Get MULTIMEDIA Guide for Fiat Panda SUV Fourth Generation (2024-2026)

MULTIMEDIA

TIPS, CONTROLS AND

GENERAL INFO ......................... 196

This section describes the main

functions of the Radio, Uconnect

Bluetooth and Uconnect Mobile

systems which can be fitted on the

vehicle.

RADIO - UCONNECT

BLUETOOTH............................. 198

UCONNECT MOBILE.................. 211

UCONNECT™ 5" ....................... 223

7” TOUCHSCREEN RADIO

(for versions/markets, where

provided)................................... 235

MOPAR® CONNECT.................. 247

OFFICIAL TYPE APPROVALS ...... 248

DASHBOARD (RIGHT-HAND

DRIVE VERSION)........................ 249

DASHBOARD AND

INSTRUMENT PANEL................. 250

WHEN PARKED......................... 251

195

Care and maintenance

Computer) is replaced, the device will

ask the user to enter the secret code

according to the procedure described

in the paragraph below.

TIPS, CONTROLS

AND GENERAL INFO

Observe the following precautions to

ensure the system is fully operational:

the display lens should not come into

contact with pointed or rigid objects

which could damage its surface; use a

soft, dry anti-static cloth to clean and

do not press.

do not use alcohol, petrol and

derived products them to clean the

display lens and make sure that the

190) 191) 192) 193) 194) 195) 196) 197) 198) 199)

The Radio, Uconnect Bluetooth and

Uconnect Mobile systems were

designed according to the specific

characteristics of the passenger

compartment, with a customised

design that perfectly matches the style

of the dashboard.

Entering the secret code

When the Radio and Uconnect

systems is switched on, if the

password is requested, the display

will show "Radio code" for about 2

seconds, followed by four dashes "- - -

-".

The instructions for use are given below

and we recommend you to read them

carefully.

TM

Uconnect

during cleaning.

system is switched off

The secret code is made up of four

digits from 1 to 6, each corresponding

to one of the dashes.

prevent any liquid from entering the

system: this could damage it beyond

repair.

TIPS

To enter the first digit of the code,

press the button corresponding to the

pre-selected stations (from 1 to 6).

Enter the other code digits in the same

way.

Familiarise yourself with the various

functions of the Radio and Uconnect

systems (for example, by storing the

stations) before starting to drive.

ANTITHEFT PROTECTION

The Radio and Uconnect systems are

equipped with an anti-theft protection

system based on an exchange of

information between them and the

electronic control unit (Body Computer)

on the vehicle.

If the four digits are not entered within

20 seconds, the display shows the text

"Enter code - - - -". If this occurs, it is

not considered an incorrect code entry.

After entering the fourth digit (within 20

seconds), Radio and Uconnect system

will start to operate.

Reception conditions

Reception conditions change

constantly while driving. Reception may

be interfered with by the presence

of mountains, buildings or bridges,

especially when you are far away from

the broadcaster.

This system guarantees maximum

safety and prevents the secret code

from being entered each time the Radio

and Unconnet system power supply is

disconnected.

If an incorrect code is entered, the

Radio and Uconnect system will emit

a sound and the display shows the text

"Radio blocked/wait" to notify the user

of the need to enter the correct code.

Each time the user enters an incorrect

code, the waiting time will gradually

increase (1 min, 2 min, 4 min, 8 min, 16

WARNING The volume may be

increased when receiving traffic

information and news.

If the check has a positive outcome,

the Radio and Uconnect systems

will start to operate, whereas if the

comparison codes are not the same

or if the electronic control unit (Body

196

min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)

up to a maximum of 24 hours.

information carefully before using the

system for the first time.

voice recognition functions included in the

system and address any errors.

194) Warning: looking at the system when

driving can divert attention from the road,

with the risk of accidents or other serious

consequences. Do not change system

settings or enter data non-verbally (using

the manual controls) while driving. Stop

the vehicle in a safe and legal manner

before carrying out these operations.

Adopting these precautions is important

since setting or changing some functions

might require the driver to be distracted

away from the road and remove his or her

hands from the steering wheel.

195) Voice commands: the system

functions can be carried out using only

voice commands. The use of voice

commands when driving allows you to

manage the system without taking your

hands off the steering wheel.

196) Looking at the display for a long time:

while driving, do not use any function that

requires looking at the display for a long

time. Pull over in a safe and legal manner

before attempting to access a function

of the system that requires prolonged

attention. Even occasional short glances

at the display may be hazardous if your

attention is diverted from driving at a

critical moment.

197) Setting the volume: do not turn the

volume up too high. Keep the volume at

a level where you can still hear outside

traffic and emergency signals while driving.

Driving while unable to hear these sounds

may cause an accident.

199) Danger of distraction: the functions

may require manual settings (not using

voice commands). Attempting to perform

such setup or insert data while driving

can seriously distract your attention and

could cause an accident or other serious

consequences. Stop the vehicle in a safe

and legal manner before carrying out these

operations.

The waiting time will be shown on

the display with the words "Radio

blocked/wait". After the text has

disappeared it is possible to start the

code entering procedure again.

WARNING

190) If the volume is too loud this could

be dangerous for the driver and for

passengers when driving in traffic. Always

adjust the volume so that you can still hear

background noises.

191) The use of some of the system's

features whilst driving can divert attention

away from the road, with the risk of

causing accidents or other serious

consequences; therefore they must only

be used when the driving conditions allow

and, where necessary, only when the

vehicle is stationary.

192) Read and follow these instructions:

before using your system, read and follow

all the safety information and instructions

in this manual. Failure to observe the

precautions found in this manual may

lead to an accident or other serious

consequences.

193) Keep the manual in the car: if it is

kept in the car, the manual will become

something quick and easy to consult for

those not familiar with the system. Ensure

that everyone has access to the manual

and reads the instructions and the safety

198) Using the voice recognition: the

voice recognition software is based on

a statistical process that is subject to

error. It is your responsibility to monitor

197

RADIO - UCONNECT BLUETOOTH

QUICK REFERENCE GUIDE

182

F1D1029

198

General functions

ꢀ

Button

Functions

Mode

Ignition

short button press

long button press

turn knob

Switching off

Volume adjustment

RADIO

Select radio source FM, AM

Select preset ranges

short cyclical button press

ABC – 1 2 3 4 5 6

Select Audio Bluetooth® (for versions/markets, where

provided), USB (for versions/markets, where provided)

MEDIA

short cyclical button press

Short button press

Activate Play/Pause for the Media source

Activate Mute for the Radio source

(Play/Pause)

Menu activation: short button press.

Adjustment type selection: press buttons

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER) (for versions/markets, where provided)

or

.

Value adjustment: press

or

buttons.

Menu activation: short button press.

Adjustment type selection: press buttons

MENU

Advanced functions adjustment

Value adjustment: press

or

buttons.

199

Radio functions

ꢀ

Button

Functions

Mode

Automatic search: press buttons

button down for fast forward).

Manual search: press buttons

down for fast forward).

or

(hold the

Radio station search:

Automatic search

Manual search

or

(hold the button

Store current radio station

Stored station recall

Long button press for memory preset from 1 to 6

Brief button press for memory preset from 1 to 6

1 2 3 4 5 6

USB functions

(for versions/markets, where provided)

ꢀ

Input

Function

USB socket for playing multimedia files on flash drive or connectable device.

200

CONTROLS ON THE STEERING WHEEL

Radio

183

F1D1031

201

Uconnect Bluetooth

184

F1D1077

202

ꢀ

Button

(*)

Functions

Enable/disable Audio Mute

Return to the previous menu mode function

Mode

/

Short button press

(*)

Enable/disable Audio Mute

Short button press

Button press

+

Increasing volume

–

Decreasing volume

Button press

SRC

Select sources: FM, AM, Audio Bluetooth® (*) and USB (*)

Button press

Radio: automatic search for the next tunable broadcaster -

USB (*) source: selecting the next track

Button press

Radio: automatic search for the previous tunable

broadcaster - USB (*) source: selecting the previous track

(*) For versions/markets where provided

203

Multimedia support function

ꢀ

Button

Functions

Accept an incoming phone call

End the phone call in progress

Reject an incoming phone call

Deactivate a voice recognition

Activate/deactivate Audio Mute

Interrupt the reading of an SMS message

Exit from the Main Menu of Bluetooth® (*)

Exit from a submenu and return to previous menu option

Exit from the current menu option without saving

/

(*)

Deactivate/reactivate the microphone during a phone conversation

Mute the volume of the call tone for incoming phone calls

(*)

Activate/deactivate Audio Mute

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Adjust the audio volume of all functions: hands-free, text message reader, multimedia supports, voice

messages, Radio, USB (*), depending on the active source

+/-

Scroll through Menu items on the panel

Select multimedia support tracks

Scroll through SMS messages in the list

(*)

Access to the radio menu displayed on the instrument panel

Confirm manually selected menu option

Select sources: FM, AM, AUDIO Bluetooth® (*) and USB (*)

Select the SMS message on the instrument panel

SRC/OK(*)

(*) For versions/markets where provided

The functions of the steering wheel controls are activated when the button is released.

204

to activate the Mute function. In the

Radio source, the word “MUTE” will

appear, associated with the active

GENERAL INFORMATION

The Radio and Uconnect Mobile

system has the following functions:

Radio section

USB section

(for versions/markets, where provided)

For the USB function, see the

description in the dedicated paragraph.

source. Press the

/

button on

the steering wheel again to deactivate

the Mute function (for versions/markets,

where provided).

PLL tuning with FM/AM frequency

bands;

FUNCTIONS AND

ADJUSTMENTS

Switching on

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AF: search selection for alternative

frequencies in RDS mode;

automatic/manual tuning into

stations;

Audio settings

The functions that can be selected

from the audio menu change

depending on the context: AM/FM/

USB (for versions/markets,

where provided)/Bluetooth® (for

versions/markets, where provided).

Press the AUDIO button briefly to

change the Audio functions. After the

AUDIO button is first pressed, the

display will show the bass level value

for the source activated at that time

(e.g. in FM mode the display will show

the wording "FM Bass +2"). Use the

Press the (ON/OFF) button briefly

to switch the Radio and Uconnect

Bluetooth system on.

If the Radio and Uconnect Bluetooth

system is switched on when the key is

removed from the ignition, it will switch

off automatically after about 20 minutes

(if this time has been set). After the

Radio and Uconnect Bluetooth system

has switched off automatically it can be

switched on for a further 20 minutes by

pressing the button (ON/OFF).

FM Multipath detector;

manual storing of 36 or 54 stations:

18 in the FM band (6 in FM-A, 6 in FM-

B and 6 in FM-C) and 18 in AM (6 in

AM-A, 6 in AM-B and 6 in AM-C);

SPEED VOLUME function:

automatic volume adjustment in

function of the speed of the vehicle;

automatic Stereo/Mono selection.

Audio section

Switching off

Long press on button (ON/OFF).

or

buttons to scroll through the

menu functions. To change the setting

Volume adjustment

To adjust the volume, turn the twist

of the function selected use the

buttons.

or

Mute function;

Soft-Mute function;

control

.

If the volume level is changed during

the transmission of traffic news, the

new setting will only be maintained until

the news is finished.

The current status of the selected

function appears on the display.

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

Bluetooth®

The functions managed by the Menu

are:

Mute function

BASS: adjustment of bass tones;

TREBLE: adjustment of high tones;

For the Bluetooth® function, see the

description in the dedicated paragraph.

Press /(Version the

/

button on the steering wheel (for

versions/markets, where provided)

205

BALANCE: right/left balance

adjustment;

FADER: front/back balance

adjustment (for versions/markets,

where provided);

LOUDNESS: activation/ deactivation

of the increase of bass and high tones;

EQUALISER: activation and selection

of factory-set equaliser levels;

MY EQ: customised equaliser

setting.

RADIO ON VOLUME: radio

maximum limit on/off.

RADIO OFF: switching-off mode.

SYSTEM RESET: this function is

used to restore all settings to their

preset factory values.

Preset buttons

The buttons numbered from 1 to 6

are used to set the following preset

stations:

18 in the FM band (6 in FM-A, 6 in

FM-B and 6 in FM-C);

18 in the AM band (6 in AM-A, 6 in

AM-B and 6 in AM-C).

NOTE Traffic information is enabled

only if tuned to the station broadcasting

the announcement.

To listen to a preset station, select the

desired frequency band with the RADIO

button, briefly press ABC button to

select the preset band (A, B or C), and

then briefly press the corresponding

preset button (from 1 to 6).

Press the button MENU again to exit

the Menu function.

NOTE AF SWITCHING, TRAFFIC

INFORMATION and REGIONAL MODE

adjustments are only possible on FM.

MENU

MENU button functions

Press the button MENU briefly to

activate the Menu function. Use the

or buttons to scroll through the

menu functions. To change the setting

By pressing the preset button for more

than 2 seconds, the tuned station

will be stored. The storing phase is

confirmed by an acoustic signal.

RADIO (Tuner)

To select the Radio function while

listening to another audio source,

briefly press the RADIO button several

times to select the desired band, FM or

AM.

of the function selected use the

buttons.

or

Automatic tuning

The functions managed by the Menu

are:

Briefly press the

or

button to

Once the Radio mode has been

activated, the display will show the

name (only RDS stations) and the

frequency of the selected radio station,

the frequency band selected (e.g. FMA)

and the preselect button number (e.g.

P1).

start the automatic tuning search for

the next station that can be received in

the selected direction.

AF SWITCHING: automatic

activation/ deactivation of the selection

of the station with the strongest signal

that transmits the same programme.

TRAFFIC INFORMATION:

activation/deactivation of traffic

information.

REGIONAL MODE regional

programmes (ON/OFF).

SPEED VOLUME: speed-dependent

automatic volume control.

Manual tuning

Select the desired frequency band and

then press the

and repeatedly to start to the search in

the desired direction. If the or

buttons are pressed longer, the fast

search will start and then stop when

the button is released.

or

button briefly

Each time the button is pressed,

the FM and AM bands are selected

cyclically.

206

is not guaranteed as it depends on the

device type/brand.

directory to have been copied onto the

vehicle hands-free system).

Accepting a call: you can accept an

incoming call by pressing the button

on the steering wheel.

USB MODE

(for versions/markets, where provided)

To activate USB mode, insert the

corresponding device (USB stick or

other device) into the USB port on the

front panel of the Radio and Uconnect

Bluetooth system. If a USB device is

inserted with the system on, it will start

playing the tracks found on the device.

NOTE The Radio and Uconnect

Bluetooth system may not support

some USB keys Mobile: in this case,

it will not automatically switch from

“Radio” operation to “Media” operation.

If the device used does not play, verify

its compatibility by selecting the Media

Function: a dedicated message will

appear on the Radio and Uconnect

Bluetooth system display.

NOTE For radio versions without

Bluetooth® connectivity, playback

via USB connection is not available

for Apple devices. Only conventional

battery recharging is provided for these

devices.

Rejecting a call: you can reject a call

with a long press of the button

the steering wheel.

on

NOTE The phonebook is only available

after you have completely downloaded

the contents of your phone to the radio

system (the phonebook is downloaded

not only when the phone is first paired

to the radios system, but also at every

new car key on (MAR) / key off (STOP)

if the contacts have been changed).

BLUETOOTH®

(for versions/markets, where provided)

Bluetooth® technology allows you

to use your mobile phone through the

car's hands-free system, without the

need for wires. A mobile phone with

Bluetooth® is required to use the

hands-free system. To consult the list

of compatible phones, see the site:

Text Message Reader

(available only with mobile phones that

support this function)

The hands-free function allows the

following operations to be performed:

Calling a telephone number by voice

command: you can dial a telephone

number by stating the numbers out

loud.

Calling someone in the phonebook

using voice commands: you can call

someone in your mobile phonebook

using your voice. You can also call

someone in your phonebook by

selecting from the contacts that appear

on the display of the instrument panel.

(This function requires your phone

The SMS message reader makes it

possible to:

WARNING After using a USB charging

port, we recommend disconnecting the

device (smartphone), always removing

the cable from the car socket first,

never from the device. Cables left

flying or connected incorrectly could

compromise correct recharging and/or

the USB socket condition.

Be informed, by means of a message

on the instrument panel display, of the

reception a new SMS message on

your mobile phone with Bluetooth®

technology; the number/name of the

sender is displayed and the system will

also ask whether to read the message

to you.

Manage the list of messages

received on your mobile phone only

during connection with the active

system.

NOTE The USB ports handle

data transmission from the Pen

Drive/Smartphone, etc. and slow

recharging of an external device, which

207

ARTISTS

GENRES

ALBUMS

PLAYLISTS

Quick guide to the SMS message

reader

WARNING Do not play test

audio/musical files since they could

damage the components installed in

the car.

(only for mobile phones that support

this function)

and press SRC/OK.

If your Bluetooth® phone supports

this function, when you receive a new

SMS message, the system alerts you

with an acoustic signal and asks you if

you want to read it.

select “PLAY ALL” and confirm with

SRC/OK (for versions/markets, where

provided);

select the item chosen and confirm

with SRC/OK (for versions/markets,

where provided);

To connect your UBS device to the

system, proceed as follows:

Connect the device to the USB port

on the front;

Say “Yes” or press the

button or

Turn the ignition key to MAR. The

system will automatically start playing

your digital tracks, selecting them from

a library that is created the moment the

USB device is connected.

SRC/OK (for versions/markets, where

provided). The system will read the last

message received;

It is also possible to access the same

functions with the voice commands:

press the button on the steering

Say “NO” or press the

/

wheel

and say "BROWSE USB";

button. The system will store the

message which you can read later, as

long as the phone is connected to

the system. To get to know all the

functions and ways of using the text

message reader, refer to the "Text

message reader functions" paragraph

in this section.

When the creation of the multimedia

library is over, it is possible to use the

system to display and select the tracks

present and to activate playing.

say one of the available options:

"FOLDERS", "ARTISTS", "GENRES",

"ALBUMS", "PLAYLISTS";

select “PLAY ALL” and confirm with

SRC/OK (for versions/markets, where

provided);

select the item chosen and confirm

with SRC/OK (for versions/markets,

where provided).

Managing the multimedia library

With the MEDIA function you can select

the digital audio on your USB device,

using voice recognition or the steering

wheel controls.

MULTIMEDIA FUNCTIONS

The MEDIA menu allows you to

view and play the tracks stored on a

USB/Audio Bluetooth® source (for

versions/markets, where provided).

It is recommended to load only

unprotected music files, with supported

extensions. If the USB device contains

other formats (e.g. .exe, .cab, .inf, etc.),

problems might arise during playing of

tracks.

Tracks may be selected by folder,

artist, musical genre, album and

playlist.

Pause

To pause the track you are listening

to: press the

panel of the Radio. To resume listening

to a track that you have paused: press

the

the Radio.

button on the front

Activate the Main Menu from the

steering wheel controls on the

instrument panel display, select the

BROWSE USB option and then press

SRC/OK (for versions/markets, where

provided).

button on the front panel of

Select one of the following items:

FOLDERS

208

not due to the radio, but depends on

the information sent by the phone.

Stop

To stop playing a track: say "Stop”. To

resume, say “Play”.

Voice procedure:

Press

at the end of the message, say

"Pairing".

and say “Settings”. Then,

BLUETOOTH® DEVICE

(for versions/markets, where provided)

NOTE the “Play” command is only

available if you paused playback using

the “Stop” command.

The system will show a PIN number

on the display to be used for pairing.

Using the search function of the

Bluetooth® devices of your phone,

search for the “Radio BT” device.

When prompted, enter the PIN code

displayed on the instrument panel

using your mobile phone keypad. If the

registration is successful, the system

will say "Connecting" and at the end

the display will show, as confirmation,

details of the mobile phone registered.

Once the device has been paired, if the

function is supported by the phone, the

system automatically asks to download

the phonebook onto the Radio.

NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of Bluetooth®

devices on the phone and make a new

pairing.

WARNINGS

Access to the phonebook copied

onto the system is possible only when

the mobile phone from which it has

been copied is connected.

The names stored on the SIM card or

in your mobile phone memory can be

transferred to the system in different

ways, depending on the model of

mobile phone.

Next track

To skip to the next track using manual

interaction: while listening to a digital

track, press

controls) or

(where provided).

(steering wheel

(front panel controls)

Previous track

To return to the previous track using

manual interaction: while listening to a

Getting to know the voice

commands

digital track, press

(steering wheel

When talking to the system, you can

always use the voice command "Help"

to obtain detailed instructions on the

voice commands available for each

interactive stage.

controls) or (front panel controls)

(where provided).

Change audio source

To change the active audio

source between Radio, USB (for

versions/markets, where provided),

Tuner, Audio Bluetooth® (for

versions/markets, where provided),

press the SRC/OK button (for

versions/markets, where provided) or

MEDIA on the front panel of the Radio,

or say "Select USB, Radio, Audio

Bluetooth® source".

Pairing a Bluetooth® device

NOTE Only do this when the car is

stationary.

To pair your mobile phone with the

system, proceed as follows.

Manual procedure:

Making a phone call

Activate the Main Menu by pressing

the MENU button;

select the SETTINGS option, then the

"Pairing" option.

Press the steering wheel control

and say “Call” and the name of the

contact in the phonebook.

NOTE While playing Bluetooth®

audio, there could be some incorrect

displays related to the phone. This is

209

If the name is recognised, the system

will display the information for the

contact on the display.

The system will ask you to confirm

your request. To make the call, say

"Yes"; otherwise, say "No".

VOICE COMMANDS

Global commands

SELECT MEDIA SOURCE;

SELECT RADIO SOURCE;

SELECT PHONE SOURCE;

CALL or DIAL;

Alternatively, it is possible to call a

number that is not in the phonebook by

saying the number one figure at a time.

READ MESSAGE;

SETTINGS;

HELP;

CANCEL;

REPEAT.

Managing an incoming call

When a call is received, the system will

display the caller's ID, where available.

The incoming call will be signalled by

your mobile phone's personalised

ringtones (the availability of this function

depends on the specific features of

your phone).

Phone commands

DIAL;

CALL (followed by name);

CALL (followed by number);

CALL BACK;

READ LAST.

Answering a call:

Audio Bluetooth®/USB Commands

(for versions/markets, where provided)

To answer the call, press

To end the call, press

than 1 second.

.

for more

PLAY;

PAUSE;

STOP.

To reject a call: press

To ignore a call and not hear

the ring tone, press (for

.

Radio

/

SELECT BAND “FM” or “AM”.

NOTE We recommend not directing

the central air vents towards the

microphone as the noise of the air on

the microphone (fig. 187) could worsen

voice command performance.

versions/markets, where provided).

Putting a phone call on HOLD

To place a call in progress on HOLD

and disable the microphone in order

to be able to talk without being heard

by the person you are talking to press

/ (for versions/markets, where

provided).

210

UCONNECT MOBILE

QUICK REFERENCE GUIDE

185

F1D1006

211

General functions

ꢀ

Button

Functions

Mode

Ignition

short button press

long button press

turn knob

Switching off

Volume adjustment

Select radio souce FM, AM, DAB (for versions/markets,

where provided)

RADIO

short cyclical button press

ABC – 1 2 3 4 5 6

Select preset ranges

short cyclical button press

MEDIA

Select Bluetooth® Audio, USB

Activate Play/Pause for the Media source

Activate Mute for the Radio source

Short button press

(Play/Pause)

Menu activation: short button press.

Adjustment type selection: press buttons

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER) (where provided)

or

.

Value adjustment: press

or

buttons.

Menu activation: short button press.

Adjustment type selection: press buttons

MENU

Advanced functions adjustment

Value adjustment: press

or

buttons.

212

Radio functions

ꢀ

Button

Functions

Mode

Automatic search: press buttons

button down for fast forward).

Manual search: press buttons

down for fast forward).

or

(hold the

Radio station search:

Automatic search

Manual search

or

(hold the button

Store current radio station

Stored station recall

Long button press for memory preset from 1 to 6

Brief button press for memory preset from 1 to 6

1 2 3 4 5 6

213

CONTROLS ON THE STEERING WHEEL

186

F1D1077

214

ꢀ

Button

Functions

Enable/disable Audio Mute

Return to the previous menu mode function

Mode

/

Short button press

+

Increasing volume

Button press

–

Decreasing volume

Select sources FM, AM, DAB (for versions/markets, where

provided), Bluetooth® Audio and USB

SRC

Button press

Radio: automatic search for the next tunable broadcaster -

USB source: selecting the next track

Radio: automatic search for the previous tunable

broadcaster - USB source: selecting the previous track

215

Multimedia support function

ꢀ

Button

Functions

Accept an incoming phone call

End the phone call in progress

Reject an incoming phone call

Deactivate a voice recognition

Activate/deactivate Audio Mute

Interrupt the reading of an SMS message

Exit from the Main Menu of Bluetooth®

Exit from a submenu and return to previous menu option

Exit from the current menu option without saving

/

Deactivate/reactivate the microphone during a phone conversation

Mute the volume of the call tone for incoming phone calls

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Adjust the audio volume of all functions: hands-free, text message reader, multimedia supports, voice

messages, Radio, USB, depending on the active source

+/-

Scroll through Menu items on the panel

Select multimedia support tracks

Scroll through SMS messages in the list

Access to the radio menu displayed on the instrument panel

Confirm manually selected menu option

Select sources: FM, AM, DAB (where provided), Bluetooth® AUDIO and USB

Select the SMS message on the instrument panel

SRC/OK

The functions of the steering wheel controls are activated when the button is released.

216

button on the steering wheel again to

deactivate the Mute function.

GENERAL INFORMATION

The Uconnect Mobile system has the

following functions:

USB section

For the USB function, see the

description in the dedicated paragraph.

Audio settings

Radio section

FUNCTIONS AND

ADJUSTMENTS

Switching on

The functions that can be selected

from the audio menu change

depending on the context: AM/FM

and DAB (where provided)/USB/

Bluetooth®.

PLL tuning with FM/AM/MW

frequency bands (where present);

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AF: search selection for alternative

frequencies in RDS mode;

Press the (ON/OFF) button briefly to

switch the Uconnect Mobile system.

If the Uconnect Mobile system comes

on when the key is removed from

the ignition device, it will switch off

automatically after about 20 minutes

(if this time has been set). After the

Uconnect Mobile system has switched

off automatically it can be switched on

for a further 20 minutes by pressing the

button (ON/OFF).

Press the AUDIO button briefly to

change the Audio functions. After the

AUDIO button is first pressed, the

display will show the bass level value

for the source activated at that time

(e.g. in FM mode the display will show

the wording "FM Bass +2"). Use the

automatic/manual tuning into

stations;

FM Multipath detector;

manual storing of 36 or 54 stations:

18 in the FM band (6 in FM-A, 6 in FM-

B and 6 in FM-C) and 18 in AM (6 in

AM-A, 6 in AM-B and 6 in AM-C) and

18 in DAB (where present);

SPEED VOLUME function:

automatic volume adjustment in

function of the speed of the vehicle;

automatic Stereo/Mono selection.

Audio section

Mute function;

Soft-Mute function;

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

Bluetooth®

For the Bluetooth® function, see the

description in the dedicated paragraph.

or buttons to scroll through the

menu functions. To change the setting

of the function selected use the

buttons.

or

Switching off

Long press on button (ON/OFF).

The current status of the selected

function appears on the display.

Volume adjustment

To adjust the volume, turn the twist

The functions managed by the Menu

are:

control

.

If the volume level is changed during

the transmission of traffic news, the

new setting will only be maintained until

the news is finished.

BASS: adjustment of bass tones;

TREBLE: adjustment of high tones;

BALANCE: right/left balance

adjustment;

FADER: front/back balance

adjustment (where provided);

LOUDNESS: activation/ deactivation

of the increase of bass and high tones;

Mute function

Press the

/

button on the

steering wheel to activate the Mute

function. In the Radio source, the word

“MUTE” will appear, associated with

the active source. Press the

/

217

EQUALISER: activation and selection

of factory-set equaliser levels;

MY EQ: customised equaliser

setting.

News flash, Program info, Spec event,

Sport report, Warning, Weather).

REGIONAL MODE: activation/

deactivation of regional programmes.

MP3 DISPLAY: MP3 display setting.

SPEED VOLUME: speed-dependent

automatic volume control.

RADIO ON VOLUME: maximum

radio volume limit activation/

deactivation.

Each time the button is pressed,

the FM, AM and DAB bands (where

present) are selected cyclically.

Preset buttons

MENU

The buttons numbered from 1 to 6

are used to set the following preset

stations:

MENU button functions

Press the button MENU briefly to

activate the Menu function. Use the

18 in the FM band (6 in FM-A, 6 in

FM-B and 6 in FM-C);

18 in the AM band (6 in AM-A, 6 in

AM-B and 6 in AM-C).

or

buttons to scroll through the

menu functions. To change the setting

RADIO OFF: off mode selection.

SYSTEM RESET: reset of factory

settings.

of the function selected use the

buttons.

or

To listen to a preset station, select the

desired frequency band with the RADIO

button, briefly press ABC button to

select the preset band (A, B or C), and

then briefly press the corresponding

preset button (from 1 to 6).

The functions managed by the Menu

are:

Press the button MENU again to exit

the Menu function.

AF SWITCHING: automatic

activation/ deactivation of the selection

of the station with the strongest signal

that transmits the same programme.

NOTE FM following in DAB (where

provided; the radio switches

automatically to FM in case of low

DAB signal and back to DAB as soon

as the signal is available) is enabled by

enabling AF.

NOTE AF SWITCHING, TRAFFIC

INFORMATION and REGIONAL MODE

adjustments are only possible on FM.

By pressing the preset button for more

than 2 seconds, the tuned station

will be stored. The storing phase is

confirmed by an acoustic signal.

RADIO (Tuner)

To select the Radio function while

listening to another audio source,

briefly press the RADIO button several

times to select the desired band, FM

AM or DAB (where present).

Automatic tuning

Briefly press the

or

button to

start the automatic tuning search for

the next station that can be received in

the selected direction.

Once the Radio mode has been

activated, the display will show the

name (only RDS stations) and the

frequency of the selected radio station,

the frequency band selected (e.g. FMA)

and the preselect button number (e.g.

P1).

TRAFFIC INFORMATION:

activation/deactivation of traffic

information.

Manual tuning

Select the desired frequency band and

NOTE Traffic information is enabled

only if tuned to the station broadcasting

the announcement.

then press the

and repeatedly to start to the search in

the desired direction. If the or

buttons are pressed longer, the fast

or

button briefly

DAB INFO CATEGORIES (only

enabled for DAB sources): single

category enable/disable (Financial,

218

search will start and then stop when

the button is released.

directory to have been copied onto the

vehicle hands-free system).

compromise correct recharging and/or

the USB socket condition.

Accepting a call: you can accept an

incoming call by pressing the button

on the steering wheel.

NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided.

NOTE The USB ports handle

data transmission from the Pen

Drive/Smartphone, etc. and slow

recharging of an external device, which

is not guaranteed as it depends on the

device type/brand.

Rejecting a call: you can reject a call

with a long press of the button

the steering wheel.

on

USB MODE

Text Message Reader

(available only with mobile phones that

support this function)

To activate USB mode, insert the

corresponding device (USB stick or

other device) into the USB port on the

car dashboard. If a USB device is

inserted with the system on, it will start

playing the tracks found on the device.

NOTE The Uconnect Mobile system

may not support some USB keys

Mobile: in this case, it will not

automatically switch from “Radio”

operation to “Media” operation. If the

device used does not play, verify its

compatibility by selecting the Media

Function: a dedicated message will

appear on the Uconnect Mobile system

display.

BLUETOOTH®

Bluetooth® technology allows you

to use your mobile phone through the

car's hands-free system, without the

need for wires. A mobile phone with

Bluetooth® is required to use the

hands-free system. To consult the list

of compatible phones, see the site:

The SMS message reader makes it

possible to:

Be informed, by means of a message

on the instrument panel display, of the

reception a new SMS message on

your mobile phone with Bluetooth®

technology; the number/name of the

sender is displayed and the system will

also ask whether to read the message

to you.

Manage the list of messages

received on your mobile phone only

during connection with the active

system.

The hands-free function allows the

following operations to be performed:

Calling a telephone number by voice

command: you can dial a telephone

number by stating the numbers out

loud.

Calling someone in the phonebook

using voice commands: you can call

someone in your mobile phonebook

using your voice. You can also call

someone in your phonebook by

selecting from the contacts that appear

on the display of the instrument panel.

(This function requires your phone

Quick guide to the SMS message

reader

WARNING After using a USB charging

port, we recommend disconnecting the

device (smartphone), always removing

the cable from the car socket first,

never from the device. Cables left

flying or connected incorrectly could

(only for mobile phones that support

this function)

If your Bluetooth® phone supports

this function, when you receive a new

SMS message, the system alerts you

219

with an acoustic signal and asks you if

you want to read it.

select the item chosen and confirm

with SRC/OK;

on the dashboard;

Turn the ignition key to MAR. The

system will automatically start playing

your digital tracks, selecting them from

a library that is created the moment the

USB device is connected.

It is also possible to access the same

functions with the voice commands:

press the button on the steering

Say “Yes” or press the button

SRC/OK. The system will read the last

or

message received;

Say “NO” or press the

/

wheel

and say "BROWSE USB";

When the creation of the multimedia

library is over, it is possible to use the

system to display and select the tracks

present and to activate playing.

button. The system will store the

message which you can read later, as

long as the phone is connected to

the system. To get to know all the

functions and ways of using the text

message reader, refer to the "Text

message reader functions" paragraph

in this section.

say one of the available options:

"FOLDERS", "ARTISTS", "GENRES",

"ALBUMS", "PLAYLISTS";

select “PLAY ALL” and confirm with

SRC/OK;

Managing the multimedia library

With the MEDIA function you can select

the digital audio on your USB device,

using voice recognition or the steering

wheel controls.

select the item chosen and confirm

with SRC/OK.

Pause

To pause the track you are listening

MULTIMEDIA FUNCTIONS

The MEDIA menu allows you to

view and play the tracks stored on a

USB/Audio Bluetooth® source.

It is recommended to load only

unprotected music files, with supported

extensions. If the USB device contains

other formats (e.g. .exe, .cab, .inf, etc.),

problems might arise during playing of

tracks.

Tracks may be selected by folder,

artist, musical genre, album and

playlist.

to: press the button

on the front

panel of the Uconnect Mobile system.

To resume listening to a track that you

Activate the Main Menu from the

steering wheel controls on the

instrument panel display, select the

BROWSE USB option and then press

SRC/OK.

have paused: press the

button on

the front panel of the Uconnect Mobile

system.

Stop

To stop playing a track: say "Stop”. To

resume, say “Play”.

Select one of the following items:

FOLDERS

ARTISTS

GENRES

ALBUMS

PLAYLISTS

and press SRC/OK.

select “PLAY ALL” and confirm with

SRC/OK;

NOTE the “Play” command is only

available if you paused playback using

the “Stop” command.

WARNING Do not play test

audio/musical files since they could

damage the components installed in

the car.

Next track

To skip to the next track using manual

interaction: while listening to a digital

To connect your UBS device to the

system, proceed as follows:

track, press

controls) or

(steering wheel

(Uconnect Mobile

Connect the device to the USB port

220

ways, depending on the model of

mobile phone.

the display will show, as confirmation,

details of the mobile phone registered.

Once the device has been paired, if the

function is supported by the phone, the

system automatically asks to download

the phonebook onto the Uconnect

Mobile system.

system controls) (for versions/markets,

where provided).

Getting to know the voice

commands

Previous track

To return to the previous track using

manual interaction: while listening to a

When talking to the system, you can

always use the voice command "Help"

to obtain detailed instructions on the

voice commands available for each

interactive stage.

digital track, press

(steering wheel

controls) or (Uconnect Mobile

system controls) (for versions/markets,

where provided).

NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of Bluetooth®

devices on the phone and make a new

pairing.

Pairing a Bluetooth® device

NOTE Only do this when the car is

stationary.

Change audio source

To change the active audio source

(Radio, USB, Tuner, Bluetooth®

Audio) press the SRC/OK or MEDIA

button on the front panel of the

Uconnect Mobile system, or, using

voice interaction: say "Select source

USB, Radio, Bluetooth® Audio".

NOTE While playing Bluetooth®

audio, there could be some incorrect

displays related to the phone. This is

not due to the radio, but depends on

the information sent by the phone.

To pair your mobile phone with the

system, proceed as follows.

Manual procedure:

Making a phone call

Activate the Main Menu by pressing

the MENU button;

select the SETTINGS option, then the

"Pairing" option.

Voice procedure:

Press the steering wheel control

and say “Call” and the name of the

contact in the phonebook.

If the name is recognised, the system

will display the information for the

contact on the display.

The system will ask you to confirm

your request. To make the call, say

"Yes"; otherwise, say "No".

Press

and say “Settings”. Then,

at the end of the message, say

"Pairing".

BLUETOOTH® DEVICE

WARNINGS

The system will show a PIN number

on the display to be used for pairing.

Using the search function of the

Bluetooth® devices of your phone,

search for the “Radio BT” device.

When prompted, enter the PIN code

displayed on the instrument panel

using your mobile phone keypad. If the

registration is successful, the system

will say "Connecting" and at the end

Alternatively, it is possible to call a

number that is not in the phonebook by

saying the number one figure at a time.

Access to the phonebook copied

onto the system is possible only when

the mobile phone from which it has

been copied is connected.

The names stored on the SIM card or

in your mobile phone memory can be

transferred to the system in different

Managing an incoming call

When a call is received, the system will

display the caller's ID, where available.

The incoming call will be signalled by

your mobile phone's personalised

221

chapter. For the list of compatible

phones, see Fiat eLum site.

ringtones (the availability of this function

depends on the specific features of

your phone).

CALL (followed by number);

CALL BACK;

READ LAST.

The app interface may change

depending on how it is used:

connected or not connected to the car

radio.

Answering a call:

Audio Bluetooth®/USB Commands

PLAY;

PAUSE;

STOP.

To answer the call, press

To end the call, press

than 1 second.

.

for more

When it is connected via Bluetooth®,

you can interact with the radio through

the screen of your smartphone. You

can listen to you favourite music by

selecting the source, the track or the

radio station desired. You can also view

the phonebook, your car handbook

and, if necessary, call for assistance.

When not connected, you can get

information about the status of your car

with my:Car. You can also find your car

easily if you do not remember where

you parked it.

