Cleaning -> INSTRUMENT PANEL / INTERIOR TRIM for Your Ford Focus 4 Door Second Generation (2004-2010)

Cleaning  
WINDOWS AND WIPER BLADES  
The windshield, rear and side windows and the wiper blades should be  
cleaned regularly. If the wipers do not wipe properly, substances on the  
vehicle’s glass or the wiper blades may be the cause. These may include  
hot wax treatments used by commercial car washes, water repellent  
coatings, tree sap, or other organic contamination; these contaminants  
may cause squeaking or chatter noise from the blades, and streaking and  
smearing of the windshield. To clean these items, follow these tips:  
The windshield, rear windows and side windows may be cleaned with  
a non-abrasive cleaner such as Motorcraft Ultra-Clear Spray Glass  
Cleaner (ZC-23), available from your authorized dealer.  
The wiper blades can be cleaned with isopropyl (rubbing) alcohol or  
Motorcraft Premium Windshield Washer Concentrate (ZC-32-A),  
available from your authorized dealer. This washer fluid contains  
special solution in addition to alcohol which helps to remove the hot  
wax deposited on the wiper blade and windshield from automated car  
wash facilities. Be sure to replace wiper blades when they appear  
worn or do not function properly.  
Do not use abrasives, as they may cause scratches.  
Do not use fuel, kerosene, or paint thinner to clean any parts.  
If you cannot remove those streaks after cleaning with the glass cleaner  
or if the wipers chatter and move in a jerky motion, clean the outer  
surface of the windshield and the wiper blades using a sponge or soft  
cloth with a neutral detergent or mild-abrasive cleaning solution. After  
cleaning, rinse the windshield and wiper blades with clean water. The  
windshield is clean if beads do not form when you rinse the windshield  
with water.  
Do not use sharp objects, such as a razor blade, to clean the  
inside of the rear window or to remove decals, as it may cause  
damage to the rear window defroster’s heated grid lines.  
INSTRUMENT PANEL / INTERIOR TRIM AND CLUSTER LENS  
Clean the instrument panel, interior trim areas and cluster lens with a  
clean and damp white cotton cloth, then with a clean and dry white  
cotton cloth; you may also use Motorcraft Dash & Vinyl Cleaner  
(ZC-38-A) on the instrument panel and interior trim areas.  
Avoid cleaners or polishes that increase the gloss of the upper portion  
of the instrument panel. The dull finish in this area helps protect the  
driver from undesirable windshield reflection.  
183  
2007 Focus (foc)  
Owners Guide (post-2002-fmt)  
USA (fus)  
Cleaning  
Be certain to wash or wipe your hands clean if you have been in  
contact with certain products such as insect repellent and suntan  
lotion in order to avoid possible damage to the interior painted  
surfaces.  
Do not use household or glass cleaners as these may damage the  
finish of the instrument panel, interior trim and cluster lens.  
Do not use chemical solvents or strong detergents when cleaning  
the steering wheel or instrument panel to avoid contamination of  
the airbag system.  
If a staining liquid like coffee/juice has been spilled on the instrument  
panel or on interior trim surfaces, clean as follows:  
1. Wipe up spilled liquid using a clean white cotton cloth.  
2. Apply Motorcraft Deluxe Leather and Vinyl Cleaner (ZC-11-A) [In  
Canada use Motorcraft Multi-Purpose Cleaner (CXC-101)] to the wiped  
area and spread around evenly.  
3. Apply more Motorcraft cleaner to a clean white cotton cloth and press  
the cloth onto the soiled area–allow this to set at room temperature for  
30 minutes.  
4. Remove the soaked cloth, and if it is not soiled badly, use this cloth to  
clean the area by using a rubbing motion for 60 seconds.  
5. Following this, wipe area dry with a clean white cotton cloth.  
INTERIOR  
For fabric, carpets, cloth seats, safety belts and seats equipped with side  
airbags:  
Remove dust and loose dirt with a vacuum cleaner.  
Remove light stains and soil with Motorcraft Professional Strength  
Carpet & Upholstery Cleaner (ZC-54).  
If grease or tar is present on the material, spot-clean the area first  
with Motorcraft Spot and Stain Remover (ZC-14).  
If a ring forms on the fabric after spot cleaning, clean the entire area  
immediately (but do not oversaturate) or the ring will set.  
Do not use household cleaning products or glass cleaners, which can  
stain and discolor the fabric and affect the flame retardant abilities of  
the seat materials.  
184  
2007 Focus (foc)  
Owners Guide (post-2002-fmt)  
USA (fus)