Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

IN AN EMERGENCY -> IF AN EXTERIOR LIGHT BURNS OUT for Your Fiat Punto SUV 1999-2010

IF AN EXTERIOR LIGHT BURNS OUT  
For the type of bulb and power rating, see “When needing to change a  
bulb”.  
FRONT LIGHT UNITS  
The front light units contain: sidelights, dipped beam, main beam and  
direction indicator bulbs.  
The bulbs are arranged inside the light unit as follows:  
(1): sidelights/main beam headlights;  
(2): dipped beam headlights;  
F0I0138m  
(3): direction indicators.  
IMPORTANT After replacement, refit the covers correctly checking that  
they are properly secured.  
MAIN BEAM HEADLIGHTS  
To change the bulb, remove the protective cover (1), release the catch  
(A) and remove the bulb (B).  
F0I0215m  
DIPPED BEAM HEADLIGHTS  
To change the bulb, remove the protective cover (2), release the catch  
(A) and remove the bulb (B).  
F0I0186m  
217  
Downloaded from www.Manualslib.com manuals search engine  
FRONT SIDELIGHTS  
To change the bulb, remove the protective cover (1), remove connector  
(A) and remove the bulb (B).  
F0I0188m  
DIRECTION INDICATORS  
Front  
To change the bulb, remove the protective cover (3), turn connector (A)  
clockwise and remove the bulb (B).  
Side  
To change the bulb, proceed as follows:  
F0I0187m  
Press the lens (A) in the direction of the arrow (opposite to running  
direction) so to compress the clip (B) and remove the cluster;  
Turn the lens (A) counterclockwise and remove it; then remove the  
snap-fitted bulb (C).  
F0I0139m  
218  
Downloaded from www.Manualslib.com manuals search engine  
FRONT FOG LIGHTS  
Go to a Fiat Dealership to have bulbs replaced.  
REAR LIGHT UNIT  
To change the bulb, proceed as follows:  
from inside the car, remove the upper plastic cover (A) with the  
screwdriver provided to reach fastener (B);  
from inside the boot, fit extension (C) on the light cluster fastening  
nuts;  
F0I0163m  
insert the provided screwdriver (D) in the hole in the extension and  
loosen the light cluster fastening nuts;  
withdraw the connector and loosen the fastening screws shown in the  
figure by the arrows;  
remove the bulbs by pushing them slightly and turning them  
anticlockwise (bayonet coupling).  
F0I0162m  
219  
Downloaded from www.Manualslib.com manuals search engine  
The bulbs are arranged inside the light unit as follows:  
(A) - Side/taillight bulb  
(B) - Brake light bulb  
(C) - Direction indicator bulb  
(D) - Bulb for:  
left-hand cluster: rear fog light  
right-hand cluster: reversing light.  
F0I0213m  
F0I0099m  
F0I0100m  
ADDITIONAL BRAKING LIGHT (THIRD STOP)  
To change the bulb, proceed as follows:  
open the tailgate and loosen screws (A);  
release the clip (B) and open the bulb holder, the remove the bulb (C)  
to be replaced (clipped in).  
220  
Downloaded from www.Manualslib.com manuals search engine