Get MULTIMEDIA -> 7 Touchscreen Radio Guide for Fiat Panda SUV Fourth Generation (2024-2026)

7” TOUCHSCREEN RADIO (for versions/markets, where provided)

CONTROLS ON FRONT PANEL

195

F1D1000

235

CONTROLS ON THE DASHBOARD

ꢀ

Button

Functions

Mode

On/off

Brief button press

/ VOLUME

Volume adjustment

Left/right rotation of knob

Brief button press

Volume activation/deactivation (Mute/Pause)

Confirmation of the option displayed

Open browsing list (Radio or Media mode)

Brief button press

Scrolling the list or tuning to a radio station

Display list of stations (Radio mode)

Scroll contents of sources (Media mode)

Media source track change

TUNE SCROLL /

BROWSE ENTER

Left/right rotation of knob

Station change (RADIO mode)

236

GRAPHIC BUTTONS ON DISPLAY

ꢀ

Graphic button

Functions

Mode

Press graphic button

Radio

Media

Phone

Access to the Radio mode

Source selection: USB, Bluetooth®

Press graphic button

Access to the Phone mode

Access to the additional functions (display of Time,

Compass, Media Player and App/Services installed

in the car)

Apps

Press graphic button

Compass

Settings

Audio

Viewing compass information

Access the settings menu

Press graphic button

Access the Audio settings menu

237

STEERING WHEEL CONTROLS

(where provided)

The controls for the main system functions are present on the steering wheel to make control easier. The activation of the

function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in the table

below.

196

F1D1001

238

STEERING WHEEL CONTROLS SUMMARY TABLE

ꢀ

Button

Interaction

Acceptance of incoming call

Acceptance of the second incoming call and putting the active call on hold

IMPORTANT: the voice commands only serve to interact with the voice assistance (Siri Eyes Free or Google Assistant).

For Apple devices, it is possible to interact with mobile devices connected via either Bluetooth or USB, while a USB

connection is required for Android devices.

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Interruption of voice recognition

Note: if, by pressing the button, the conditions for activating interaction with Siri or the Google Assistant are not met,

the system will indicate the correct conditions of use by means of a pop-up on the display.

Rejection of incoming call

Ending of call in progress

Radio preset scroll (only in Radio mode)

Short press: volume on/off (Mute/Pause)

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB, Bluetooth® mode): selection of previous/next track

Long press (USB, Bluetooth® mode): fast forward/rewind until released

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

+/-

SRC

Audio source selection: FM, AM, DAB (for versions/markets, where provided), Bluetooth® and USB

239

corresponding to the selected band is

highlighted).

TOUCHSCREEN

FUNCTION

"Equalizer" (where provided)

“Speed Adj Volume” (speed-

dependent automatic volume control)

“Loudness” (where provided)

"AutoPlay"

The system uses the touchscreen

function; to interact with the different

functions, press the graphic buttons

displayed.

NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided.

On the right side: “Info” graphic

button display: additional information

on the source being played.

At the bottom: display of the following

buttons:

"Auto-On Radio"

To confirm a selection, press the "OK"

graphic button.

MEDIA MODE

Press the "Select Source" graphic

button to select the desired audio

source from those available: USB and

Bluetooth®.

To go back to the previous screen,

press the (Delete) button or,

depending on the active screen,

Done.

/

RADIO (TUNER) MODE

The system is switched on/off by

pressing the (ON/OFF) button/knob.

Turn the button/knob clockwise

to increase the radio volume or

anticlockwise to decrease it.

WARNING Applications used

on portable devices may be not

compatible with the Uconnect™

system.

"Browse": list of the radio stations

available;

/ : selecting previous/next

radio station

"Tune" : manual radio station tuning

“Audio”: access to the “Audio

Settings” screen

After Media mode is selected, the

following information is shown on the

display:

The system is equipped with the

following tuners: AM, FM and DAB (for

versions/markets, where provided).

After the desired radio station is

selected, the following information is

shown on the display:

Audio menu

At the top: information on the track

being played and the following graphic

buttons:

To access the "Audio" menu press the

Audio" button located at the bottom of

the display.

"Repeat Song", "Repeat All" or

"Repeat Off": repeat the current song,

all songs or turn the function off

“Shuffle”: to play the tracks in

random order

Track progress and duration

In the middle: information on the track

being played.

Pressing the “Audio” button

automatically accesses the “Settings”

menu from which it is possible to make

the desired adjustments.

At the top: display of the stored radio

station (preset) list. The station being

listened to is highlighted.

At the centre: the name of station

being listened too is displayed.

On the left side: displays the “AM”,

“FM”, “DAB” (where provided) graphic

buttons for selecting the desired

frequency band (the graphic button

The following adjustments can be

carried out using the "Audio" menu:

"Balance" (left/right and front/rear

sound balance adjustment)

On the left: display of the following

buttons:

240

on the information present on the

tracks.

Selected device or audio source

“Select Source”: select the required

audio source

search for Uconnect™ on the

Bluetooth® audio device (during the

pairing stage a screen is displayed

showing the progress of the operation)

when requested by the audio device,

enter the PIN code shown on the

system display or confirm on the device

the PIN displayed

if the pairing procedure is completed

successfully, a screen is displayed.

Answer “Yes” to the question to pair

the Bluetooth® audio device as

favourite (the device will have priority

over all other devices to be paired

subsequently). If "No" is selected, the

priority is determined according to the

order of connection. The last device

connected will have the highest priority

an audio device can also be

NOTE This button might be disabled for

some Apple® devices

On the right: display of the following

buttons:

Press the "Tracks" graphic button to

activate this function on the source

being played.

"Info": additional information about

the track playing

“Tracks”: list of available tracks

At the bottom: information on the

track being played and the following

graphic buttons:

Turn the TUNE SCROLL button/knob

to select the desired category and then

press the button/knob to confirm the

selection.

“Bluetooth”: for a Bluetooth® audio

source, opens the list of devices

"Browse" for a USB source, opens

browsing

NOTE The indexing time of a USB

device can vary depending on the

media inserted (in some cases it can

take a few minutes).

/

selection

: previous/next track

BLUETOOTH® SOURCE

This mode is activated by pairing a

Bluetooth® device containing music

tracks with the system.

: pause track being played

“Audio”: access to the “Audio

Settings” screen

paired by pressing the "Phone"

graphic button on the display and

by selecting "Settings" or selecting

"Phone/Bluetooth" from the "Settings"

menu.

PAIRING A BLUETOOTH®

AUDIO DEVICE

To pair a Bluetooth® audio device,

proceed as follows:

Track selection

The “Tracks” function allows you to

open a window with the list of tracks

being played.

activate the Bluetooth® function on

the device

press the "Media" graphic button on

the display

press the "Select Source" graphic

button

With the TUNE SCROLL button/knob

you can browse the list of artists,

genres, etc...

WARNING If the Bluetooth®

connection between mobile phone

and system is lost, consult the mobile

phone handbook.

The choices available depend on the

device connected.

For example, on a USB device you can

also scroll through the list of artists,

genres and albums available depending

select the Bluetooth® Media source

press the "Add Device" graphic

button

NOTE The Radio may change the

track being played by modifying the

name-device in the Bluetooth®

settings of the telephone (where

241

provided), if the device is by means of

USB after the Bluetooth® connection.

After updating the phone software, for

proper operation, it is recommended

to remove the phone from the list of

devices linked to the radio, delete the

previous system pairing also from the

list of Bluetooth® devices on the

phone and make a new pairing.

display and call contacts from the

registers of previous calls

pair up to 10 phones/audio device

to make access and connection easier

and quicker

transfer calls from the system to

the mobile phone and vice versa and

deactivate the microphone audio for

private conversations

access “Settings” and select “Add

device” to start the pairing procedure,

then search for the Uconnect™ device

on the mobile phone

when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display or

confirm on the mobile phone the PIN

displayed

during the pairing stage a screen

appears on the display showing the

progress of the operation

The mobile phone audio is transmitted

through the car’s sound system; the

system automatically mutes the radio

when the Phone function is used.

USB SOURCE

The car has a USB port on the front

panel.

when the pairing procedure is

When a USB device is inserted with

the radio on, it starts to play the tracks

on the device if the "AutoPlay" is set to

"ON" in the "Audio" menu.

completed successfully, a screen

is displayed: answer "Yes" to the

question to pair the mobile phone as

favourite (the mobile phone will have

priority over all other mobile phones

to be paired subsequently). If no other

devices are paired, the system will

consider the first paired device as the

preferred one

Pairing a mobile phone

WARNING Carry out this operation

only with car stationary and in safety

conditions; this function is deactivated

when the car is moving.

PHONE MODE

Phone mode activation

Press the “Phone” button on the

display to activate the Phone mode.

To consult the list of mobile phones

and functions supported, contact

Customer Care on the number

provided in the Warranty or visit the

Use the graphic buttons on the display

to:

The pairing procedure for a mobile

phone is described below: always

consult the handbook for the mobile

phone in any case.

NOTE The priority is determined

according to the order of connection

for mobile phones which are not set as

favourite. The last phone connected will

have the highest priority.

To pair the mobile phone, proceed as

follows:

activate the Bluetooth® function on

the mobile phone

press the "Phone" graphic button on

the display

If no phone is paired with the system

yet, the display shows a dedicated

screen

NOTE On some mobile phones, to

make the text voice reading function

available, the text notification option

on the phone must be enabled; this

option is usually available on the phone,

in the Bluetooth® connections menu

for a device registered as Uconnect™.

dial the phone number (using the

graphic dial pad on the display)

display and call the contacts in the

phonebook of the mobile phone

242

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the Uconnect™

system in order to make it effective.

NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of Bluetooth®

devices on the phone and make a new

pairing.

When a text message is received, the

display will show a screen where the

options "Show", "Call" or "Ignore" can

be selected.

"Do Not Disturb" function

If supported by the connected

phone, the driver can press the "Do

Not Disturb" graphic button to stop

receiving notifications of incoming calls

or text messages. The driver can reply

with a default message or a message

customised in the settings.

Press the "Text" graphic button to

access the list of text messages

received by the mobile phone (the list

displays a maximum of 60 messages

received).

Text message options

Predefined messages are stored in the

system memory and can be sent to

answer a received message or as a

new message:

NOTE On some mobile phones, to

make the text voice reading function

available, the text notification option

on the phone must be enabled; this

option is usually available on the phone,

in the Bluetooth® connections menu

for a device registered as Uconnect™.

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the Uconnect™

system in order to make it effective.

Making a phone call

The operations described below can

only be accessed if supported by the

mobile phone in use. For all functions

available, refer to the mobile phone

owner's handbook.

Yes

No

Okay

I can't talk right now

Call me

I'll call you later

I’m on my way

Thanks

A call can be made by:

pressing the "Phonebook"graphic

button

WARNING Some mobile phones may

not take the text message delivery

confirmation settings into account

when interfacing with the Uconnect™

system.If a text message is sent via the

Uconnect™ system, the user could

face an additional cost, without any

warning, due to the text message

delivery confirmation request sent by

the phone. For any problems related

to the above, contact your telephone

service provider.

I'll be late

Stuck in traffic

Start without me

Where are you?

Are you there yet?

I need directions

I'm lost

pressing the “Recent” button

pressing the "Dial" graphic button

Text Message Reader

The system can read the messages

received by the mobile phone. To use

this function, the mobile phone must

support the text exchange function

through Bluetooth®.

See you later

I will be 5 (or 10, 15, 20, 25, 30, 45,

60) minutes late (*)

See you in 5 (or 10, 15, 20, 25, 30,

45, 60) minutes (*)

If this operation is not supported by

the phone, the corresponding "Text

message" graphic button is deactivated

(greyed out).

243

(*) Only use the numbers listed,

otherwise the system will not take the

message.

e

If the smartphone is connected

correctly to the car via the USB port,

the Apple CarPlay or Android Auto icon

will be displayed in place of the

graphic button in the main menu.

NOTE The date and time shown

on the Uconnect™ system display

must match the actual date and time,

even after disconnecting the of the

battery. Adjust it from the "Settings"

menu of the Uconnect™ system. Any

discrepancy between the date and time

on the display and the actual date and

time may be due to a malfunction in

Apple CarPlay/Android Auto.

Before use, download the Android Auto

application to your smartphone from

Google Play Store.

NOTE For details on how to send a text

message using the voice commands,

refer to the dedicated paragraph.

When receiving a text message, the

systems also allows the same message

to be forwarded.

Starting from Android 10, the Android

Auto app is integrated into your

phone. Downloading is therefore not

necessary.

The application is compatible with

Android 5.0 (Lollipop) and later

versions. To use Android Auto, the

smartphone must be connected to the

car by means of a USB cable.

On the first connection, you will have

to perform the setup procedure that

appears on the smartphone. This

procedure can only be carried out with

the car stationary and the handbrake

applied, checking that the time and

date of the Uconnect™ system are

correct.

Browsing favourites

(for versions/markets, where provided)

You can view and manage your

favourite numbers on the radio using

the steering wheel controls. To use

this function, the mobile phone must

support exchanging information via

Bluetooth® and the favourite numbers

must have been saved previously as

such in the Uconnect™ system.

Apple CarPlay App Setup

Apple CarPlay is compatible with the

iPhone 5 or more recent models, with

the iOS 7.1 operating system or later

versions.

Apple CarPlay and

Android Auto

(where provided)

Once connected to the USB port, the

Android Auto application establishes a

parallel Bluetooth® connection.

Interaction

Before using Apple CarPlay, enable Siri

from "Settings" > "General" > “Siri" on

the smartphone.

The Apple CarPlay and Android Auto

applications allow you to use your

smartphone in the car safely and

intuitively. To enable them, connect a

compatible smartphone to the USB

port of the car and the contents of the

phone will be automatically shown on

the Uconnect™ system display.

To check the compatibility of your

smartphone, refer to the indications on

the websites:

After the setup procedure, the

application will run automatically on

the Uconnect™ system when your

smartphone is connected to the USB

port in the car.

To use Apple CarPlay, the smartphone

must be connected to the car by

means of a USB cable.

NOTE Enabling Apple CarPlay or some

operations could require interaction on

the smartphone. If necessary, complete

the step on your device (smartphone).

Android Auto APP Setup

Apple CarPlay: to integrate with

Apple CarPlay, press the button on

the steering wheel and, using the

TUNE SCROLL / BROWSE ENTER

button/knob select and confirm or hold

244

the "Home" graphic button pressed

(long press on the graphic button) on

the display in Apple CarPlay

Android Auto: to integrate with

Android Auto, press the button on

smartphone from the USB port of the

car.

SETTINGS

Press the "Settings" graphic button

on the display to display the main

"Settings" menu with the relative

submenus (where provided).

NOTE The menu items displayed vary

according to the versions.

The menu includes the following items:

Display

Clock & Date

Key off options

Audio

Phone/Bluetooth

the steering wheel

(hold the

button pressed) and, using the TUNE

SCROLL / BROWSE ENTER

button/knob select and confirm or

hold the "Microphone" graphic button

pressed (long press on the graphic

button) on the display in Android Auto

Navigation

197

F1D1040

NOTE During the calls, we recommend

not directing the central vents or the air

vent towards the microphone as the

noise of the air on the microphone

could worsen voice command

With the Apple CarPlay and Android

Auto applications, you can choose

to use the navigation system on your

smartphone.

Radio Setup

Restore Default Settings

Clear Personal Data

performance.

NOTE Voice entry of addresses is

only supported in the country in which

you are located and provided that

the system language matches the

local language. For example, if the car

is located in Italy, it will be possible

to enter Italian addresses only if the

system language is set to "Italian".

IMPORTANT It is advisable to position

the smartphone horizontally as shown

in fig. 197 so that in the case of a

collision or accident it does not pose a

danger and at the same time does not

obstruct the view while driving.

Exiting from the Apple CarPlay and

Android Auto apps

VOICE CONTROLS

Voice recognition microphone

(where provided)

You can still access the contents of the

Uconnect™ system with the CarPlay

app enabled by using the controls

available and viewable on its display.

To return to the Uconnect™ system

contents with the Android Auto app

enabled, according to the version of

the app you are using, select the last

item on the Android Auto system bar

and select "Back to Uconnect or the

"Exit" icon on the main screen of

Android Auto.

On some versions, there are two

microphones for voice command

recognition under the soft top lining

(near the sunshade on the driver side

and on the passenger side) .

To ensure the best command reception

by the system, it is recommended to

talk towards the microphone.

To end the Apple CarPlay or Android

Auto session, physically disconnect the

245

HYBRID SYSTEM

SCREENS

(where provided)

Pressing the graphic button "E. Hybrid"

will display the list of available screens,

which contain qualitative information on

power flows:

Power flow

Auxiliary battery

199

F1D1071

201

F1D1073

Four scenarios are visible on the

"Power flow" screen:

"Regen Flows", fig. 200: power flows

from the wheels to the battery (the

battery is charging) during braking or

by inertia

The "Auxiliary Battery" screen fig. 202

displays a graph to show the status of

the battery, whether it is charging or

consuming.

“No flow", fig. 198: no arrow is visible

or moves between the parts. The

motor can be switched on in a “ready”

state

202

F1D1074

200

F1D1072

198

F1D1070

“eAssist flows", fig. 201: power flows

from the ICE to the wheels and also

from the battery to the wheels (on

request, the battery provides additional

power)

“ICE Flows", fig. 199: power flows

from ICE to the wheels (ICE provides

driving power). Arrows show power

flow

246

MULTIMEDIA -> 7 Touchscreen Radio for Your Fiat Panda SUV Fourth Generation (2024-2026)

Related Topics

MULTIMEDIA

Popular Owner Manuals

Latest Owner Manuals