Seatbelts -> Seatbelt Reminder for Your Ford Focus 4 Door Third generation(2010-2017)

Seatbelts  
Conditions of operation  
If...  
Then...  
The driver's safety belt is not buckled  
The safety belt warning light illuminates 1-  
before the ignition switch is turned to the 2 minutes and the warning chime sounds  
on position...  
4-8 seconds.  
The driver's safety belt is buckled while the The safety belt warning light and warning  
indicator light is illuminated and the  
warning chime is sounding...  
chime turn off.  
The driver's safety belt is buckled before The safety belt warning light and indicator  
the ignition switch is turned to the on posi-  
tion...  
chime remain off.  
The system uses information from the  
front passenger sensing system to  
determine if a front seat passenger is  
present and therefore potentially in need  
of a warning. To avoid activating the  
Belt-Minder feature for objects you place  
in the front passenger seat, only the front  
seat passengers receive warnings as  
determined by the front passenger sensing  
system.  
If the Belt-Minder warnings expire  
(warnings for about five minutes) for one  
passenger (driver or front passenger), the  
other passenger can still cause the  
Belt-Minder feature to turn on.  
SEATBELT REMINDER  
Belt-Minder  
This feature supplements the safety belt  
warning function by providing additional  
reminders that intermittently sound a tone  
and illuminate the safety belt warning light  
when you are in the driver seat or you have  
a front seat passenger and a safety belt is  
unbuckled.  
33  
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing  
Seatbelts  
If...  
Then...  
You and the front seat passenger buckle  
your safety belts before you switch the  
ignition on or less than 1-2 minutes elapse  
after you switch the ignition on...  
The Belt-Minder feature will not activate.  
You or the front seat passenger do not  
The Belt-Minder feature activates, the  
buckle your safety belts before your vehicle safety belt warning light illuminates and a  
reaches at least 6 mph (9.7 km/h) and 1-2 warning tone sounds for 6 seconds every  
minutes elapse after you switch the ignition 25 seconds, repeating for about 5 minutes  
on...  
or until you and the front seat passenger  
buckle your safety belts.  
The safety belt for the driver or front  
The Belt-Minder feature activates, the  
passenger is unbuckled for about 1 minute safety belt warning light illuminates and a  
while the vehicle is traveling at least 6 mph warning tone sounds for 6 seconds every  
(9.7 km/h) and more than 1-2 minutes  
elapse after you switch the ignition on...  
25 seconds, repeating for about 5 minutes  
or until you and the front seat passenger  
buckle your safety belts.  
Read Steps 1 - 4 thoroughly before  
proceeding with the programming  
procedure.  
Deactivating and Activating the  
Belt-Minder Feature  
Before following the procedure, make sure  
WARNING  
that:  
While the system allows you to  
deactivate it, this system is designed  
to improve your chances of being  
safely belted and surviving an accident.  
We recommend you leave the system  
activated for yourself and others who may  
use the vehicle.  
The parking brake is set.  
The transmission is in park (P)  
(automatic transmission) or neutral  
(N) (manual transmission).  
The ignition is off.  
The driver and front passenger safety  
belts are unbuckled.  
Note: The driver and front passenger  
warnings switch on and off independently.  
When you perform this procedure for one  
seating position, do not buckle the other  
position as this will terminate the process.  
Note: If you are using MyKey, you cannot  
disable the Belt-Minder. Also, if you have  
previously disabled the Belt-Minder, it will  
be re-enabled during the use of MyKey.  
See MyKey(page 54).  
1. Switch the ignition on. Do not start the  
vehicle.  
2. Wait until the safety belt warning light  
turns off (about one minute). After  
Step 2, wait an additional 5 seconds  
before proceeding with Step 3. Once  
you start Step 3, you must complete  
the procedure within 60 seconds.  
34  
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing  
Seatbelts  
3. For the seating position you are  
Ford Motor Company recommends that  
all safety belt assemblies in use in vehicles  
involved in a crash be replaced. However,  
if the crash was minor and an authorized  
dealer finds that the belts do not show  
damage and continue to operate properly,  
they do not need to be replaced. Safety  
belt assemblies not in use during a crash  
should also be inspected and replaced if  
either damage or improper operation is  
noted.  
switching off, buckle then unbuckle the  
safety belt three times at a moderate  
speed, ending in the unbuckled state.  
After Step 3, the safety belt warning  
light turns on.  
4. While the safety belt warning light is  
on, buckle and then unbuckle the  
safety belt. After Step 4, the safety belt  
warning light flashes for confirmation.  
This will switch the feature off for that  
Properly care for safety belts. See Vehicle  
seating position if it is currently on.  
Care (page 237).  
This will switch the feature on for that  
seating position if it is currently off.  
SEATBELT EXTENSION  
CHILD RESTRAINT AND  
WARNINGS  
SEATBELT MAINTENANCE  
Persons who fit into the vehicle's  
seatbelt should not use an extension.  
Unnecessary use could result in  
serious personal injury in the event of a  
crash.  
Inspect the vehicle safety belts and child  
safety seat systems periodically to make  
sure they work properly and are not  
damaged. Inspect the vehicle and child  
seat safety belts to make sure there are no  
nicks, tears or cuts. Replace if necessary.  
All vehicle safety belt assemblies, including  
retractors, buckles, front safety belt buckle  
assemblies, buckle support assemblies  
(slide bar-if equipped), shoulder belt  
height adjusters (if equipped), shoulder  
belt guide on seat back (if equipped), child  
safety seat LATCH and tether anchors, and  
attaching hardware, should be inspected  
after a crash. Read the child restraint  
manufacturer's instructions for additional  
inspection and maintenance information  
specific to the child restraint.  
Only use extensions provided free of  
charge by Ford Motor Company  
dealers. The dealer will provide an  
extension designed specifically for this  
vehicle, model year and seating position.  
The use of an extension intended for  
another vehicle, model year or seating  
position may not offer you the full  
protection of your vehicles seatbelt  
restraint system.  
Never use seatbelt extensions to  
install child restraints.  
Do not use a seatbelt extension with  
an inflatable seatbelt.  
Do not use extensions to change the  
fit of the belt across the torso, over  
the lap or to make the seatbelt  
buckle easier to reach.  
35  
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing