Maintenance
Topping up
Topping up
WARNINGS
WARNINGS
Only top up when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Only top up when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
Do not remove the filler cap when
the engine is running.
Do not remove the filler cap when
the engine is hot. Wait for the engine
to cool down.
Remove the filler cap.
CAUTION
Undiluted coolant is flammable and
may ignite if spilt on a hot exhaust.
Do not top up further than the MAX
mark.
CAUTIONS
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 149).
In an emergency, you can add just
water to the cooling system to reach
a vehicle service station. Have the
system checked by a properly trained
technician as soon as possible.
ENGINE COOLANT CHECK
Prolonged use of incorrect dilution of
the coolant can cause engine
damage from corrosion, overheating
or freezing.
Checking the coolant level
WARNING
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse
the affected areas immediately with
plenty of water and contact your doctor.
Unscrew the cap slowly. Any pressure
will escape slowly as you unscrew the
cap.
CAUTION
CAUTION
Do not top up further than the MAX
mark.
Make sure that the level is between
the MIN and the MAX marks.
Top up with a 50/50 mixture of coolant
and water using fluid that meets the Ford
specification. See Technical
Note: Coolant expands when it is hot.
The level may therefore extend beyond
the MAX mark.
specifications (page 149).
If the level is at the MIN mark, top up
immediately.
147
English 