To reject a call: press

To ignore a call and not hear the ring

tone, press

.

Radio

SELECT BAND “FM” “AM” or “DAB”.

NOTE We recommend not directing

the central air vents towards the

microphone as the noise of the air on

the microphone (fig. 187) could worsen

voice command performance.

/

.

Putting a phone call on HOLD

To place a call in progress on HOLD

and disable the microphone in order to

be able to talk without being heard by

the person you are talking to press

/

.

VOICE COMMANDS

Global commands

SELECT MEDIA SOURCE;

SELECT RADIO SOURCE;

SELECT PHONE SOURCE;

CALL or DIAL;

READ MESSAGE;

SETTINGS;

HELP;

CANCEL;

REPEAT.

187

F1D0999

PANDA UCONNECT APP

To use the Panda Uconnect app you

must download it from the Apple

App Store or from Google Play and

pair the smartphone to the radio via

Bluetooth®, as described in the

"Bluetooth® Device” paragraph in this

Phone commands

DIAL;

CALL (followed by name);

222

UCONNECT™ 5"

CONTROLS ON FRONT PANEL

(except 1.0 FireFly Hybrid 70 HP versions)

188

F1D1092

223

(for 1.0 FireFly Hybrid 70 HP versions)

189

F1D1093

224

FRONT CONTROL PANEL SUMMARY TABLE

ꢀ

Button

Functions

Mode

Brief button press

Source selection: AM, FM, DAB (where provided)

Source selection: USB, Bluetooth® audio

Brief button press

Switching the system on

Switching the system off

Brief button press

Long button press

VOL

Volume activation/deactivation (Mute) (for 1.0 FireFly Hybrid 70 HP

versions)

Brief button press

Volume adjustment

Left/right rotation of knob

Brief button press

Volume activation/deactivation (Mute) (where provided)

Activation/deactivation of Play (playback) / Pause function

Brief button press

Radio source: Select the radio station stored under "Preset 1"

Media source: On/Off random playback of tracks in the device

Brief button press

Long button press

Brief button press

1

2

Radio source: Store the radio station currently playing under "Preset

1"

Radio source: Select the radio station stored under "Preset 2"

Media Mode: Select the previous track

Radio source: Store the radio station currently playing under "Preset

2"

Media Source: Fast backward track playback

Long button press

USB port

–

225

Button

3

Functions

Mode

Brief button press

Radio source: Select the radio station stored under "Preset 3"

Media source: Select the next track

Radio source: Store the radio station under "Preset 3"

Media source: Activate quick search function

Long button press

Brief button press

Access to hybrid system screens (where provided)

Radio source: Select the radio station stored under "Preset 4"

Media source: On/Off repeat tracks in USB device

4

Radio source: Store the radio station currently playing under "Preset

4"

Long button press

Brief button press

Access the settings menu

Confirmation of the option displayed

Open browsing list (Radio or Media mode)

Scrolling the list or tuning to a radio station

Display list of stations (Radio mode)

Scroll contents of sources (Media mode)

Media source track change

BROWSE ENTER

Left/right rotation of knob

Station change (RADIO mode)

Exit the selection/return to previous screen

Brief button press

Phone mode selection and acceptance of incoming phone call

Acceptance of the second incoming call and putting the active call

on hold

Rejection of incoming call

Ending of call in progress

Brief button press

226

CONTROLS ON THE STEERING WHEEL

(where provided)

The controls for the main system functions are present on the steering wheel to make control easier.

The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as

described in the table below.

190

F1D1078

227

RADIO FUNCTION

ꢀ

Button

Functions

Acceptance of incoming call

Acceptance of the second incoming call and putting the active call on hold

End the phone call in progress

Reject an incoming phone call

Activate/deactivate Audio Mute

Brief press: activation of the voice assistant or interruption of the voice message in order to give a new

voice command

Long press: activate voice command recognition or close voice recognition if session is already active

+/-

Adjustment of audio volume

In Radio source: search next/previous radio station

Media Mode: select the next/previous track

/

In the radio source: Scroll presets

®

Press: each press scrolls through the sources FM, AM, DAB (where provided), USB, Bluetooth

AUDIO.

SRC

The functions of the steering wheel controls are activated when the button is released.

228

CONTROLS BEHIND THE STEERING WHEEL

ꢀ

Buttons

Interaction

Button 1 (steering wheel left side)

Brief button press: search for next radio station or selection of USB next track.

Long button press: scan of higher frequencies until released/fast forward of USB

track.

Upper button

Central button

With each press it scrolls through the DAB sources (where provided) FM, AM, USB, BT

AUDIO

Only the available sources will be selected.

Brief button press: search for next radio station or select USB previous track.

Long button press: scan of lower frequencies until released/fast forward of USB track.

Lower button

Button 2 (steering wheel right side)

Increasing volume

Brief button press: single volume increase

Long button press: fast volume increase

Upper button

Central button

Lower button

Activation/deactivation of Mute function

Decreasing volume

Brief button press: single volume decrease

Long button press: fast volume decrease

229

SYSTEM ON / OFF

The system is switched on by briefly

pressing the VOL button/knob on the

front panel.

In the lower part: display additional

information (if available) of the radio

station you are listening to.

"Preset": this displays the list of

stored presets

"Available Stations": this displays the

list of available DAB stations

"Genres": to search for a category

by choosing from the various available

genres

FM station list

Press the BROWSE ENTER

button/knob to display the complete list

of the FM stations that can be received.

The system is switched off by long

pressing the VOL button/knob on the

front panel.

RADIO STATION

RADIO MODE SELECTION

SETTING THE PRESETS

The preset stations are available in all

system modes and are selected by

touching one of the presetting buttons

1-2-3-4 on the front panel.

ALPHABETIC SELECTION

Using the "ABC" function, you can,

according to the selected letter,

position yourself alphabetically on the

first of the available FM or DAB (for

versions/markets, where provided)

stations for that letter.

To activate Radio mode, press the

button on the front panel: the display

will show the active frequency mode

(AM, FM or DAB - for versions/markets,

where provided).

If you are tuned to a radio station

that you wish to store, hold down

the button on the display which

corresponds to the desired preset.

SELECTING A

FREQUENCY BAND

PREVIOUS / NEXT RADIO

STATION SEARCH

Briefly press the button

on the front

RADIO STATION

SELECTION

panel to select the desired frequency

band.

Briefly press buttons 2

or 3

on

the front panel. The radio station of the

previous or next preset is displayed

when the button is released.

To search for the desired radio station

as follows:

INFORMATION ON THE

DISPLAY

press the BROWSE/ENTER

button/knob to access the radio menu

select "Available stations"

turn the BROWSE ENTER

button/knob clockwise or anticlockwise

press the BROWSE ENTER

button/knob to confirm

After the desired radio station is

selected, the following information is

shown on the display:

MEDIA MODE

A dedicated messages will appear

on the display if no Media device

is connected to the system or if

the connected Media source is not

recognised by the system.

In the upper part: currently selected

frequency band display (AM, FM or

DAB - for versions/markets, where

provided).

CHANGE TRACK

(next/previous)

Selecting a DAB radio category

To select one of the DAB radio

categories activate the "Browse" menu

for the DAB function and then select

one of the following options:

In the central part: display name (if

available), frequency and storage

number (within the list of favourite radio

stations) of the listening radio station.

Turn the BROWSE ENTER button/knob

clockwise to play the next track turn

the BROWSE ENTER button/knob

230

anticlockwise to go back to the

beginning of the selected track or to

the beginning of the previous track if

the current one has been playing for

less than 3 seconds.

USB MODE

PHONE MODE

Phone mode activation

To activate the USB mode, insert a

USB flash drive into the USB port on

the front panel. The display will show

the first track available in play.

Press the BROWSE/ENTER button to

open the following:

To activate Phone mode, register

your phone to the system using

®

Bluetooth .

NOTE The BROWSE/ENTER knob

is not supported by Apple devices

connected via USB.

The following options will appear on the

display:

All tracks

Artists

Albums

Genres

Playlists

"Browse": to view the list of

"Contacts", "Recent Calls" and the

graphic keypad on the system display

"Settings": to access the "Settings"

menu for Phone Mode

Press 3

next track.

(short press) to play the

Press 2 (short press) to play the

previous song.

Podcasts (Apple devices only)

Audiobooks (for Apple devices only)

Folders

Turn the BROWSE ENTER button/knob

to select the desired option and then

press the button/knob to confirm the

selection.

SONG FAST FORWARD

Long press button 3

the selected song.

to fast-forward

Turn the BROWSE ENTER button/knob

to select the desired option and then

press the button/knob to confirm the

selection.

Long press button 2 to quickly

reverse the selected song.

Pairing a mobile phone

WARNING Carry out this operation only

with vehicle stationary and in safety

conditions; this function is deactivated

when the vehicle is moving.

SHUFFLE

NOTE If you insert a USB flash drive

into the port on the front panel, if the

"Autoplay" function is ON, all files in all

folders will be played automatically.

WARNING After using a USB

recharging socket, we recommend

disconnecting the device, always

removing the cable from the vehicle

socket first, never from the device.

Cables left flying or connected

incorrectly could compromise correct

recharging and/or the USB socket

condition.

Press button 1 on the front

panel to play the tracks on USB or

®

Bluetooth in a random order.

The pairing procedure for a mobile

phone is described below: always

consult the handbook for the mobile

phone in any case.

REPEAT

Press button 4

function.

to activate the

The following functions are available:

"Repeat all": repeat all tracks

"Repeat one": repeat the single track

"Repeat off": deactivate the function

Access the “Settings” menu of the

phone

Turn the BROWSE ENTER

button/knob to select the "Pair new

phone" option: a dedicated screen will

appear on the display

231

The "Settings" Menu can be accessed

by selecting the "Settings" button in

the "Phone" Menu, or by pressing the

"OK" button in the "Phone" Main Menu

(when no mobile phone is connected).

