1996-2008 Ford Ka 2 Door Lighting -> Interior lamps User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lighting -> Interior lamps for Your Ford Ka 2 Door First Generation (1996-2008)

Lighting  
With the vehicle unloaded the control  
DIRECTION INDICATORS  
must be in position 0. With the vehicle  
partially or fully loaded, the headlamp  
beams should be levelled for road  
illumination of between 35 and 100  
m.  
HAZARD WARNING  
FLASHERS  
E68764  
INTERIOR LAMPS  
E68763  
A
Press the switch to turn on or off. The  
hazard warning flashers can also be  
operated when the ignition is off.  
B
C
E65992  
A
B
C
Door contact  
Off  
On  
Depending on the equipment fitted,  
with the switch in the position A.  
34  
Lighting  
the interior lamp illuminates when  
Never touch the glass of the bulbs.  
Fit only bulbs having a UV filter.  
Always replace a faulty bulb with a  
new one of the same type. After  
replacing a bulb, check that the lights  
operate correctly.  
a door or the luggage  
compartment is opened.  
the interior lamp illuminates when  
the central door locking system is  
deactivated.  
the interior lamp illuminates when  
the ignition is switched off.  
the interior lamp will stay on for a  
while after the doors are shut. It  
goes off after the ignition is turned  
on.  
Headlamps, side lamps  
Open the bonnet.  
Sportka  
(right hand side only)  
When parking your vehicle with the  
doors open for a long period of time,  
the interior lamp and the luggage  
compartment lamp are switched off  
automatically after 10 minutes.  
Turn the wheel to the right in  
order to provide access to the  
cover in the wheel arch trim panel.  
If the interior lamp is left in the  
position C, it will be switched off after  
30 minutes.  
To switch the lamp back on, switch  
on the ignition (position II) for a short  
time, open a door or press the unlock  
button of the remote control.  
CHANGING A BULB  
WARNING  
During operation, the bulbs and  
their surroundings get hot.  
Switch off the lights and let the bulbs  
cool down before replacing them.  
E68765  
Remove the screw 1.  
Pull the cover out of the two clips  
2.  
Always switch off lights and ignition  
before replacing any bulb.  
Follow the instructions in section  
Opening the headlight assembly.  
35  

Related Topics

Popular Owner Manuals