  
90% full and without optional  
equipment):  
1125 (°) / 1090 (°°) /  
1165 (°°°)  
1050  
1090  
1000  
470 (4-seater) (°) /  
425 (4-seater) (°°) /  
430 (4-seater) (°°°) /  
490 (5-seater) (°) /  
445 (5-seater)(°°) /  
460 (5-seater) (°°°)  
480 (4-seater) /  
500 (5-seater)  
440 (4 seats) /  
495 (5 seats)  
455 (4 seats) /  
475 (5 seats)  
Payload including the driver: (*)  
Maximum permitted loads (**)  
- front axle:  
875  
810  
875  
810  
855  
760  
875 / 855 (°°)  
810 / 760 (°°)  
– rear axle:  
(°) Panda 4x4 versions  
(°°) Panda Cross 4x2 versions  
(°°°) Panda Cross 4x4 versions  
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum  
permitted loads.  
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted  
loads.  
169  
0.9 TwinAir Turbo  
85 HP  
0.9 TwinAir Turbo  
90 HP  
1.3 16V Multijet  
80HP/95HP  
Weights (kg)  
1.2 8V 69 HP  
1595 (4 seats) /  
1515 (4 seats) (°°) /  
1530 (4-seater) /  
1550 (5-seater)  
1530 (4 seats) /  
1585 (5 seats)  
1455 (4 seats) /  
1475 (5 seats)  
1615 (5-seater) (°) /  
1535 (5-seater) (°°) /  
1625 (5-seater) (°°°)  
- total:  
Towable loads  
– braked trailer:  
800  
400  
55  
800  
400  
800  
400  
60  
900  
400  
– non-braked trailer:  
Maximum load on roof:  
60 (***)  
60 (***) (°°°°)  
Maximum load on ball joint (braked  
trailer):  
60  
60  
60  
60  
(°) Panda 4x4 versions  
(°°) Panda Cross 4x2 versions  
(°°°) Panda Cross 4x4 versions  
(°°°°) Panda Cross 4x2 and 4x4 versions  
(***) Load evenly distributed  
170  
Panda VAN versions  
Weights (kg)  
0.9 TwinAir Turbo  
85 HP  
0.9 TwinAir Turbo  
85 HP 4x4  
0.9 TwinAir Turbo  
Natural Power  
0.9 TwinAir 65 HP  
Unladen weight (with all fluids, fuel tank  
90% full and without optional  
equipment):  
950 (2-seater) /  
960 (4-seater)  
980  
1035  
510  
1075  
505 (2-seater) /  
490 (4-seater)  
500 (2 seats) /  
490 (4 seats)  
Payload including the driver: (*)  
420 (°) / 460  
Maximum permitted loads (**)  
- front axle:  
770  
855  
875  
810  
875  
810  
770 (2-seats /  
780 (4-seats)  
770 (2 seats) /  
780 (4 seats)  
– rear axle:  
- total:  
1455 (2-seats) /  
1450 (4-seats)  
1480 (2 seats) /  
1470 (4 seats)  
1545  
1495 (°) / 1535  
Towable loads  
– braked trailer:  
800  
400  
60  
800  
400  
60  
800  
400  
60  
(***)  
(***)  
60  
– non-braked trailer:  
Maximum load on roof:  
Maximum load on ball joint (braked  
trailer):  
60  
60  
60  
(***)  
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum  
permitted loads.  
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted  
loads.  
(***) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.  
(°) Versions with reduced capacity  
171  
1.3 16V MultiJet  
80 HP  
1.3 16V MultiJet 4x4  
80 HP  
Weights (kg)  
1.2 8V 69 HP  
1.2 8V 69 HP LPG  
Unladen weight (with all fluids, fuel tank  
90% full and without optional  
equipment):  
935 (2-seater) /  
945 (4-seater)  
1040 (2-seater) /  
1050 (4-seater)  
975  
1110  
485  
400 (2-seater) (°) /  
495 (2-seater) /  
485 (4-seater)  
505 (2-seater) /  
490 (4-seater)  
470  
Payload including the driver: (*)  
Maximum permitted loads (**)  
- front axle:  
855 (2-seater) /  
875 (4-seater)  
770  
770  
770  
875  
810  
770 (2-seats) /  
780 (4-seats)  
770 (2-seats) /  
780 (4-seats)  
– rear axle:  
- total:  
1440 (2-seater) (°) /  
1535 (2-seater) /  
1535 (4-seater)  
1440 (2-seater) /  
1435 (4-seater)  
1445  
1595  
Towable loads  
– braked trailer:  
800  
400  
60  
(***)  
(***)  
60  
900  
400  
60  
900  
400  
-
– non-braked trailer:  
Maximum load on roof:  
Maximum load on ball joint (braked  
trailer):  
60  
60  
60  
(***)  
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum  
permitted loads.  
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted  
loads.  
(***) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.  
(°) Versions with reduced capacity  
172  
REFUELLING  
1.2 8V 69 HP  
Panda / Panda Recommended fuels and original lubricants  
Cross 4x2  
0.9 TwinAir  
60 HP/65 HP  
0.9 TwinAir  
Turbo  
Fuel tank (litres):  
37  
37  
37  
Unleaded petrol with RON no lower than 95  
(EN228 specifications)  
including a reserve of (litres):  
5 ÷ 7  
5 ÷ 7  
5 ÷ 7  
Mixture of distilled water and PARAFLU UP liquid  
at 50% (**)  
Engine cooling system  
4.8  
5.2  
4.6  
SELENIA DIGITEK P.E (0.9 TwinAir and 0.9  
2.5  
Engine sump (litres):  
2.8  
3.2  
2.8  
3.2  
TwinAir Turbo versions) / SELENIA K P.E. (1.2 8V  
69 HP versions) / SELENIA MULTIPOWER GAS  
5W-40 (LPG versions)  
Engine sump and filter (litres):  
2.8  
TUTELA TRANSMISSION TECHNYX (0.9  
TwinAir and 0.9 TwinAir Turbo versions) /  
TUTELA TRANSMISSION GEARFORCE (1.2 8V  
69HP, LPG and Natural Power versions)  
1.65 (litres) /  
(1.7) kg (***)  
Gearbox casing/differential:  
1.65 (litres)  
1.65 (litres)  
-
-
0.62  
0.7  
-
-
TUTELA TRANSMISSION CROSS  
TUTELA CS SPEED  
Rear differential (kg) (***)  
:
Dualogic gearbox hydraulic  
activation system (litres):  
Hydraulic brake circuit (litres):  
0.55  
2.7  
0.55  
2.7  
0.55  
2.7  
TUTELA TOP 4 or TUTELA TOP 4/S  
Front and rear windscreen  
washer tanks (litres):  
Mixture of water and PETRONAS DURANCE  
SC35  
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLUUP and 40% demineralised water.  
(***)Panda Cross 4x4 and Panda 4x4 versions  
173  
1.3 16V Multijet Panda  
Cross / Panda 4x4  
Recommended fuels and original  
lubricants  
1.3 16V MultiJet  
Fuel tank (litres):  
37  
35  
Diesel for motor vehicles (EN590  
Specification)  
including a reserve of (litres):  
5 ÷ 7  
5 ÷ 7  
Mixture of distilled water and  
PARAFLU UP liquid at 50% (**)  
Engine cooling system  
6.3  
6.3  
Engine sump (litres):  
3.7  
3.9  
3.7  
3.9  
SELENIA WR FORWARD  
Engine sump and filter (litres):  
TUTELA TRANSMISSION  
GEARFORCE  
Gearbox casing/front differential (kg):  
1.8  
1.70  
Drive transmission idler unit (PTU) (kg):  
Rear differential (kg):  
-
-
0.39  
0.62  
0.55  
TUTELA TRANSMISSION MULTIAXLE  
TUTELA TRANSMISSION CROSS  
TUTELA TOP 4 or TUTELA TOP 4/S  
Hydraulic brake circuit (litres):  
0.55  
Front and rear windscreen washer tanks  
(litres):  
Mixture of water and PETRONAS  
DURANCE SC35  
2.7  
2.7  
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLUUP and 40% demineralised water.  
174  
FLUIDS AND LUBRICANTS  
Your car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the  
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission  
specifications. Lubricant quality is crucial for engine operation and duration. If lubricants conforming to the required  
specifications are not available, products that meet the indicated specifications can be used to top up; in this case optimal  
performance of the engine is not guaranteed.  
71)  
Original fluids and  
lubricants  
Use  
Features  
Specification  
9.55535-S2  
Replacement interval  
Lubricants for petrol  
engines and 1.2 8V  
69HP  
SELENIA K P.E.  
Contractual Technical  
Reference N° F603.C07  
SAE 5W-40 ACEA C3 /  
API SN.  
According to Service  
Schedule  
Lubricants for petrol  
engines 0.9 TwinAir  
and 0.9 TwinAir  
Turbo  
SELENIA DIGITEK P.E.  
Contractual Technical  
Reference N° F020.B12  
SAE 0W-30 ACEA C2 /  
API SN.  
According to Service  
Schedule  
9.55535-GS1  
9.55535-GS1  
9.55535-T2  
SELENIA DIGITEK P.E.  
Contractual Technical  
Reference N° F020.B12  
Lubricant for petrol/  
methane engines  
SAE 0W-30 ACEA C2 /  
API SN.  
According to Service  
Schedule  
SELENIA MULTIPOWER  
GAS 5W-40  
Contractual Technical  
Reference No. F922.E09  
Lubricant for petrol/  
LPG engines  
SAE 5W-40 ACEA C3 /  
API SM.  
According to Service  
Schedule  
SELENIA WR FORWARD  
Contractual Technical  
Reference N° F842.F13  
Diesel engine  
lubricants  
9.55535-DS1 or  
MS.90047  
According to Service  
Schedule  
SAE 0W-30 ACEA C2.  
175  
Original fluids and  
lubricants  
Use  
Features  
Specification  
9.55550-MX3  
Applications  
TUTELA TRANSMISSION  
TECHNYX  
Contractual Technical  
Reference N° F010.B05  
SAE 75W- 85 grade  
synthetic lubricant.  
9.55550-MX3  
Manual gearbox and  
differential (0.9 TwinAir and  
0.9 TwinAir Turbo versions)  
TUTELA TRANSMISSION Manual gearbox and  
GEARFORCE  
Contractual Technical  
Reference N° F002.F10  
SAE 75W grade synthetic  
lubricant.  
differential (1.3 16V Multijet,  
LPG, and 1.2 8V 69HP and  
Natural Power versions)  
9.55550-MZ6  
9.55550-SA1  
9.55550 - DA4  
TUTELA CS SPEED  
Contractual Technical  
Reference N° F005.F98  
Fully synthetic oil with  
dedicated additive.  
Dualogic gearbox hydraulic  
activation system  
TUTELA TRANSMISSION  
CROSS  
Contractual Technical  
Reference N° F001.D12  
Lubricants and  
greases for drive  
transmission  
SAE 75W-85 grade  
synthetic lubricant.  
Rear differential (°)  
SAE 75W-85 grade  
synthetic lubricant, which  
exceeds API GL5  
specifications.  
TUTELA TRANSMISSION  
MULTIAXLE  
Contractual Technical  
Reference N° F426.E06  
Drive transmission idler unit  
(PTU) (°)  
9.55550 - DA3  
Molybdenum disulphide  
grease, for use at high  
temperatures. N.L.G.I.  
consistency 1-2.  
TUTELA ALL STAR  
Contractual Technical  
Reference N° F702.G07  
Wheel side constant  
velocity joints  
9.55580 - GRASS II  
9.55580 - GRASS II  
Low friction coefficient  
grease for constant  
velocity joints. N.L.G.I.  
consistency 0-1.  
TUTELA STAR 700  
Contractual Technical  
Reference N° F701.C07  
Differential side constant  
velocity joints  
(°) Panda Cross 4x4 and Panda 4x4 versions.  
176  
Original fluids and  
lubricants  
Use  
Features  
Specification  
Applications  
TUTELA TOP 4  
Synthetic fluid for brake  
and clutch systems.  
Exceeds specifications:  
FMVSS no. 116 DOT 4,  
ISO 4925 SAE J1704.  
Contractual Technical  
Reference N° F001.A93 or  
TUTELA TOP 4/S  
Contractual Technical  
Reference N° F005.F15  
Hydraulic brakes and  
hydraulic clutch controls  
Brake fluid  
9.55597 or MS.90039  
Protective agent with  
anti-freeze action and  
organic formulation. CUNA  
NC 956-16, ASTM D 3306  
specifications.  
PARAFLUUP (*)  
Contractual Technical  
Reference N° F101.M01  
Cooling circuits proportions  
of use: 50% water 50%  
PARAFLUUP (**)  
Protective agent for  
radiators  
9.55523 or MS.90032  
PETRONAS DURANCE  
DIESEL ART  
Contractual Technical  
Reference N° F601.C06  
Additive for diesel with  
antifreeze and protective  
action for diesel engines  
To be mixed with diesel (25  
cc per 10 litres)  
Diesel fuel additive  
-
Mixture of spirits and  
surfactants. Exceeds  
CUNA NC 956-11  
specifications.  
PETRONAS DURANCE  
SC35  
Contractual Technical  
Reference N° F001.D16  
To be used diluted or  
undiluted in windscreen  
washer/wiper systems  
Windscreen/rear  
window washer fluid  
9.55522 or MS.90043  
(*) IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.  
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLUUP and 40% demineralised water.  
WARNING  
71) The use of products with different specifications than those indicated below could cause damage to the engine not covered by the  
warranty.  
177  
PERFORMANCE  
Top speeds after the initial period of usage of the car.  
Versions  
km/h  
158 in 4th gear  
0.9 TwinAir 60 HP (*)  
0.9 TwinAir 65 HP  
160  
175  
0.9 TwinAir Turbo 80 HP (*)  
0.9 TwinAir Turbo 80 HP Dualogic (*)  
0.9 TwinAir Turbo 85 HP  
0.9 TwinAir Turbo 85 HP Dualogic (*)  
0.9 TwinAir Turbo 85 HP 4x4  
0.9 TwinAir Turbo 90 HP Cross 4x4  
0.9 TwinAir Turbo Natural Power  
1.2 8V 69 HP  
175  
177  
177  
166  
167  
170 (°) / 168(°°)  
164  
164  
1.2 8V 69 HP LPG  
1.2 8V 69 HP S&S Cross 4x2  
1.3 16V MultiJet 80 HP  
155 in 4th gear  
170  
1.3 16V Multijet 80HP 4x4  
1.3 16V MultiJet 95 HP  
160  
182  
1.3 16V MultiJet 95 HP 4x4  
1.3 16V Multijet 95 HP Cross 4x4  
1.3 16V Multijet 95 HP S&S Cross 4x2  
167  
168  
169  
(*) For versions/markets, where provided  
(°) Running on petrol  
(°°) Running on methane  
178  
FUEL CONSUMPTION  
The fuel consumption figures given in the tables below are determined on the basis of the type-approval tests laid down by  
specific European Directives.  
IMPORTANT The type of route, traffic conditions, weather conditions, driving style, general condition of the car, trim level/  
equipment/accessories, use of the climate control system, car load, presence of roof racks and other situations that adversely  
affect the aerodynamics or wind resistance lead to different fuel consumption values than those measured. The fuel  
consumption will get more regular only after having driven the first 3000 km.  
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)  
NOTE Consumption of methane-fuelled Natural Power versions is intended in m3/100 km.  
Versions  
Urban  
4.5  
Extra-urban  
Combined  
3.4  
3.8  
0.9 TwinAir 60 HP (*)  
0.9 TwinAir 65 HP  
5.0 / 4.8 (*)  
4.4  
3.8 / 3.7 (*)  
4.2 / 4.1 (*)  
3.4  
3.8  
0.9 TwinAir Turbo 80 HP (*)  
0.9 TwinAir Turbo 80 HP Dualogic (*)  
0.9 TwinAir Turbo 85 HP  
4.4  
3.4  
3.8  
3.8  
4.2  
5.0 / 4.9 (*)  
0.9 TwinAir Turbo 85 HP Dualogic  
0.9 TwinAir Turbo 85 HP 4x4  
0.9 TwinAir Turbo 90 HP Cross 4x4  
0.9 TwinAir Turbo Natural Power  
1.2 8V 69 HP  
4.8  
3.7  
4.1  
5.9  
5.9  
4.3  
4.3  
4.9  
4.9  
5.8 (°) / 6.0 (°°)  
6.7 / 6.5 (*) / 5.9 (*)  
5.9  
3.8 (°) / 4.0 (°°)  
4.3 / 4.2 (*) / 4.0 (*)  
4.0  
4.5 (°) / 4.7 (°°)  
5.2 / 5.0 (*) /4.7 (*)  
4.7  
1.2 8V 69 HP S&S  
(*) For versions/markets, where provided.  
(°) Running on petrol  
(°°) Running on methane  
179  
Versions  
Urban  
Extra-urban  
Combined  
1.2 8V 69 HP LPG  
6.6 (°) / 6.9 (°°°)  
4.3 (°) / 6.3 (°°°)  
5.1 (°) / 6.5 (°°°)  
1.2 8V 69 HP S&S Cross 4x2  
1.3 16V MultiJet 80 HP  
1.3 16V Multijet 80HP 4x4  
1.3 16V MultiJet 95 HP  
1.3 16V MultiJet 95 HP 4x4  
1.3 16V Multijet 95 HP Cross 4x4  
1.3 16V Multijet 95 HP S&S Cross 4x2  
7.3  
4.3  
4.7  
4.3  
4.7  
4.8  
4.3  
4.5  
3.2  
4.3  
3.2  
4.3  
4.4  
3.3  
5.5  
3.6  
4.4  
3.6  
4.4  
4.8  
3.7  
(°) Running on petrol  
(°°°) Running on LPG  
180  
CO2 EMISSIONS  
The CO2 emission levels given in the following tables refer to combined consumption.  
CO2 EMISSIONS ACCORDING TO CURRENT EUROPEAN DIRECTIVE  
(g/km)  
Versions  
88  
0.9 TwinAir 60 HP (*)  
0.9 TwinAir 65 HP  
99 / 95 (*)  
88  
0.9 TwinAir Turbo 80 HP (*)  
0.9 TwinAir Turbo 80 HP Dualogic (*)  
0.9 TwinAir Turbo 85 HP  
0.9 TwinAir Turbo 85 HP Dualogic  
0.9 TwinAir Turbo 85 HP 4x4  
0.9 TwinAir Turbo 90 HP Cross 4x4  
0.9 TwinAir Turbo Natural Power  
1.2 8V 69 HP  
88  
99 / 97 (*)  
95  
114  
114  
106 (°) / 85 (°°)  
120 / 117 (*) / 119 (*) /110 (*)  
1.2 8V 69 HP S&S  
110  
1.2 8V 69 HP LPG  
119 (°) / 106 (°°°)  
1.2 8V 69 HP S&S Cross 4x2  
1.3 16V MultiJet 80 HP  
129  
94  
1.3 16V Multijet 80HP 4x4  
1.3 16V MultiJet 95 HP  
117  
94  
1.3 16V MultiJet 95 HP 4x4  
117  
(*) For versions/markets, where provided.  
(°) Running on petrol.  
(°°) Running on methane.  
(°°°) Running on LPG.  
181  
CO2 EMISSIONS ACCORDING TO CURRENT EUROPEAN DIRECTIVE  
(g/km)  
Versions  
1.3 16V Multijet 95 HP Cross 4x4  
119  
97  
1.3 16V Multijet 95 HP S&S Cross 4x2  
182  
PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF  
ITS LIFE  
(Where provided)  
FCA has been committed for many years to safeguarding the environment through the constant improvement of its production  
processes and manufacturing products that are increasingly "eco-compatible". To grant customers the best possible service  
in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of  
their life, FCA is offering its customers the chance to hand over their vehicle at the end of its life without incurring any additional  
costs. The European Directive sets out that when the vehicle is handed over, the last keeper or owner should not incur any  
expenses as a result of it having a zero or negative market value.  
To hand your vehicle over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another  
vehicle or an FCA-authorised collection and scrapping centre. These centres have been carefully chosen to offer high quality  
service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.  
You can find further information on these collection and scrapping centres either from an FCA dealership or by calling the  
number in the Warranty Booklet or by consulting the websites of the various FCA brands.  
183  
MULTIMEDIA  
RADIO.............................................185  
UCONNECT RADIO ........................193  
This chapter describes the main  
functions of the radio and of the  
Uconnect Radio that may be fitted on  
the vehicle.  
RADIO EQUIPMENT DIRECTIVE  
2014/53/EU ....................................208  
184  
If the check has a positive outcome, the  
radio will start to function, whereas if  
the comparison codes are not the  
same or if the electronic control unit  
(Body Computer) is replaced, the  
device will ask the user to enter the  
secret code according to the procedure  
described in the paragraph below.  
Entering the secret code  
Each time the user enters an incorrect  
code, the waiting time will gradually  
increase (1 min, 2 min, 4 min, 8 min, 16  
min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)  
up to a maximum of 24 hours.  
RADIO  
181) 182) 183) 184) 185) 186)  
The radio has been designed according  
to the specifications of the passenger  
compartment, with a personalised  
design matching the style of the  
dashboard perfectly.  
The waiting time will be shown on the  
display with the text "Radio blocked/  
wait". After the text has disappeared it  
is possible to start the code entering  
procedure again.  
TIPS  
When the radio is switched on, if the  
password is requested, the display will  
show "Radio code" for about 2  
seconds, followed by four dashes "- - -  
-".  
Road safety  
Vehicle radio passport  
Please, learn how to use all different  
radio functions (e.g. save stations)  
before beginning to drive.  
This document certifies the ownership  
of the vehicle radio. The radio passport  
shows the radio model, serial number  
and secret code.  
Care and maintenance  
The secret code is made up of four  
digits from 1 to 6, each corresponding  
to one of the dashes.  
Clean the cover with a soft anti-static  
cloth only. Cleaning and polishing  
products may damage the surface.  
IMPORTANT Keep the radio passport in  
a safe place so that you can give the  
information to the relevant authorities if  
the radio is stolen.  
To enter the first digit of the code, press  
the button corresponding to the  
pre-selected stations (from 1 to 6).  
Enter the other code digits in the same  
way.  
ANTITHEFT PROTECTION  
The radio is equipped with an anti-theft  
protection system based on the  
exchange of information between the  
radio and the electronic control unit  
(Body Computer) present on the  
vehicle.  
In the case of loss of the vehicle radio  
passport, contact the Fiat Dealership,  
taking an ID document and the vehicle  
ownership documents.  
If the four digits are not entered within  
20 seconds, the display shows the text  
"Enter code - - - -". If this occurs, it is  
not considered an incorrect code entry.  
After entering the fourth digit (within  
20 seconds), the car radio will work.  
If an incorrect code is entered, the radio  
will emit a sound and the display will  
show "Radio blocked/wait" to notify the  
user of the need to enter the correct  
code.  
This system guarantees maximum  
safety and prevents the secret code  
from being entered each time the radio  
power supply is disconnected.  
185  
QUICK GUIDE  
F1D0695  
140  
186  
General functions  
Button  
Functions  
Mode  
Switching on  
short button press  
short button press  
turn knob left/right  
Switching off  
Volume adjustment  
FM AS  
AM  
FM1, FM2, FM Autostore radio source selection  
MW1, MW2 radio source selection  
CD source selection  
short cyclical button press  
short cyclical button press  
short cyclical button press  
MEDIA  
Volume activation/deactivation (Mute/Pause)  
Short button press  
Audio adjustments: low tones (BASS), high tones  
(TREBLE), RH/LH balance (BALANCE), front/rear  
balance (FADER) (where provided)  
Menu activation: short button press  
Adjustment type selection: press  
or  
buttons.  
buttons.  
buttons.  
Value adjustment: press  
or  
Menu activation: short button press  
Adjustment type selection: press  
Value adjustment: press or  
MENU  
Advanced functions adjustment  
or  
buttons.  
187  
Radio functions  
Button  
Functions  
Mode  
Automatic search: press  
button down for fast forward)  
or  
buttons (hold the  
Radio station search:  
Automatic search  
Manual search: press or  
down for fast forward)  
buttons (hold the button  
Manual search  
Store current radio station  
Stored station recall  
Long button press for memory preset from 1 to 6  
Brief button press for memory preset from 1 to 6  
1 2 3 4 5 6  
.
CD functions  
Button  
Functions  
Mode  
CD ejection  
Short button press  
Play previous/next track  
Brief press of  
Long press of  
or  
or  
buttons  
buttons  
Fast forwarding/rewinding CD track  
Playing previous/next folder (for CD-MP3)  
Brief press of  
or  
buttons  
188  
GENERAL INFORMATION  
CD Display function: display of disc  
name and time elapsed since the  
start of the track  
FUNCTIONS AND  
ADJUSTMENTS  
The radio offers the following functions:  
Radio section  
Turning the car radio on  
Playing of audio CDs, CD-Rs and  
CD-RWs.  
MP3 CD section  
PLL tuning with FM/AM/MW  
frequency bands;  
The car radio comes on when the  
(ON/OFF) button/knob is pressed  
briefly.  
RDS (Radio Data System) with TA  
(traffic alerts) function - TP (traffic  
MP3-Info function (ID3-TAG);  
Folder selection (previous/next);  
Track selection (forward/back);  
When the radio is turned on with the  
key extracted from the ignition switch, it  
turns off automatically after about 20  
minutes. After the radio has switched  
itself off automatically it can be turned  
on for a further 20 minutes by pressing  
programmes) - EON (Enhanced Other  
Network) - REG (regional programmes);  
AF: search selection for alternative  
frequencies in RDS mode;  
Fast advance (forward/back) through  
tracks;  
provision for emergency alarm;  
MP3 Display function: display of  
name of folder, ID3-TAG information,  
time elapsed since the start of the  
track, name of the file  
the  
(ON/OFF) button/knob.  
automatic/manual tuning into  
stations;  
Turning the car radio off  
Briefly press the  
button/knob.  
(ON/OFF)  
FM Multipath detector;  
Playing of audio or data CD, CD-R  
and CD-RW.  
Audio section  
manual storing of 30 stations: 18 on  
FM band (6 on FM1, 6 on FM2, 6 on  
FMT), 12 on MW band (6 on MW1,  
6 on MW2);  
Volume adjustment  
Turn the (ON/OFF) button/knob to  
adjust the volume.  
Mute/Pause function;  
Soft-Mute function;  
automatic programming (Autostore  
function) of 6 stations on dedicated  
FM band  
If the volume level is changed during  
the transmission of traffic news, the  
new setting will only be maintained until  
the news is finished.  
Loudness function  
7-band graphic equaliser;  
Separate bass/treble adjustment  
Right/left channel balance.  
SPEED VOLUME function:  
automatic volume adjustment  
according to the vehicle speed;  
MUTE/Pause function  
automatic Stereo/Mono selection.  
(muting the volume)  
CD section  
Press the button briefly to activate  
the Mute function. The volume will  
gradually decrease and the words  
"RADIO Mute" will be displayed (in radio  
mode) or "PAUSE" (in CD mode).  
Direct selection of the disc;  
Track selection (forward/back);  
Fast advance (forward/back) through  
tracks;  
189  
Press the button again to deactivate  
the Mute function. The volume will  
gradually increase until it reaches the  
level set previously.  
EQUALISER: activation and  
selection of factory-set equaliser levels;  
RADIO ON VOLUME: maximum  
radio volume limit activation/  
deactivation.  
USER EQUALIZER: customised  
equaliser setting.  
RADIO OFF: off mode selection.  
SYSTEM RESET: reset of factory  
settings.  
Audio settings  
MENU  
MENU button function  
The functions that can be selected from  
the audio menu change depending on  
the context: AM/FM/CD.  
Press the button MENU again to exit  
the Menu function.  
Press the button MENU briefly to  
activate the Menu function. The display  
will show the first menu item that can  
be adjusted (AF) ("AF Switching On" on  
the display).  
Press the button briefly to change  
the Audio functions.  
NOTE The AF SWITCHING, TRAFFIC  
INFORMATION and REGIONAL MODE  
adjustments are only possible in FM  
mode.  
After the  
button is first pressed, the  
display will show the bass level value  
for the source activated at that time  
(e.g. in FM mode the display will show  
the wording "FM Bass +2").  
Use the  
or buttons to scroll  
through the Menu functions. To change  
the setting of the function selected  
RADIO (Tuner)  
To select the Radio function when  
another audio source is being listened  
to, briefly press the FM, AS or AM  
buttons, depending on the desired  
band.  
use the  
or buttons.  
Use the or buttons to scroll  
through the menu functions. To change  
the setting of the function selected  
The current status of the selected  
function appears on the display.  
The functions managed by the Menu  
are:  
use the  
or buttons. The current  
status of the selected function appears  
on the display.  
Once the Radio mode has been  
activated, the display will show the  
name (only RDS stations) and the  
frequency of the selected radio station,  
the frequency band selected (e.g.  
FM1) and the preselect button number  
(e.g. P1).  
AF SWITCHING: automatic  
activation/deactivation of the selection  
of the station with the strongest signal  
that transmits the same programme.  
The functions managed by the Menu  
are:  
BASS: adjustment of bass tones;  
TREBLE: adjustment of high tones;  
TRAFFIC INFORMATION:  
activation/deactivation of traffic  
information (only on FM band).  
BALANCE: right/left balance  
adjustment;  
Frequency band selection  
REGIONAL MODE: activation/  
deactivation of regional programmes.  
FADER: front/back balance  
adjustment (where provided).  
With the Radio mode active, press the  
FM, AS or AM button briefly and  
repeatedly to select the desired  
reception band.  
MP3 DISPLAY: CD MP3 display  
setting.  
LOUDNESS: activation/deactivation  
of the increase of bass and high tones;  
SPEED VOLUME: speed-dependent  
automatic volume control.  
190  
Each time the button is pressed, the  
AM and FM bands are selected  
cyclically:  
Manual tuning  
Press the (EJECT) button with the  
radio on to activate the motorised  
ejection of the CD. After ejection, the  
last audio source listened to before  
playing the CD will be heard.  
Select the desired frequency band and  
then press the or button briefly  
and repeatedly to start to the search in  
the desired direction. If the or  
button is pressed longer, the fast  
search will start and then stop when the  
button is released.  
Preset buttons  
The buttons numbered from 1 to 6 are  
used to set the following preset  
stations:  
72)  
Indications on the display  
18 in the FM band (6 in FM1, 6 in  
FM2, 6 in FMT or "FMA" (on some  
versions);  
CD PLAYER  
When the CD player is in operation,  
information appears on the display with  
the following meanings:  
To activate the CD player built-into the  
equipment, proceed as follows:  
12 in the MW band (6 in MW1, 6 in  
MW2).  
"CD Track 5": indicates the number  
of the CD track;  
insert a CD with the equipment  
switched on: the first track will start to  
To listen to a preset station, select the  
desired frequency band and then press  
the corresponding preset button briefly  
(from 1 to 6).  
"03:42": indicates the time elapsed  
since the start of the track (if the  
respective Menu function is activated).  
play;  
or  
if a CD has already been loaded,  
switch on the radio and then briefly  
press the CD button to select the “CD”  
operating mode: the last track listened  
to will start to play.  
By pressing the preset button for more  
than 2 seconds, the tuned station will  
be stored. The storing phase is  
confirmed by an acoustic signal.  
Track selection (forward/back)  
Briefly press the button to play the  
previous CD track and the button to  
play the next track.  
It is advisable to use original CDs to  
ensure optimal playback. If CD-R/RW  
are used, we recommend using good  
quality media that are burned at the  
slowest speed possible.  
Automatic tuning  
Fast forward/rewind through tracks  
Briefly press the or button to start  
the automatic tuning search for the  
next station that can be received in the  
selected direction.  
Hold down the  
button to fast  
forward the selected track or hold  
down the button to fast rewind the  
track.  
CD loading/ejection  
The fast forward/rewind will stop once  
the button is released.  
To load the CD, insert it gently into the  
slot to activate the motorised loading  
system, which will position it correctly.  
191  
185) Looking at the display for a long time:  
while driving, do not use any function  
that requires looking at the display for a  
long time. Pull over in a safe and legal  
manner before attempting to access a  
function of the system that requires  
prolonged attention. Even occasional short  
glances at the display may be hazardous  
if your attention is diverted from driving at a  
critical moment.  
"Pause" function  
WARNING  
To pause the CD player, press the  
button. The words "CD Pause" will  
appear on the display.  
181) If the volume is too loud this could be  
dangerous for the driver and for  
passengers when driving in traffic. Always  
adjust the volume so that you can still  
hear background noises.  
To resume listening to the track, press  
the button again. If another audio  
source is selected, the pause function  
is deactivated.  
182) Multimedia CDs include data tracks in  
addition to the audio tracks. Playing this  
type of CD can cause hissing at a volume  
that may jeopardise road safety as well  
as cause damage to the final stages and  
the speakers.  
186) Setting the volume: do not turn the  
volume up too high. Keep the volume at a  
level where you can still hear outside traffic  
and emergency signals while driving.  
Driving while unable to hear these sounds  
may cause an accident.  
CD MP3 PLAYER  
In addition to playing normal audio  
CDs, the car radio can also play  
CD-ROMs on which MP3 format  
compressed audio files are recorded.  
The radio operates as described in the  
"CD Player" chapter when an ordinary  
audio CD is inserted.  
183) Using some of the system functions  
whilst driving can distract attention away  
from the road, risking an accident or other  
serious consequences; they should  
therefore be used only when driving  
conditions allow it and, if necessary, only  
with the vehicle stationary.  
WARNING  
72) Do not press the eject button  
accidentally when inserting a CD.  
Selecting next/previous folder  
Press the button to select one of the  
next folders or press the button to  
select a previous folder.  
184) IMPORTANT: Looking at the system  
when driving can divert attention from  
the road, with the risk of accidents or other  
serious consequences. Do not change  
the system settings or load data while  
driving. Stop the vehicle in a safe and legal  
manner before carrying out these  
The display will show the number and  
the name of the folder (e.g. “DIR 2  
XXXXXX”).  
operations. Adopting these precautions is  
important since setting or changing some  
functions may require the driver to be  
distracted from the road and remove their  
hands from the steering wheel.  
If no other folder/track is selected  
during the next 2 seconds, the first  
track contained in the new folder will be  
played.  
If the last track in the folder at that  
moment selected is played, the next  
folder will be played.  
192  
ANTITHEFT PROTECTION  
The Uconnect Radio is equipped with  
If the four digits are not entered within  
20 seconds, the display will show  
"Enter code - - - -". If this occurs, it is  
not considered an incorrect code entry.  
After entering the fourth digit (within  
20 seconds), the Uconnect Radio will  
start to operate.  
Uconnect RADIO  
187) 188) 189) 190) 191) 192) 193) 194) 195) 196)  
an anti-theft protection system based  
on the exchange of information  
between the Uconnect Radio and the  
electronic control unit (Body Computer)  
present on the car.  
The Uconnect Radio was designed  
according to the specific characteristics  
of the passenger compartment, with a  
customised design that perfectly  
matches matching the style of the  
dashboard.  
This system guarantees maximum  
safety and prevents the secret code  
from being entered each time the  
Uconnect Radio power supply is  
disconnected.  
If an incorrect code is entered, the  
Uconnect Radio will emit a sound and  
the display shows the text "Radio  
blocked/wait" to notify the user of the  
need to enter the correct code.  
Each time the user enters an incorrect  
code, the waiting time will gradually  
increase (1 min, 2 min, 4 min, 8 min, 16  
min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)  
up to a maximum of 24 hours.  
The instructions for use are given below  
and we recommend you to read them  
carefully.  
If the check has a positive outcome, the  
Uconnect Radio will start to operate,  
whereas if the comparison codes  
are not the same or if the electronic  
control unit (Body Computer) is  
replaced, the device will ask the user to  
enter the secret code according to  
the procedure described in the  
paragraph below.  
TIPS  
Familiarise yourself with the various  
functions of the Uconnect Radio (for  
example, storing the stations) before  
starting to drive.  
The waiting time will be shown on the  
display with the text "Radio blocked/  
wait". After the text has disappeared it  
is possible to start the code entering  
procedure again.  
Reception conditions  
Reception conditions change  
constantly while driving. Reception may  
be interfered with by the presence of  
mountains, buildings or bridges,  
especially when you are far away from  
the broadcaster.  
Entering the secret code  
When the Uconnect Radio is switched  
on, if the password is requested, the  
display will show "Radio code" for  
about 2 seconds, followed by  
four dashes "- - - -".  
Vehicle radio passport  
This document certifies ownership of  
the Uconnect Radio. The radio  
passport shows the Uconnect Radio  
model, serial number and secret code.  
IMPORTANT The volume may be  
increased when receiving traffic  
bulletins.  
The secret code is made up of four  
digits from 1 to 6, each corresponding  
to one of the dashes.  
IMPORTANT Keep the radio passport in  
a safe place so that you can give the  
information to the relevant authorities if  
the Uconnect Radio is stolen.  
Care and maintenance  
To enter the first digit, press the  
corresponding button of the preset  
stations (from 1 to 6). Enter the other  
code digits in the same way.  
Only clean the cover with a soft,  
anti-static cloth. Cleaning and polishing  
products may damage the surface.  
193  
In the case of loss of the car radio  
passport, contact the Fiat Dealership,  
taking an ID document and the car  
ownership documents.  
194  
QUICK GUIDE  
F1D0707  
141  
195  
General functions  
Button  
Functions  
Mode  
Switching on  
short button press  
long button press  
turn knob  
Switching off  
Volume adjustment  
RADIO  
ABC – 1 2 3 4 5 6  
MEDIA  
Select the radio source FM, AM, DAB (where present)  
Select preset ranges  
short cyclical button press  
short cyclical button press  
short cyclical button press  
Select Audio Bluetooth®, USB/iPod, AUX  
Activate Play/Pause for the Media source  
Activate Mute for the Radio and AUX sources  
Short button press  
(Play/Pause)  
Menu activation: short button press  
Adjustment type selection: press  
Audio adjustments: low tones (BASS), high tones  
(TREBLE), RH/LH balance (BALANCE), front/rear  
balance (FADER) (where provided)  
or  
buttons.  
buttons.  
buttons.  
Value adjustment: press  
or  
Menu activation: short button press  
Adjustment type selection: press  
Value adjustment: press or  
or  
buttons.  
