2009-2016 Ford Ka 2 Door QUICK START -> AUTO-START-STOP SYSTEM User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

QUICK START -> AUTO-START-STOP SYSTEM for Your Ford Ka 2 Door Second Generation (2009-2016)

603.95.157 PP KA EN 1ed trip 15-10-2010 13:49 Pagina 11  
OPERATING MODES  
Engine stopping mode  
With the vehicle stationary, the engine  
stops with the gearbox in neutral and  
the clutch pedal released.  
AUTO-START-STOP  
SYSTEM  
INTRODUCTION  
The Auto-Start-Stop device  
automatically stops the engine each time  
the vehicle is stationary and starts it  
again when the driver wants to resume  
driving.  
This improves the efficiency of the  
vehicle by reducing fuel consumption,  
the emission of harmful gases and noise  
pollution.  
A
Note The Auto-Start-Stop function  
is automatically turned off if the speed  
of 10 km/h is not exceeded for about  
2 seconds, to prevent the engine from  
being repeatedly stopped when driving  
at walking pace.  
KA00205m  
CONTROLS  
The engine being stopped is signalled  
by a symbol  
on the display.  
The system operates every time the car  
is started.  
FRONT FOG LIGHTS  
AND REAR FOG LAMPS  
(where provided)  
Engine restarting mode  
Note if climate comfort is to  
Depress the clutch pedal to restart  
the engine.  
be favoured, the Start&Stop system can  
be disabled, for a continuous operation  
of the climate control system.  
To turn on the front/rear fog lights,  
use the button A as follows:  
MANUAL ACTIVATION AND  
DEACTIVATION  
The device can be activated/deactivated  
1° Pressing: front fog lights on  
2° Pressing: rear fog lamps on  
3° Pressing: lights/lamps off.  
When the front fog lights are on,  
by the button  
in the dashboard  
(see “Controls” paragraph).  
the warning light  
turns on in  
5
the instrument panel; when the rear fog  
lamps are on, the warning light 4 turns  
on in the instrument panel.  
The front fog lights are activated when  
the dipped headlights are on.  
11  
603.95.157 PP KA EN 1ed trip 15-10-2010 13:49 Pagina 12  
ENGINE STOPPING FAILURE  
CONDITIONS  
With the device activated, for reasons  
of comfort, limiting emissions and  
safety, the engine does not stop in  
certain conditions, including:  
driver’s door not shut;  
SEATS  
driver’s seat belt not fastened;  
FRONT SEATS  
reverse gear engaged (for example,  
for parking manoeuvres);  
Fore/aft adjustment  
Lift lever A and push the seat forwards  
and backwards.  
automatic climate control is on and  
a comfortable temperature has not  
yet been reached or MAX – DEF  
function enabled;  
engine still cold;  
fault in the components or sensor of  
the Auto-Start-Stop system;  
Heated seats  
during the first period of use,  
to initialise the system.  
Press the button E to switch the  
function on/off.  
particularly cold outside  
temperatures, where the appropriate  
indication is provided;  
In the above cases, a message appears  
in the display and, where provided,  
the warning light blinks  
Backrest angle adjustment  
reduced braking system vacuum,  
e.g. following the brake pedal being  
pressed repeatedly;  
.
Turn knob B.  
Height adjustment  
battery not sufficiently charged;  
heated rear window activated;  
heated windshield;  
Operating lever C it is possible to lift  
or lower the rear area of the cushion  
to achieve the most comfortable driving  
position.  
windscreen wipers working at  
maximum speed for a long time;  
particulate filter regeneration  
in progress (diesel engines only);  
12  

Related Topics

Popular Owner Manuals