2014-2022 Ford Mondeo 4 Door Lighting -> Changing a Bulb User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lighting -> Changing a Bulb for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Lighting  
Note: When fitting the headlamp, make  
sure that you fully engage the headlamp in  
the lower outer fixing point.  
Note: When fitting the headlamp, tighten  
the front screw first and then the rear screw.  
CHANGING A BULB  
WARNINGS  
Switch the lights and the ignition off.  
Let the bulb cool down before  
removing it.  
4. Carefully pull the corner of the grille  
and bumper towards the front of the  
vehicle.  
Have Xenon bulbs changed by a  
trained technician. There is a risk of  
electric shock.  
5. Carefully lift the corner of the  
headlamp and push it as far as possible  
towards the back of the vehicle.  
CAUTIONS  
Do not touch the glass of the bulb.  
Only fit bulbs of the correct  
specification. See Bulb  
Specification Chart (page 60).  
Note: The following instructions describe  
how to remove the bulbs. Fit replacements  
in the reverse order unless otherwise stated.  
Headlamp  
Note: Remove the covers to gain access to  
the bulbs.  
Direction indicator  
6. Carefully pull the headlamp towards  
the center of the vehicle, behind the  
grille and bumper, to disengage it from  
the lower outer fixing point.  
1. Remove the headlamp. See  
Removing a Headlamp (page 53).  
7. Remove the headlamp.  
CAUTION  
When fitting the headlamp, take care  
not to damage the locating points.  
54  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Lighting  
2. Turn the bulb holder counterclockwise  
and remove it.  
3. Remove the bulb.  
2. Turn the bulb holder counterclockwise  
and remove it.  
3. Gently press the bulb into the bulb  
holder, turn it counterclockwise and  
remove it.  
Cornering lamp  
1. Remove the headlamp. See  
Removing a Headlamp (page 53).  
Headlamp main beam  
1. Remove the headlamp. See  
Removing a Headlamp (page 53).  
2. Disconnect the electrical connector.  
3. Release the clip and remove the bulb.  
Daytime running lamps  
2. Disconnect the electrical connector.  
3. Release the clip and remove the bulb.  
Note: These are not serviceable items,  
please consult your dealer if they fail.  
Headlamp dipped beam  
1. Remove the headlamp. See  
Removing a Headlamp (page 53).  
55  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Lighting  
3. Remove the bulb.  
Approach lamp  
Note: Position the mirror glass as far  
inwards as possible.  
Side repeater  
1. Insert a screwdriver into the gap  
between the mirror housing and the  
mirror glass and release the metal  
retaining clip.  
1. Carefully remove the side repeater.  
2. Remove the lamp.  
3. Remove the bulb.  
2. Remove the bulb holder.  
56  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Lighting  
Front fog lamps  
Rear lamps  
Direction indicator  
1. Remove the trim panel.  
Note: You cannot separate the fog lamp  
bulb from the bulb holder.  
Note: Do not remove the screws.  
1. Loosen the screws.  
2. Remove the lamp.  
3. Disconnect the electrical connector.  
4. Turn the bulb holder counterclockwise  
and remove it.  
2. Turn the bulb holder counterclockwise  
and remove it.  
3. Gently press the bulb into the bulb  
holder, turn it counterclockwise and  
remove it.  
Rear and brake lamp  
Note: These are not serviceable items,  
please consult your dealer if they fail.  
57  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Lighting  
Reversing lamp and fog lamp  
License plate lamp  
1. Carefully release the spring clip.  
2. Remove the lamp.  
3. Remove the bulb.  
1. Remove the trim panel.  
Interior lamps  
Vehicles with LED lamps  
Note: These are not serviceable items,  
please consult your dealer if they fail.  
2. Turn the bulb holder counterclockwise  
and remove it.  
3. Gently press the bulb into the bulb  
holder, turn it counterclockwise and  
remove it.  
Central high mounted brake lamp  
Note: These are not serviceable items,  
please consult your dealer if they fail.  
58  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Lighting  
Vehicles without interior sensors  
Reading lamps  
Vehicles without interior sensors  
1. Carefully prise out the lens.  
2. Remove the lens.  
3. Remove the bulb.  
1. Carefully prise out the lens.  
2. Remove the lens.  
3. Remove the bulb.  
Vehicles with interior sensors  
Vehicles with interior sensors  
1. Carefully prise out the lens.  
2. Remove the lens.  
3. Remove the bulb.  
1. Carefully prise out the lamp.  
2. Turn the bulb holder counterclockwise  
and remove it.  
59  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  

Related Topics

Lighting
Lighting Control Autolamps Daytime Running Lamps Automatic High Beam Control Front Fog Lamps Rear Fog Lamps Headlamp Leveling Adaptive Headlamps Direction Indicators Interior Lamps Adjusting the Headlamps Hazard Warning Flashers Removing a Headlamp Bulb Specification Chart

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot