Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

CAR MAINTENANCE -> CHECKING FLUID LEVELS for Your Fiat Punto SUV 1999-2010

CHECKING FLUID  
LEVELS  
3
4
IMPORTANT When topping up  
take care not to confuse the  
various types of fluids: they are  
all incompatible with one  
another and could seriously  
damage the car.  
1
5
2
IMPORTANT Never smoke  
while working in the engine  
compartment: gas and  
inflammable vapours may be  
present, with the risk of fire.  
F0I0231m  
1.28V mechanical gearbox version  
1 Engine oil - 2 Battery -  
3 Brake fluid -  
4 Windscreen/rear  
window/headlight washer fluid -  
5 Engine coolant  
F0I0226m  
1.28V Dualogic gearbox version  
242  
Downloaded from www.Manualslib.com manuals search engine  
1 Engine oil - 2 Battery -  
3 Brake fluid -  
4 Windscreen/rear  
window/headlight washer fluid -  
5 Engine coolant  
F0I0072m  
1.216V and 1.416V versions  
1 Engine oil - 2 Battery -  
3 Brake fluid -  
4 Windscreen/rear  
window/headlight washer fluid -  
5 Engine coolant  
F0I0233m  
1.816V version  
243  
Downloaded from www.Manualslib.com manuals search engine  
1 Engine oil - 2 Battery -  
3 Brake fluid -  
4 Windscreen/rear  
window/headlight washer fluid -  
5 Engine coolant  
F0I0148m  
1.3 Multijet version  
5
3
4
2
1
1 Engine oil - 2 Battery -  
3 Brake fluid -  
4 Windscreen/rear  
window/headlight washer fluid -  
5 Engine coolant  
F0I0211m  
1.9JTD - 1.9 Multijet versions  
244  
Downloaded from www.Manualslib.com manuals search engine  
ENGINE OIL  
Checking engine oil  
Check the oil level a few minutes (about 5) after the engine has stopped,  
with the car parked on level ground.  
Check that the level is within the MIN and MAX marks on the dipstick.  
The interval between the MIN and MAX marks corresponds to about  
one litre of oil.  
F0I0208m  
1.28V versions with mechanical and  
Dualogic gearbox  
Topping up engine oil  
If the oil level is near or even below the MIN mark, add oil through the  
filler neck, until reaching the MAX mark. Oil level shall never exceed the  
MAX mark.  
IMPORTANT If a routine check reveals that the oil level is above the  
MAX mark, contact Fiat Dealership to have the correct level restored.  
IMPORTANT After adding or changing the oil, let the engine turn over  
for a few seconds and wait a few minutes after turning it off before you  
check the level.  
F0I0130m  
1.216V and 1.416V versions  
F0I0205m  
1.816V versions  
245  
Downloaded from www.Manualslib.com manuals search engine  
Engine oil consumption  
Max engine oil consumption is usually 400 grams every 1000 km.  
When the car is new, the engine needs to run in, therefore the engine oil  
consumption can only be considered stabilised after the first 5000 - 6000  
km.  
IMPORTANT The oil consumption depends on driving style and the  
conditions under which the car is used.  
IMPORTANT Do not add oil with specifications other than that already  
in the engine.  
F0I0151m  
1.3 Multijet versions  
F0I0204m  
1.9JTD - 1.9 Multijet versions  
When the engine is hot, take care when working inside the engine compartment to  
avoid burns. Remember that when the engine is hot, the fan may cut in: danger of  
injury. Scarves, ties and other loose clothing might be pulled by moving parts.  
WARNING  
Used engine oil and filter contain harmful substances for the environment.  
Contact Fiat Dealership to have the oil and filter changed.  
246  
Downloaded from www.Manualslib.com manuals search engine  
ENGINE COOLANT FLUID  
The coolant level shall be checked with cold engine and shall be included  
between the MIN and MAX mark on the reservoir.  
If the level is low, pour slowly a mixture of 50% distilled water and 50%  
FL Selenia PARAFLU UP through the filler neck.  
A 50-50 mixture of PARAFLU UP and distilled water gives freeze  
protection to –35°C.  
Do not remove the reservoir cap when the engine is hot: you risk  
scalding yourself.  
F0I0054m  
The cooling system uses PARAFLU UP antifreeze. Do not  
add fluid having different specifications from that already  
existing. PARAFLU UP cannot be mixed with other types of  
fluids. Should other fluids be added, do not start the engine  
and contact Fiat Dealership as soon as possible.  
F0I0147m  
WARNING  
WARNING  
Do not remove the reservoir cap when the engine is hot: you risk scalding yourself.  
The cooling system is pressurised. If necessary, replace the cap only with another  
genuine one, otherwise system efficiency could be compromised.  
247  
Downloaded from www.Manualslib.com manuals search engine  
WINDSCREEN/REAR WINDOW/HEADLIGHT WASHER  
FLUID  
To top up, remove the cap (A) and then pour a mixture of water and  
TUTELA PROFESSIONAL SC 35, in the following concentrations:  
30% TUTELA PROFESSIONAL SC 35 and 70% water in summer;  
50% TUTELA PROFESSIONAL SC 35 and 50% water in winter.  
In case of temperatures below –20°C, use undiluted TUTELA  
PROFESSIONAL SC 35.  
F0I0145m  
Check level through the reservoir.  
Do not travel with the windscreen washer reservoir empty: the windscreen washer  
is fundamental for improving visibility.  
WARNING  
WARNING  
Certain commercial additives for windscreen washers are inflammable. The engine  
compartment contains hot components which may set it on fire.  
248  
Downloaded from www.Manualslib.com manuals search engine  
BRAKE FLUID  
Unscrew cap and check that the fluid level in the reservoir is at  
maximum.  
Fluid level in the reservoir shall not exceed the MAX mark.  
If fluid has to be added, it is suggested to use the brake fluid in table  
“Fluids and lubricants” (see chapter “Technical specifications”). When  
opening cap take the utmost care to prevent impurities entering the tank.  
For topping up, always use a funnel with integrated filter with mesh equal  
to or lower than 0.12 mm.  
F0I0055m  
IMPORTANT Brake fluid absorbs moisture; for this reason, if the car is  
mainly used in areas with a high degree of atmospheric humidity, the fluid  
should be replaced at more frequent intervals than specified in the  
“Service schedule”.  
Make sure that the highly corrosive brake fluid does not drip onto the paintwork. If it does, wash it  
off immediately with water.  
Brake fluid is poisonous and highly corrosive. In the event of accidental  
WARNING  
contact, wash the parts involved immediately with neutral soap and  
water, then rinse thoroughly. Call the doctor immediately if the fluid is  
swallowed.  
The symbol  
π
on the container indicates synthetic brake fluid, distinguishing it  
WARNING  
from the mineral kind. Using mineral fluids irreversibly damages the special  
braking system rubber seals.  
249  
Downloaded from www.Manualslib.com manuals search engine