Get Doors and Locks -> Keyless Entry Guide for Ford Focus 4 Door Third generation(2010-2017)

Doors and Locks

Closing the Liftgate

E155976

A handle is located inside the liftgate to

help with closing.

E138637

You can use the keypad to do the

following:

KEYLESS ENTRY(If Equipped)

•

Lock or unlock the doors.

Program and erase user codes.

Arm and disarm the anti-theft alarm.

SECURICODE™ KEYLESS ENTRY

KEYPAD

The keypad is located near the driver

window. It is invisible until touched and

then it lights up so you can see and touch

the appropriate buttons.

Note: If you enter your entry code too fast

on the keypad, the unlock function may not

work. Enter your entry code again more

slowly.

You can operate the keypad with the

factory-set five-digit entry code. The code

is on the owner’s wallet card in the glove

box and is available from an authorized

dealer. You can also program up to five of

your own five-digit personal entry codes.

Programming a Personal Entry Code

1. Enter the factory-set five-digit code.

2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal five-digit code. You

must enter each number within five

seconds of each other.

4. Press 1·2 on the keypad to save

personal code 1.

The doors lock then unlock to confirm that

programming was successful.

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

Doors and Locks

To program additional personal entry

codes, repeat Steps 1-3, then for Step 4:

Locking and Unlocking the Doors

Locking All Doors

Press and hold 7·8 and 9·0 on the keypad

simultaneously with the driver door closed.

You do not need to enter a code first.

•

Press 3·4 to save personal code 2.

Press 5·6 to save personal code 3.

Press 7·8 to save personal code 4.

Press 9·0 to save personal code 5.

Unlocking All Doors

Enter the factory-set code or your personal

code, then press 3·4 on the keypad within

five seconds.

Hints:

•

Do not set a code that uses five of the

same number.

Do not use five numbers in sequential

order.

Unlocking Only the Driver Door

The factory-set code works even if you

have set your own personal code.

Enter the factory-set or your personal

five-digit code. You must press each

number within five seconds of each other.

The interior lamps illuminate.

Note: All doors unlock if the two-stage

unlocking feature is turned off. See Locking

and Unlocking (page 59).

Erasing a Personal Code

1. Enter the factory-set five-digit code.

2. Press and release 1·2 on the keypad

within five seconds.

3. Press and hold 1·2 for two seconds.

You must do this within five seconds

of completing step 2.

INTERIOR LUGGAGE

COMPARTMENT RELEASE - 4-

DOOR

All personal codes erase and only the

factory-set five-digit code works.

WARNINGS

Anti-Scan Feature

Keep vehicle doors and luggage

compartment locked and keep keys

and remote transmitters out of a

child’s reach. Unsupervised children could

lock themselves in the trunk and risk injury.

Children should be taught not to play in

vehicles.

The keypad goes into an anti-scan mode

if you enter the wrong code seven times.

This mode turns off the keypad for one

minute and the keypad lamp flashes.

The anti-scan feature turns off after any

of the following occur:

•

One minute of keypad inactivity.

Do not leave children or animals

unattended in the vehicle. On hot

You press the unlock button on the

days, the temperature in the trunk or

vehicle interior can rise very quickly.

Exposure of people or animals to these

high temperatures for even a short time

can cause death or serious heat-related

injuries, including brain damage. Small

children are particularly at risk.

remote control.

•

You switch your vehicle on.

You unlock the vehicle using intelligent

access.

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

Doors and Locks -> Keyless Entry for Your Ford Focus 4 Door Third generation(2010-2017)

Related Topics

Doors and Locks