After selecting it, the "Pair new phone"

pairing procedure will start if the vehicle

speed is below the maximum permitted

threshold.

The driver will be prompted whether

to download the phonebook or not.

If the connected device has "Siri" or

another Voice Assistant function, the

corresponding icon will appear on the

system display.

Press the BROWSE/ENTER

button/knob to confirm the selection: a

dedicated message will appear on the

display

Unpairing of a Bluetooth® mobile

phone

NOTE The priority is determined

according to the order of connection.

The first connected phone will have the

highest priority and will be the first

device displayed on the list.

To disconnect a specific mobile phone

or Bluetooth® audio device, proceed

as follows:

If the vehicle speed exceeds this

threshold, the message "Function not

available while vehicle is moving" will

appear on the display.

Access the “Settings” menu of the

phone

Pairing a Bluetooth® audio device

The pairing procedure of an audio

device is performed by pressing the

PHONE button on the front panel and

selecting "Settings". The display will

show information (if available) about

the connected device, the pairing was

successful.

Turn the BROWSE ENTER

button/knob and select the "Delete"

Press the BROWSE/ENTER

button/knob to confirm the selection: a

dedicated message will appear on the

display

If the pairing process can start when

"Pair new phone" is selected pop-up

screen indicating the device name and

a random 4-digit PIN will appear on the

display.

Making a phone call

A call can be made by:

When the vehicle name is selected, and

if the 4-digit PIN has been entered

correctly in the device, a pop-up

message will appear on the display to

start the procedure.

Pairing of a Bluetooth® mobile

phone

Select a contact in the phonebook

and then select "OK" and press

BROWSE/ENTER to start the call

By dialling a phone number using the

graphic keypad on the display and then

selecting the "Call" option

With the mobile phone and continue

using the system (never allow yourself

to be distracted while driving). When

a phone number is dialled with the

keypad of the mobile phone, the audio

of the call is played over your vehicle's

sound system

The system connects automatically

to the paired mobile phone with the

highest priority.

The 6-digit confirmation screen

automatically replaces the previous one

and driver confirmation is required on

both the device and the system. Once

the PIN has been confirmed, both on

the system and the paired device,

the pairing procedure will start. If the

pairing procedure is successful, the

new device is recorded and connected

as audio and phone mode.

To select a mobile phone or a specific

Bluetooth® audio device, proceed as

follows:

Access the “Settings” menu of the

phone

Turn the BROWSE ENTER

button/knob and select the "Connect"

option

232

use the function once this has been

done.

Answering a call

"Audio"

"System"

"Radio"

To answer the incoming call, press the

PHONE button on the front panel or

on the steering wheel controls.

Voice assistant

(only available with Android compatible

mobile phones)

Audio

The following adjustments can be

carried out using the "Audio" menu:

"Bass"

“Mid”

"Treble"

"Balance"

"Fade" (only available with rear

speakers)

“Loudness” (where provided)

"Speed-dependant volume"

"Volume limits at startup"

Ending a call

The "Voice Assistant" function can be

used to use your voice to send text

messages, play the content of the

device, make phone calls and much

more. "Voice Assistant" understands

and replies in natural language and

interacts with requests.

To end a call, press the

the front panel or on the steering wheel

controls.

button on

Siri Eyes Free

(available only with iPhone 4S and

subsequent versions and compatible

iOS versions)

Proceed as follows to interact with

Voice Assistant:

The "Siri" function can be used to use

your voice to send text messages, play

the content of the device, make phone

calls and much more. Siri understands

and replies in natural language and

interacts with requests.

Pair the "Voice Assistant" enabled

device with the UConnect™ system

System

Press the

button on the steering

The following adjustments can be

carried out using the "System" menu:

"Auto-on"

"Radio Off Delay"

"Autoplay"

wheel controls (long press). The system

is ready and you can interact with

"Voice Assistant" to give the desired

commands

Proceed as follows to interact with

"Siri":

Pair the "Siri" enabled device with the

UConnect™ system

NOTE The first time the “Voice

Assistant” function is activated, it is

necessary to press and release the

button on the steering wheel controls

and switch off the UConnect™ system

for a few minutes. You will be able to

use the function once this has been

done.

"Restore Default"

"Clear Personal Data"

Press and release the button

on

the steering wheel. When you hear the

double beep, the system is ready and

you can interact with "Siri" to impart the

desired commands

HYBRID SYSTEM

SCREENS

(for versions/markets, where provided)

ENERGY FLOWS

NOTE The first time the “Voice

The following screens indicate the

hybrid system usage mode in real time

by showing the energy flow to and from

the auxiliary battery and electric motor

in different colours.

Assistant” function is activated, it is

necessary to press and release the

button on the steering wheel controls

and switch off the UConnect™ system

for a few minutes. You will be able to

SETTINGS

Press the

button on the front

panel to display the "Settings" menu, .

The menu includes the following items:

233

The different types of display are

described in detail below:

ENERGY CONSUMPTION

The diagram fig. 194 gives a real-time

view of the power provided by the

auxiliary battery during acceleration

(light blue bars) and the power

accumulated during deceleration

(green bars, the brightness of which

is proportional to how flat the battery

is and may vary with the battery

temperature condition).

Drivingwith only the heat engine:

white arrows (A) fig. 191 pointing in the

direction of travel, the heat engine (B)

and red wheels indicate that the power

produced by the heat engine is being

used

192

F1D1079

Charging the ancillary battery: the

white arrows (A) fig. 193 towards the

vehicle, the electric motor, the wheels

and the ancillary battery (D) green

arrows indicate that the ancillary battery

is being charged

191

F1D1080

194

F1D1082

Assistance from the electric

motor to the heat engine: white

arrows (A) fig. 192 facing in the

direction of travel, the heat engine in

red, the electric motor in blue and the

red/blue wheels indicate that you are

using power from the heat engine (C)

and the red/blue wheels indicate that

the power produced by the heat engine

is being used

193

F1D1081

NOTE The more coloured bars on the

auxiliary battery, the greater the battery

charge state.

234

7” TOUCHSCREEN RADIO (for versions/markets, where provided)

CONTROLS ON FRONT PANEL

195

F1D1000

235

CONTROLS ON THE DASHBOARD

ꢀ

Button

Functions

Mode

On/off

Brief button press

/ VOLUME

Volume adjustment

Left/right rotation of knob

Brief button press

Volume activation/deactivation (Mute/Pause)

Confirmation of the option displayed

Open browsing list (Radio or Media mode)

Brief button press

Scrolling the list or tuning to a radio station

Display list of stations (Radio mode)

Scroll contents of sources (Media mode)

Media source track change

TUNE SCROLL /

BROWSE ENTER

Left/right rotation of knob

Station change (RADIO mode)

236

GRAPHIC BUTTONS ON DISPLAY

ꢀ

Graphic button

Functions

Mode

Press graphic button

Radio

Media

Phone

Access to the Radio mode

Source selection: USB, Bluetooth®

Press graphic button

Access to the Phone mode

Access to the additional functions (display of Time,

Compass, Media Player and App/Services installed

in the car)

Apps

Press graphic button

Compass

Settings

Audio

Viewing compass information

Access the settings menu

Press graphic button

Access the Audio settings menu

237

STEERING WHEEL CONTROLS

(where provided)

The controls for the main system functions are present on the steering wheel to make control easier. The activation of the

function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in the table

below.

196

F1D1001

238

STEERING WHEEL CONTROLS SUMMARY TABLE

ꢀ

Button

Interaction

Acceptance of incoming call

Acceptance of the second incoming call and putting the active call on hold

IMPORTANT: the voice commands only serve to interact with the voice assistance (Siri Eyes Free or Google Assistant).

For Apple devices, it is possible to interact with mobile devices connected via either Bluetooth or USB, while a USB

connection is required for Android devices.

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Interruption of voice recognition

Note: if, by pressing the button, the conditions for activating interaction with Siri or the Google Assistant are not met,

the system will indicate the correct conditions of use by means of a pop-up on the display.

Rejection of incoming call

Ending of call in progress

Radio preset scroll (only in Radio mode)

Short press: volume on/off (Mute/Pause)

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB, Bluetooth® mode): selection of previous/next track

Long press (USB, Bluetooth® mode): fast forward/rewind until released

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

+/-

SRC

Audio source selection: FM, AM, DAB (for versions/markets, where provided), Bluetooth® and USB

239

corresponding to the selected band is

highlighted).

TOUCHSCREEN

FUNCTION

"Equalizer" (where provided)

“Speed Adj Volume” (speed-

dependent automatic volume control)

“Loudness” (where provided)

"AutoPlay"

The system uses the touchscreen

function; to interact with the different

functions, press the graphic buttons

displayed.

NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided.

On the right side: “Info” graphic

button display: additional information

on the source being played.

At the bottom: display of the following

buttons:

"Auto-On Radio"

To confirm a selection, press the "OK"

graphic button.

MEDIA MODE

Press the "Select Source" graphic

button to select the desired audio

source from those available: USB and

Bluetooth®.

To go back to the previous screen,

press the (Delete) button or,

depending on the active screen,

Done.

/

RADIO (TUNER) MODE

The system is switched on/off by

pressing the (ON/OFF) button/knob.

Turn the button/knob clockwise

to increase the radio volume or

anticlockwise to decrease it.

WARNING Applications used

on portable devices may be not

compatible with the Uconnect™

system.

"Browse": list of the radio stations

available;

/ : selecting previous/next

radio station

"Tune" : manual radio station tuning

“Audio”: access to the “Audio

Settings” screen

After Media mode is selected, the

following information is shown on the

display:

The system is equipped with the

following tuners: AM, FM and DAB (for

versions/markets, where provided).

After the desired radio station is

selected, the following information is

shown on the display:

Audio menu

At the top: information on the track

being played and the following graphic

buttons:

To access the "Audio" menu press the

Audio" button located at the bottom of

the display.

"Repeat Song", "Repeat All" or

"Repeat Off": repeat the current song,

all songs or turn the function off

“Shuffle”: to play the tracks in

random order

Track progress and duration

In the middle: information on the track

being played.

Pressing the “Audio” button

automatically accesses the “Settings”

menu from which it is possible to make

the desired adjustments.

At the top: display of the stored radio

station (preset) list. The station being

listened to is highlighted.

At the centre: the name of station

being listened too is displayed.

On the left side: displays the “AM”,

“FM”, “DAB” (where provided) graphic

buttons for selecting the desired

frequency band (the graphic button

The following adjustments can be

carried out using the "Audio" menu:

"Balance" (left/right and front/rear

sound balance adjustment)

On the left: display of the following

buttons:

240

on the information present on the

tracks.

Selected device or audio source

“Select Source”: select the required

audio source

search for Uconnect™ on the

Bluetooth® audio device (during the

pairing stage a screen is displayed

showing the progress of the operation)

when requested by the audio device,

enter the PIN code shown on the

system display or confirm on the device

the PIN displayed

if the pairing procedure is completed

successfully, a screen is displayed.

Answer “Yes” to the question to pair

the Bluetooth® audio device as

favourite (the device will have priority

over all other devices to be paired

subsequently). If "No" is selected, the

priority is determined according to the

order of connection. The last device

connected will have the highest priority

an audio device can also be

NOTE This button might be disabled for

some Apple® devices

On the right: display of the following

buttons:

Press the "Tracks" graphic button to

activate this function on the source

being played.

"Info": additional information about

the track playing

“Tracks”: list of available tracks

At the bottom: information on the

track being played and the following

graphic buttons:

Turn the TUNE SCROLL button/knob

to select the desired category and then

press the button/knob to confirm the

selection.

“Bluetooth”: for a Bluetooth® audio

source, opens the list of devices

"Browse" for a USB source, opens

browsing

NOTE The indexing time of a USB

device can vary depending on the

media inserted (in some cases it can

take a few minutes).

/

selection

: previous/next track

BLUETOOTH® SOURCE

This mode is activated by pairing a

Bluetooth® device containing music

tracks with the system.

: pause track being played

“Audio”: access to the “Audio

Settings” screen

paired by pressing the "Phone"

graphic button on the display and

by selecting "Settings" or selecting

"Phone/Bluetooth" from the "Settings"

menu.

PAIRING A BLUETOOTH®

AUDIO DEVICE

To pair a Bluetooth® audio device,

proceed as follows:

Track selection

The “Tracks” function allows you to

open a window with the list of tracks

being played.

activate the Bluetooth® function on

the device

press the "Media" graphic button on

the display

press the "Select Source" graphic

button

With the TUNE SCROLL button/knob

you can browse the list of artists,

genres, etc...

WARNING If the Bluetooth®

connection between mobile phone

and system is lost, consult the mobile

phone handbook.

The choices available depend on the

device connected.

For example, on a USB device you can

also scroll through the list of artists,

genres and albums available depending

select the Bluetooth® Media source

press the "Add Device" graphic

button

NOTE The Radio may change the

track being played by modifying the

name-device in the Bluetooth®

settings of the telephone (where

241

provided), if the device is by means of

USB after the Bluetooth® connection.

After updating the phone software, for

proper operation, it is recommended

to remove the phone from the list of

devices linked to the radio, delete the

previous system pairing also from the

list of Bluetooth® devices on the

phone and make a new pairing.

display and call contacts from the

registers of previous calls

pair up to 10 phones/audio device

to make access and connection easier

and quicker

transfer calls from the system to

the mobile phone and vice versa and

deactivate the microphone audio for

private conversations

access “Settings” and select “Add

device” to start the pairing procedure,

then search for the Uconnect™ device

on the mobile phone

when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display or

confirm on the mobile phone the PIN

displayed

during the pairing stage a screen

appears on the display showing the

progress of the operation

The mobile phone audio is transmitted

through the car’s sound system; the

system automatically mutes the radio

when the Phone function is used.

USB SOURCE

The car has a USB port on the front

panel.

when the pairing procedure is

When a USB device is inserted with

the radio on, it starts to play the tracks

on the device if the "AutoPlay" is set to

"ON" in the "Audio" menu.

completed successfully, a screen

is displayed: answer "Yes" to the

question to pair the mobile phone as

favourite (the mobile phone will have

priority over all other mobile phones

to be paired subsequently). If no other

devices are paired, the system will

consider the first paired device as the

preferred one

Pairing a mobile phone

WARNING Carry out this operation

only with car stationary and in safety

conditions; this function is deactivated

when the car is moving.

PHONE MODE

Phone mode activation

Press the “Phone” button on the

display to activate the Phone mode.

To consult the list of mobile phones

and functions supported, contact

Customer Care on the number

provided in the Warranty or visit the

Use the graphic buttons on the display

to:

The pairing procedure for a mobile

phone is described below: always

consult the handbook for the mobile

phone in any case.

NOTE The priority is determined

according to the order of connection

for mobile phones which are not set as

favourite. The last phone connected will

have the highest priority.

To pair the mobile phone, proceed as

follows:

activate the Bluetooth® function on

the mobile phone

press the "Phone" graphic button on

the display

If no phone is paired with the system

yet, the display shows a dedicated

screen

NOTE On some mobile phones, to

make the text voice reading function

available, the text notification option

on the phone must be enabled; this

option is usually available on the phone,

in the Bluetooth® connections menu

for a device registered as Uconnect™.

dial the phone number (using the

graphic dial pad on the display)

display and call the contacts in the

phonebook of the mobile phone

242

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the Uconnect™

system in order to make it effective.

NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of Bluetooth®

devices on the phone and make a new

pairing.

When a text message is received, the

display will show a screen where the

options "Show", "Call" or "Ignore" can

be selected.

"Do Not Disturb" function

If supported by the connected

phone, the driver can press the "Do

Not Disturb" graphic button to stop

receiving notifications of incoming calls

or text messages. The driver can reply

with a default message or a message

customised in the settings.

Press the "Text" graphic button to

access the list of text messages

received by the mobile phone (the list

displays a maximum of 60 messages

received).

Text message options

Predefined messages are stored in the

system memory and can be sent to

answer a received message or as a

new message:

NOTE On some mobile phones, to

make the text voice reading function

available, the text notification option

on the phone must be enabled; this

option is usually available on the phone,

in the Bluetooth® connections menu

for a device registered as Uconnect™.

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the Uconnect™

system in order to make it effective.

Making a phone call

The operations described below can

only be accessed if supported by the

mobile phone in use. For all functions

available, refer to the mobile phone

owner's handbook.

Yes

No

Okay

I can't talk right now

Call me

I'll call you later

I’m on my way

Thanks

A call can be made by:

pressing the "Phonebook"graphic

button

WARNING Some mobile phones may

not take the text message delivery

confirmation settings into account

when interfacing with the Uconnect™

system.If a text message is sent via the

Uconnect™ system, the user could

face an additional cost, without any

warning, due to the text message

delivery confirmation request sent by

the phone. For any problems related

to the above, contact your telephone

service provider.

I'll be late

Stuck in traffic

Start without me

Where are you?

Are you there yet?

I need directions

I'm lost

pressing the “Recent” button

pressing the "Dial" graphic button

Text Message Reader

The system can read the messages

received by the mobile phone. To use

this function, the mobile phone must

support the text exchange function

through Bluetooth®.

See you later

I will be 5 (or 10, 15, 20, 25, 30, 45,

60) minutes late (*)

See you in 5 (or 10, 15, 20, 25, 30,

45, 60) minutes (*)

If this operation is not supported by

the phone, the corresponding "Text

message" graphic button is deactivated

(greyed out).

243

(*) Only use the numbers listed,

otherwise the system will not take the

message.

e

If the smartphone is connected

correctly to the car via the USB port,

the Apple CarPlay or Android Auto icon

will be displayed in place of the

graphic button in the main menu.

NOTE The date and time shown

on the Uconnect™ system display

must match the actual date and time,

even after disconnecting the of the

battery. Adjust it from the "Settings"

menu of the Uconnect™ system. Any

discrepancy between the date and time

on the display and the actual date and

time may be due to a malfunction in

Apple CarPlay/Android Auto.

Before use, download the Android Auto

application to your smartphone from

Google Play Store.

NOTE For details on how to send a text

message using the voice commands,

refer to the dedicated paragraph.

When receiving a text message, the

systems also allows the same message

to be forwarded.

Starting from Android 10, the Android

Auto app is integrated into your

phone. Downloading is therefore not

necessary.

The application is compatible with

Android 5.0 (Lollipop) and later

versions. To use Android Auto, the

smartphone must be connected to the

car by means of a USB cable.

On the first connection, you will have

to perform the setup procedure that

appears on the smartphone. This

procedure can only be carried out with

the car stationary and the handbrake

applied, checking that the time and

date of the Uconnect™ system are

correct.

Browsing favourites

(for versions/markets, where provided)

You can view and manage your

favourite numbers on the radio using

the steering wheel controls. To use

this function, the mobile phone must

support exchanging information via

Bluetooth® and the favourite numbers

must have been saved previously as

such in the Uconnect™ system.

Apple CarPlay App Setup

Apple CarPlay is compatible with the

iPhone 5 or more recent models, with

the iOS 7.1 operating system or later

versions.

Apple CarPlay and

Android Auto

(where provided)

Once connected to the USB port, the

Android Auto application establishes a

parallel Bluetooth® connection.

Interaction

Before using Apple CarPlay, enable Siri

from "Settings" > "General" > “Siri" on

the smartphone.

The Apple CarPlay and Android Auto

applications allow you to use your

smartphone in the car safely and

intuitively. To enable them, connect a

compatible smartphone to the USB

port of the car and the contents of the

phone will be automatically shown on

the Uconnect™ system display.

To check the compatibility of your

smartphone, refer to the indications on

the websites:

After the setup procedure, the

application will run automatically on

the Uconnect™ system when your

smartphone is connected to the USB

port in the car.

To use Apple CarPlay, the smartphone

must be connected to the car by

means of a USB cable.

NOTE Enabling Apple CarPlay or some

operations could require interaction on

the smartphone. If necessary, complete

the step on your device (smartphone).

Android Auto APP Setup

Apple CarPlay: to integrate with

Apple CarPlay, press the button on

the steering wheel and, using the

TUNE SCROLL / BROWSE ENTER

button/knob select and confirm or hold

244

the "Home" graphic button pressed

(long press on the graphic button) on

the display in Apple CarPlay

Android Auto: to integrate with

Android Auto, press the button on

smartphone from the USB port of the

car.

SETTINGS

Press the "Settings" graphic button

on the display to display the main

"Settings" menu with the relative

submenus (where provided).

NOTE The menu items displayed vary

according to the versions.

The menu includes the following items:

Display

Clock & Date

Key off options

Audio

Phone/Bluetooth

the steering wheel

(hold the

button pressed) and, using the TUNE

SCROLL / BROWSE ENTER

button/knob select and confirm or

hold the "Microphone" graphic button

pressed (long press on the graphic

button) on the display in Android Auto

Navigation

197

F1D1040

NOTE During the calls, we recommend

not directing the central vents or the air

vent towards the microphone as the

noise of the air on the microphone

could worsen voice command

With the Apple CarPlay and Android

Auto applications, you can choose

to use the navigation system on your

smartphone.

Radio Setup

Restore Default Settings

Clear Personal Data

performance.

NOTE Voice entry of addresses is

only supported in the country in which

you are located and provided that

the system language matches the

local language. For example, if the car

is located in Italy, it will be possible

to enter Italian addresses only if the

system language is set to "Italian".

IMPORTANT It is advisable to position

the smartphone horizontally as shown

in fig. 197 so that in the case of a

collision or accident it does not pose a

danger and at the same time does not

obstruct the view while driving.

Exiting from the Apple CarPlay and

Android Auto apps

VOICE CONTROLS

Voice recognition microphone

(where provided)

You can still access the contents of the

Uconnect™ system with the CarPlay

app enabled by using the controls

available and viewable on its display.

To return to the Uconnect™ system

contents with the Android Auto app

enabled, according to the version of

the app you are using, select the last

item on the Android Auto system bar

and select "Back to Uconnect or the

"Exit" icon on the main screen of

Android Auto.

On some versions, there are two

microphones for voice command

recognition under the soft top lining

(near the sunshade on the driver side

and on the passenger side) .

To ensure the best command reception

by the system, it is recommended to

talk towards the microphone.

To end the Apple CarPlay or Android

Auto session, physically disconnect the

245

HYBRID SYSTEM

SCREENS

(where provided)

Pressing the graphic button "E. Hybrid"

will display the list of available screens,

which contain qualitative information on

power flows:

Power flow

Auxiliary battery

199

F1D1071

201

F1D1073

Four scenarios are visible on the

"Power flow" screen:

"Regen Flows", fig. 200: power flows

from the wheels to the battery (the

battery is charging) during braking or

by inertia

The "Auxiliary Battery" screen fig. 202

displays a graph to show the status of

the battery, whether it is charging or

consuming.

“No flow", fig. 198: no arrow is visible

or moves between the parts. The

motor can be switched on in a “ready”

state

202

F1D1074

200

F1D1072

198

F1D1070

“eAssist flows", fig. 201: power flows

from the ICE to the wheels and also

from the battery to the wheels (on

request, the battery provides additional

power)

“ICE Flows", fig. 199: power flows

from ICE to the wheels (ICE provides

driving power). Arrows show power

flow

246

app and can also detect unauthorised

car towing or tampering.

Uconnect™ app and the web portal

MOPAR® CONNECT

(where provided)

my:RemoteControl: package for

managing remote functions from the

Uconnect™ smartphone app, such

of the car location on the map or

locking/unlocking the doors, unlocking

the boot and flashing the hazard

warning lights for 4 seconds.

With Mobility Services, it is also

possible to take advantage of

proposals from Manufacturer partners.

PRIVACY MODE

These services let you keep your car

under control at all times and receive

assistance in the event of accident,

theft or breakdown.

Privacy mode lets you disable the

“Find car”, “Notify Area” and “Notify

Speed” services, which allow registered

customers to locate their cars, for a

fixed time.

Availability of the services depends

on the country (list available on the

Request activation by following the

instructions received at the email

address given when your car was

handed over to you.

my:Car: package for using

Uconnect™ app to remotely monitor

the car, such as the fuel level and tyre

pressures. The package also includes

the Vehicle Condition Report to check

the state of health of the car via web

and with a monthly email.

WARNING Car position tracing remains

active for the assistance services,

where provided, in the event of

accident or car theft, but is not visible

to the customer.

SERVICES

WARNING Some of the services listed

below may not be available if the car

is left with the engine off for more than

20 days. Start the engine to reactivate

these services.

my:Journey: package for using the

Uconnect™ app to display and

manage travel, with dates, maps,

personal notes and travel reports.

Download the Uconnect™ app

for smartphones or access the

the connected services.

PRIVACY MODE activation

procedure

Proceed as follows:

According on the equipment of the car

and of the country, different services

may be available for different durations.

For further information about your car,

go to the personal page on the official

Fiat website.

take note of the total odometer

reading;

make sure that the instrument panel

is off;

Send the following text message

to +393424112613: "PRIVACY

<VEHICLE_CHASSIS_NUM>

<TOTAL_MILEAGE_KM>" (e.g.:

PRIVACY ZFA3340000P123456

12532). You can find the vehicle

identification number in the registration

document;

You can find all the details about the

services in the Mopar® Connect

section of the

portal.

Some of the packages made available

to the customer are:

The main functions of the

my:RemoteControl, my:Car

and my:Journey packages

(where provided) can be run using

Google Assistant voice commands

(where provided), in addition to the

my:Assistant: package for customer

assistance in the event of an accident,

breakdown or attempted theft. The

package is available from Uconnect™

247

before starting the engine, wait to

receive the text message confirming

that Privacy mode has been activated

and indicating when it expires.

When you have received the

OFFICIAL TYPE

APPROVALS

RADIO DEVICES

confirmation, you can start your trip in

the knowledge that the car will not be

tracked until the indicated expiry time. If

it expires while you are still travelling,

Privacy mode will be extended until you

turn off the engine (instrument panel

off).

All radio equipment provided with

the car complies with Directive

2014/53/EU, UA.RED.TR, the French

SAR Decree Law of 15/11/2019 and

the UKCA (UK Conformity Assessed)

Certification in force in the United

Kingdom. For more information

go to or

If you receive a text message indicating

that your request was not successful,

you must be aware that the car will

continue to be visible to the registered

customer.

RADIO FREQUENCY

DEVICES

If you have any doubts or problems

during activation, consult the FAQ on

the

contact the Fiat Dealership or contact

Customer Care.

All radio frequency devices comply with

the regulations in force in the countries

in which they are sold.

For more information go to

or

248

DASHBOARD (RIGHT-HAND DRIVE VERSION)

^Tꢀ^{he presence and position of controls, instruments and gauges may vary depending on the versions.}

203

F0W0476

1. Adjustable and directable air diffusers 2. Exterior light control stalk 3. Driver front airbag 4. Windscreen wiper/rear window

wiper/trip computer control lever 5. Adjustable and directable central air vents 6. Passenger front airbag 7. Glove compartment

(for versions/markets, where provided) 8. Radio (for versions/markets, where provided) 9. Control buttons 10. Gear lever 11.

Heating/ventilation/climate control system controls 12. Ignition device 13. Instrument panel 14. Electric front windows 15.

ECO/ASR OFF buttons (for versions/markets, where provided)

249

DASHBOARD AND INSTRUMENT PANEL

The instrument background colour and type may vary according to the versions. The warning lights on the instrument panel

may change according to the version/trim level of the vehicle.

ꢀ

.

C

TOT

kmi

204

F1D0811

A. Speedometer B. Multifunction display C. Rev counter

250

Pull lever A fig. 205 or fig. 206 upwards

to operate the handbrake, until the car

is braked.

WHEN PARKED

Stop the engine and engage the

st

handbrake. Engage a gear (1 gear

To disengage the handbrake, slightly

raise lever A and hold button B

if the car is parked facing uphill or

reverse if facing downhill) and leave the

wheels turned. You are advised to

block the wheels with a wedge or a

stone if the car is parked on a steep

slope. Always remove the ignition key

when leaving the car.

pressed, checking that the

light switches off in the instrument

warning

panel.

200) 201) 202)

PARKING BRAKE

WARNING

200) Never leave children unattended in

the car. Always remove the key from the

ignition when leaving the car and take it

with you.

201) The car should be braked after a few

clicks of the lever, if it is not, contact a Fiat

Dealership to have it adjusted.

202) In the case of parking manoeuvres

on roads on a gradient, the front wheels

must be steered towards the pavement

(when parking downhill), or in the opposite

direction if the vehicle is parked uphill.

Block the wheels with a wedge or a stone

if the car is parked on a steep slope.

205

F0W0296

B

A

206

F1D1026

251

MULTIMEDIA for Your Fiat Panda SUV Fourth Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals