Maintenance
2. Remove the three screws from the
headlamp assembly.
3. Carefully pull the headlamp assembly
as far as possible toward the front of
your vehicle to disengage it from the
lower fixing point.
4. Carefully lift the outer side of the
headlamp and remove it.
5. Disconnect the electrical connector.
CHANGING A BULB
WARNINGS
Switch the lamps and the ignition off.
2. Slightly rotate the wiper blade from the
wiper arm.
Let the bulb cool down before
removing it.
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
5. Install in the reverse order.
Note: Only fit bulbs of the correct
specification.
Note: Make sure that the wiper blade locks
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
into place.
Replace wiper blades at least once per
year for optimum performance.
Headlamp
Type 1
Poor wiper quality can be improved by
cleaning the wiper blades and the
windshield.
REMOVING A HEADLAMP
A
B
Low beam headlamp
High beam and daytime running
lamp
1. Make sure the lighting control is in the
off position and open the hood.
196
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing