Cleaning -> WINDOWS AND WIPER BLADES for Your Ford Focus 4 Door Second Generation (2004-2010)

Cleaning  
WINDOWS AND WIPER BLADES  
The windshield, rear and side windows and the wiper blades should be  
cleaned regularly. If the wipers do not wipe properly, substances on the  
vehicle’s glass or the wiper blades may be the cause. These may include  
hot wax treatments used by commercial car washes, water repellent  
coatings, tree sap, or other organic contamination; these contaminants  
may cause squeaking or chatter noise from the blades, and streaking and  
smearing of the windshield. To clean these items, follow these tips:  
The windshield, rear windows and side windows may be cleaned with  
a non-abrasive cleaner such as Motorcraft Ultra-Clear Spray Glass  
Cleaner (ZC-23), available from your authorized dealer.  
The wiper blades can be cleaned with isopropyl (rubbing) alcohol or  
Motorcraft Premium Windshield Washer Concentrate (ZC-32-A),  
available from your authorized dealer. This washer fluid contains  
special solution in addition to alcohol which helps to remove the hot  
wax deposited on the wiper blade and windshield from automated car  
wash facilities. Be sure to replace wiper blades when they appear  
worn or do not function properly.  
Do not use abrasives, as they may cause scratches.  
Do not use fuel, kerosene, or paint thinner to clean any parts.  
If you cannot remove those streaks after cleaning with the glass cleaner  
or if the wipers chatter and move in a jerky motion, clean the outer  
surface of the windshield and the wiper blades using a sponge or soft  
cloth with a neutral detergent or mild-abrasive cleaning solution. After  
cleaning, rinse the windshield and wiper blades with clean water. The  
windshield is clean if beads do not form when you rinse the windshield  
with water.  
Do not use sharp objects, such as a razor blade, to clean the  
inside of the rear window or to remove decals, as it may cause  
damage to the rear window defroster’s heated grid lines.  
INSTRUMENT PANEL / INTERIOR TRIM AND CLUSTER LENS  
Clean the instrument panel, interior trim areas and cluster lens with a  
clean and damp white cotton cloth, then with a clean and dry white  
cotton cloth; you may also use Motorcraft Dash & Vinyl Cleaner  
(ZC-38-A) on the instrument panel and interior trim areas.  
Avoid cleaners or polishes that increase the gloss of the upper portion  
of the instrument panel. The dull finish in this area helps protect the  
driver from undesirable windshield reflection.  
183  
2007 Focus (foc)  
Owners Guide (post-2002-fmt)  
USA (fus)