Get Bluetooth? audio system -> Telephone Guide for Fiat Scudo Van Third Generation (2022-2025)

Bluetooth® audio system

Press and hold one of these buttons for

In the particular case of a multi-session CD, the

Joliet standard is recommended.

To protect the system, do not use a USB hub.

Information and advice

The CD player can play audio ﬁles with “.mp3”,

“.wma”, “.wav” and “.aac” ﬁle extensions, with a

bit rate of 32 to 320 Kbps.

It also supports TAG mode (ID3 tag, WMA TAG).

No other ﬁle types (".mp4", etc.) can be read.

Files of the ".wma" type should be to the wma 9

standard.

The sampling rates supported are 11, 22, 44 and

48 kHz.

Via the USB socket, the system can play audio

ﬁles with the extension “.mp3”, “.wma”, “.wav”,

“.cbr”, “.vbr" with a bit rate of 32 to 320 Kbps.

No other ﬁle types (".mp4", etc.) can be read.

Files of the ".wma" type should be to the wma 9

standard.

The sampling rates supported are 11, 22, 44 and

48 kHz.

File names should have fewer than 20

characters, avoiding special characters (e.g.

« ? ; ù) so as to avoid any reading or display

problems.

In order to be able to play a burned CDR or

CDRW, select ISO 9660 standards level 1, 2, or

Joliet, if possible, when burning the CD.

If the disc is burned in another format, it may not

be played correctly.

It is recommended that the same burning

standard always be used on an individual disc,

with the lowest speed possible (4x maximum) for

the best acoustic quality.

fast forward or rewind.

Bluetooth^®audio streaming

Streaming allows music ﬁles on the telephone to

be played via the vehicle's speakers.

Connect the telephone.

(Refer to the "Pairing a Bluetooth® telephone"

section).

Activate the streaming source by pressing

SOURCE.

In certain cases, playback of the audio ﬁles must

be initiated from the keypad.

Audio ﬁles can be selected using the buttons on

the audio system control panel and the steering-

mounted controls. The contextual information

can be displayed on the screen.

If the telephone supports the function. The audio

quality depends on the quality of transmission by

the telephone.

Only use USB memory sticks formatted

to FAT 32 (File Allocation Table).

It is recommended that you use genuine

Apple^®USB cables to guarantee correct

operation.

Telephone

Pairing a Bluetooth^®

telephone

As a safety measure and because it

requires sustained attention by the driver,

the pairing of a Bluetooth^®mobile telephone

with the Bluetooth^®hands-free system of your

audio system must be done with the vehicle

stationary and the ignition on.

Connecting Apple^®players

Connect the Apple^®player to the USB socket

using a suitable cable (not supplied).

Play starts automatically.

Activate the telephone's Bluetooth^®

function and ensure that it is "visible to

all" (telephone conﬁguration).

Control is via the audio system.

The classiﬁcations available are those of the

portable device connected (artists / albums /

genres / playlists).

The version of software in the audio system may

not be compatible with the generation of your

Apple^®player.

252

Bluetooth® audio system

Press the MENU button.

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth^®devices used.

Refer to your telephone’s user guide and your

service provider to check which services you

are able to access.

Completing the pairing

To complete the pairing, whichever

procedure is used (from the telephone or

from the system), conﬁrm that the code is the

same in the system and in the telephone and

validate.

Select "Connections".

Press OK to conﬁrm.

Select "Bluetooth Connections

management" and conﬁrm. The list of

paired telephones is displayed.

Press OK to conﬁrm.

If pairing fails, the number of attempts is not

restricted.

A message appears on the screen conﬁrming

the pairing.

Procedure from the telephone

Select the name of the system in the list

of detected devices.

Indicates that a device is connected.

If the pairing procedure fails, we

recommend deactivating and then

reactivating the Bluetooth^®function on the

telephone.

Information and advice

The "Telephone" menu provides access to the

following functions in particular: "Directory", if

your telephone is fully compatible, "Calls list",

"Consult the paired devices".

Depending on the type of telephone, you may be

asked to accept or conﬁrm access by the system

to each of these functions.

A number indicates the proﬁle of the

connection with the system:

– 1 for media or 1 for telephone.

– 2 for media and telephone.

Procedure from the system

Press the MENU button.

Indicates connection of the audio

steaming proﬁle.

Indicates connection of the hands-free

telephone proﬁle.

Select "Connections".

Conﬁrm with OK.

Go to the Brand's website for more

information (compatibility, more help,

etc.).

Select a telephone.

Select "Search for a device".

Conﬁrm with OK.

Press OK to conﬁrm.

Managing connections

Then select and conﬁrm:

The telephone connection automatically

includes hands free operation and audio

streaming.

The ability of the system to connect to just

one proﬁle depends on the telephone. Both

proﬁles may connect by default.

A window is displayed with a search in progress

message.

In the list of devices detected, select a telephone

to pair. Only one telephone can be paired at a

time.

– "Connect telephone"/"Disconnect

telephone" : to connect/disconnect the

telephone or the hands-free kit only.

– "Connect media player"/"Disconnect media

player" : to connect/disconnect streaming only.

253

Bluetooth® audio system

– "Connect telephone + media

Press this button for more than two

seconds for access to your directory, then

navigate using the thumb wheel.

Conﬁrm with OK.

player"/"Disconnect telephone + media

player" : to connect/disconnect the telephone

(hands-free kit and streaming).

Microphone oﬀ

Ending a call

– "Delete connection": to delete the pairing.

(so that the caller cannot hear)

In the contextual menu:

In the "Telephone" menu.

When you delete a pairing in the system,

remember to delete it from your

telephone as well.

Select "End call".

– select "Micro OFF" to switch oﬀ the

microphone.

– deselect "Micro OFF" to switch the

microphone on.

Conﬁrm with OK to end the call.

During a call, press one of these buttons

for more than two seconds.

Press OK to conﬁrm.

The system accesses the telephone's

contacts directory, depending on its

compatibility, and while it is connected via

Bluetooth.

Conﬁrm with OK.

Receiving a call

An incoming call is announced by a ring and a

superimposed display in the screen.

Select the "YES" tab in the screen using

the buttons.

Telephone mode

In the contextual menu:

With certain telephones connected by

Bluetooth you can send a contact to the

directory of the audio system.

Contacts imported in this way are saved in a

permanent directory visible to all, whatever

the telephone connected.

– select "Telephone mode" to transfer the

call to the telephone (for example, to leave the

vehicle while continuing a conversation).

– deselect "Telephone mode" to transfer the

call to the vehicle.

Conﬁrm with OK.

Press this button at the steering mounted

controls to accept the call.

The menu for the directory is not accessible if

it is empty.

Conﬁrm with OK.

Making a call

In the "Telephone" menu.

Select "Call".

Select "Dial".

If the contact has been cut oﬀ, when you

reconnect on returning to the vehicle,

the Bluetooth connection will be restored

automatically and sound returned to the

system (depending on the compatibility of the

telephone).

Managing calls

During a call, press OK to display the

Select "Directory".

Select "Calls list".

Conﬁrm with OK.

contextual menu.

End call

In some cases, the Telephone mode must be

activated from the telephone.

In the contextual menu, select "Hang up"

to end the call.

254

Download User Manual App

Bluetooth? audio system -> Telephone for Your Fiat Scudo Van Third Generation (2022-2025)

Related Topics

Bluetooth? audio system

Popular Owner Manuals

Latest Owner Manuals