MENU  
Advanced functions adjustment  
196  
Radio functions  
Button  
Functions  
Mode  
Automatic search: press  
down for fast forward)  
or  
buttons (hold the button  
buttons (hold the button  
Radio station search:  
Automatic search  
Manual search  
Manual search: press  
down for fast forward)  
or  
Store current radio station  
Stored station recall  
Long button press for memory preset 1 to 6 respectively  
Brief button press for memory preset from 1 to 6  
1 2 3 4 5 6  
197  
STEERING WHEEL CONTROLS  
F1D0106  
142  
198  
Button  
Functions  
Mode  
Enable/disable Audio Mute  
/
Short button press  
Return to the previous menu mode function  
+
–
Increasing volume  
Decreasing volume  
Button press  
Button press  
Select sources FM, AM, DAB (where present), Bluetooth®  
Audio, USB and AUX  
SRC  
Button press  
Radio: automatic search for the next tunable broadcaster -  
USB/iPod source: selecting the next track  
Button press  
Button press  
Radio: automatic search for the previous tunable  
broadcaster - USB/iPod source: selecting the previous track  
.
Multimedia support function  
Button  
Functions  
Accept an incoming phone call  
End the phone call in progress  
Reject an incoming phone call  
Deactivate a voice recognition  
Activate/deactivate Audio Mute  
Interrupt the reading of an SMS message  
Exit from the Main Menu of Bluetooth®  
/
Exit from a submenu and return to previous menu option  
Exit from the current menu option without saving  
Deactivate/reactivate the microphone during a phone conversation  
Mute the volume of the call tone for incoming phone calls  
199  
Button  
Functions  
Activation of voice recognition  
Interruption of the voice message in order to give a new voice command  
Adjust the audio volume of all functions: hands-free, text message reader, multimedia supports, voice  
messages, Radio, USB, depending on the active source.  
+/-  
Scroll through Menu items on the panel  
Select multimedia support tracks  
Scroll through SMS messages in the list  
Access to the radio menu displayed on the instrument panel  
Confirm manually selected menu option  
SRC/OK  
Select sources: FM, AM, DAB (where present), Bluetooth® AUDIO, USB and AUX  
Select the SMS message on the instrument panel  
The functions of the steering wheel controls are activated when the button is released.  
200  
GENERAL INFORMATION  
Bluetooth®  
Switching off  
The Uconnect Radio is equipped with  
the following functions:  
Radio section  
Long press on button  
(ON/OFF).  
For the Bluetooth® function, see the  
description in the dedicated paragraph.  
Volume adjustment  
USB/iPod section  
To adjust the volume, turn the twist  
control  
PLL tuning with FM/AM/MW  
frequency bands (where present);  
For the USB/iPod function, see the  
description in the dedicated paragraph.  
.
If the volume level is changed during  
the transmission of traffic news, the  
new setting will only be maintained until  
the news is finished.  
RDS (Radio Data System) with TA  
(traffic alerts) function - TP (traffic  
AUX section  
AUX source selection;  
programmes) - EON (Enhanced Other  
Network) - REG (regional programmes);  
AUX Offset function: alignment of  
the portable device volume with that of  
the other sources;  
Mute Function  
AF: search selection for alternative  
frequencies in RDS mode;  
(muting the volume)  
Press the  
Portable player playback.  
automatic/manual tuning into  
stations;  
/
button on the  
steering wheel to activate the Mute  
function. In the Radio source, the word  
“MUTE” will appear, associated with  
the active source.  
NOTE It is not possible to view the AUX  
source information on the radio display  
FM Multipath detector;  
manual storing of 36 or 54 stations:  
18 in the FM band (6 in FM-A, 6 in  
FM-B and 6 in FM-C) and 18 in AM (6  
in AM-A, 6 in AM-B and 6 in AM-C) and  
18 in DAB (where present);  
FUNCTIONS AND  
ADJUSTMENTS  
Press the  
/
button on the  
steering wheel again to deactivate the  
Mute function.  
Switching on  
The Uconnect Radio comes on when  
SPEED VOLUME function:  
automatic volume adjustment  
according to the car speed;  
Audio settings  
the  
pressed briefly.  
(ON/OFF) button/knob is  
The functions that can be selected from  
the audio menu change depending on  
the context: AM/FM and DAB (where  
present)/USB/iPod/Bluetooth®/AUX.  
Press the AUDIO button briefly to  
change the Audio functions. After the  
AUDIO button is first pressed, the  
display will show the bass level value  
for the source activated at that time  
(e.g. in FM mode the display will show  
the wording "FM Bass +2").  
If the Uconnect Radio is switched on  
when the key is removed from the  
ignition, it will switch off automatically  
after about 20 minutes (if this time  
has been set). After the Uconnect  
Radio has switched itself off  
automatic Stereo/Mono selection.  
Audio section  
Mute function;  
Soft-Mute function;  
Loudness function  
automatically it can be turned on for a  
further 20 minutes by pressing the  
(ON/OFF) button.  
7-band graphic equaliser;  
Separate bass/treble adjustment  
Right/left channel balance.  
201  
Use the  
or buttons to scroll  
AF SWITCHING: automatic  
Press the button MENU again to exit  
the Menu function.  
through the menu functions. To change  
the setting of the function selected  
activation/deactivation of the selection  
of the station with the strongest signal  
that transmits the same programme.  
NOTE The AF SWITCHING, TRAFFIC  
INFORMATION and REGIONAL MODE  
adjustments are only possible in FM  
mode.  
use the  
or buttons.  
The current status of the selected  
function appears on the display.  
The functions managed by the Menu  
are:  
NOTE FM following in DAB (where  
provided; the radio switches  
automatically to FM in case of low DAB  
signal and back to DAB as soon as  
the signal is available) is enabled by  
enabling AF.  
RADIO (Tuner)  
BASS: adjustment of bass tones;  
TREBLE: adjustment of high tones;  
To select the Radio function while  
listening to another audio source, briefly  
press the RADIO button several times  
to select the desired band, FM AM  
or DAB (where present).  
BALANCE: right/left balance  
adjustment;  
TRAFFIC INFORMATION: activation/  
deactivation of traffic information.  
FADER: front/back balance  
adjustment (where provided);  
Once the Radio mode has been  
activated, the display will show the  
name (only RDS stations) and the  
frequency of the selected radio station,  
the frequency band selected (e.g.  
FMA) and the preselect button number  
(e.g. P1).  
NOTE Traffic information is enabled only  
if tuned to the station broadcasting  
the announcement.  
LOUDNESS: activation/deactivation  
of the increase of bass and high tones;  
EQUALISER: activation and  
selection of factory-set equaliser levels;  
DAB INFO CATEGORIES (only  
enabled for DAB sources): single  
category enable/disable (Financial,  
News flash, Program info, Spec event,  
Sport report, Warning, Weather).  
MY EQ: customised equaliser  
setting.  
Each time the button is pressed, the  
FM, AM and DAB bands (where  
present) are selected cyclically.  
MENU  
REGIONAL MODE: activation/  
deactivation of regional programmes.  
MENU button functions  
Preset buttons  
Press the button MENU briefly to  
activate the Menu function.  
MP3 DISPLAY: MP3 display setting.  
The buttons numbered from 1 to 6 are  
used to set the following preset  
stations:  
SPEED VOLUME: speed-dependent  
automatic volume control.  
Use the or buttons to scroll  
through the menu functions. To change  
the setting of the function selected  
RADIO ON VOLUME: maximum  
radio volume limit activation/  
deactivation.  
18 in the FM band (6 in FM-A, 6 in  
FM-B and 6 in FM-C);  
use the  
or buttons.  
The functions managed by the Menu  
are:  
18 in the AM band (6 in AM-A, 6 in  
AM-B and 6 in AM-C).  
RADIO OFF: off mode selection.  
SYSTEM RESET: reset of factory  
settings.  
202  
To listen to a preset station, select the  
desired frequency band with the RADIO  
button, briefly press ABC button to  
select the preset band (A, B or C), and  
then briefly press the corresponding  
preset button (from 1 to 6).  
AUX MODE  
Accepting a call: you can accept an  
incoming call by pressing the  
on the steering wheel.  
button  
To activate the AUX source, press the  
MEDIA button or the SRC control  
on the steering wheel repeatedly until  
the corresponding source is displayed.  
Rejecting a call: you can reject a call  
with a long press of the  
the steering wheel.  
button on  
BLUETOOTH®  
By pressing the preset button for more  
than 2 seconds, the tuned station will  
be stored. The storing phase is  
Text message reader  
Bluetooth® technology allows you to  
use your mobile phone through the  
car's hands-free system, without the  
need for wires.  
To use the hands-free function it is  
necessary to have a mobile phone with  
Bluetooth® technology. To consult the  
list of compatible phones, see the site:  
www.mopar.eu/owner.  
(available only with mobile phones that  
support this function)  
confirmed by an acoustic signal.  
The SMS message reader makes it  
possible to:  
Automatic tuning  
Briefly press the or button to start  
the automatic tuning search for the  
next station that can be received in the  
selected direction.  
Be informed, by means of a  
message on the instrument panel  
display, of the reception a new SMS  
message on your mobile phone with  
Bluetooth® technology; the number/  
name of the sender is displayed and  
the system will also ask whether to read  
the message to you.  
The hands-free function allows the  
following operations to be performed:  
Manual tuning  
Calling a telephone number by voice  
command: you can dial a telephone  
number by stating the numbers out  
loud.  
Select the desired frequency band and  
then press the or button briefly  
and repeatedly to start to the search in  
the desired direction. If the or  
button is pressed longer, the fast  
search will start and then stop when the  
button is released.  
Manage the list of messages  
received on your mobile phone only  
during connection with the active  
system.  
Calling someone in the phonebook  
using voice commands: you can call  
someone in your mobile phonebook  
using your voice. You can also call  
someone in your phonebook by  
Quick guide to the SMS message  
reader  
USB/iPod MODE  
To activate USB/iPod mode, insert the  
respective device (USB stick or other  
device) in the USB port located in  
the glove compartment.  
selecting from the contacts that appear  
on the display of the instrument panel.  
(This function requires your phone  
directory to have been copied onto the  
car hands-free system).  
(only for mobile phones that support  
this function)  
If your Bluetooth® phone supports  
this function, when you receive a new  
SMS message, the system alerts you  
with an acoustic signal and asks you if  
you want to read it.  
If a USB/iPod device is inserted with  
the system on, this starts playing the  
tracks present on the device.  
203  
Say “Yes” or press the  
SRC/OK. The system will read the  
button or  
When the creation of the multimedia  
library is over, it is possible to use  
the system to display and select the  
tracks present and to activate playing.  
say one of the available options:  
"FOLDERS", "ARTISTS", "GENRES",  
"ALBUMS", "PLAYLIST";  
last message received;  
Say “NO” or press the  
/
select “PLAY ALL” and confirm with  
button. The system will store the  
message which you can read later, as  
long as the phone is connected to  
the system.  
SRC/OK;  
Managing the multimedia library  
select the item chosen and confirm  
with SRC/OK.  
With the MEDIA function you can select  
the digital audio on your USB device,  
using voice recognition or the steering  
wheel controls.  
Pause  
To get to know all the functions and  
ways of using the SMS message  
reader, refer to the "SMS MESSAGE  
READER FUNCTIONS" chapter.  
To pause the track you are listening to:  
Tracks may be selected by folder, artist,  
musical genre, album and playlist.  
Activate the Main Menu from the  
steering wheel controls on the  
instrument panel display, select the  
BROWSE USB option and then press  
SRC/OK.  
press the  
panel of the Uconnect Radio.  
button on the front  
To resume listening to a track that you  
have paused: press the  
MULTIMEDIA FUNCTIONS  
button  
on the front panel of the Uconnect  
Radio.  
The MEDIA menu allows you to view  
and reproduce the tracks stored on a  
USB/Bluetooth® AUDIO or AUX  
source (connected to the USB port).  
It is recommended to load only  
unprotected music files, with supported  
extensions. If the USB device contains  
other formats (e.g. .exe, .cab, .inf,  
etc.), problems might arise during  
playing of tracks.  
Stop  
Select one of the following items:  
FOLDERS  
ARTISTS  
GENRES  
ALBUMS  
To stop playing a track: say "Stop”.  
To resume, say “Play”.  
NOTE The “Play” command is only  
available if playback has been stopped  
using the “Stop” command.  
PLAYLIST  
and press SRC/OK.  
To connect your UBS device to the  
system, proceed as follows:  
Next track  
select “PLAY ALL” and confirm with  
Connect the device to the USB  
socket in the glove compartment;  
To skip to the next track, using manual  
interaction: while listening to a digital  
track, press (steering wheel controls)  
or (Uconnect Radio controls) (where  
present).  
SRC/OK;  
select the item chosen and confirm  
with SRC/OK;  
Turn the ignition key to MAR. The  
system will automatically start playing  
your digital tracks, selecting them from  
a library that is created the moment  
the USB device is connected.  
It is also possible to access the same  
functions with the voice commands:  
press the button on the steering  
wheel and say "BROWSE USB";  
204  

Related Topics

SERVICING AND CARE
SCHEDULED SERVICING ENGINE COMPARTMENT BRAKES WINDSCREEN / REAR WINDOW WIPERS LIFTING THE VEHICLE WHEELS AND TYRES BODYWORK INTERIOR

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot