Interior Air Quality -> Power Seats for Your Ford Explorer SUV Sixth Generation (2012-2020)

Seats  
WARNING: Make sure the seat fully  
locks into place by rocking it backward  
and forward. Not securing the seat into  
the locked position can be dangerous in  
a crash and could cause serious personal  
injury or death.  
E291151  
POWER SEATS  
WARNING: Do not adjust the driver  
seat or seat backrest when your vehicle  
is moving. This may result in sudden seat  
movement, causing the loss of control  
of your vehicle.  
E190838  
Adjusting the Seat Backrest  
WARNING: Do not place cargo or  
any objects behind the seatback before  
returning it to the original position.  
WARNING: Always drive and ride  
with your seatback upright and the lap  
belt snug and low across the hips.  
WARNING: Do not place cargo or  
any objects behind the seat backrest  
before returning it to the original position.  
Pull on the seat backrest to make sure  
that it has fully latched after returning  
the seat backrest to its original position.  
An unlatched seat may become  
dangerous if you stop suddenly or have  
a crash.  
149  
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing  
Seats  
10-Way Seat Controls  
E176038  
Adjusting the Lumbar Support(If  
Equipped)  
E176039  
150  
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing  
Seats  
8-Way Seat Controls  
E338902  
AdjustingtheMulti-ContourFront  
Seats With Active Motion (IfEquipped)  
Note: The engine must be running or the  
vehicle must be in accessory mode to  
activate the seats.  
Note: Allow a few seconds for any selection  
to activate. The seat backrest and cushion  
massage cannot function at the same time.  
E156301  
151  
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing  
Seats  
Massage Mode  
Lumbar and Bolster Mode  
A
B
Back massage intensity  
adjustment  
Upper lumbar  
Massage intensity decrease  
and off*  
Lumbar decrease  
Lower lumbar**  
C
Cushion massage intensity  
adjustment  
D
E
Massage intensity increase  
On and off  
Lumbar increase  
-
*The massage feature defaults to an  
Driver seat.  
Power mirrors.  
Optional power steering column.  
alternating massage mode with back  
massage intensity adjustment. The lumbar  
and bolster feature defaults to the middle  
lumbar mode.  
The memory control is on the driver door.  
**Press C a second time to adjust the back  
bolster. Press C a third time to adjust the  
cushion bolster.  
You can also adjust this feature through  
the touchscreen. When switched on, the  
system displays directions for you to adjust  
the lumbar settings in your seat or to set  
the massage function.  
MEMORY FUNCTION(IFEQUIPPED)  
E142554  
Saving a PreSet Position  
1. Switch the ignition on.  
WARNING: Before activating the  
memory seat, make sure that the area  
immediately surrounding the seat is clear  
of obstructions and that all occupants  
are clear of moving parts.  
2. Adjust the memory features to your  
preferred position.  
3. Press and hold the preferred preset  
button until you hear a single tone.  
You can save up to three preset memory  
positions. You can save a memory preset  
at any time.  
WARNING:Do not use the memory  
function when your vehicle is moving.  
This feature recalls the position of the  
following:  
152  
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing