2014-2022 Ford Mondeo 4 Door Windows and Mirrors -> Blind Spot Information System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Windows and Mirrors -> Blind Spot Information System for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Windows and Mirrors  
The system is a convenience feature that  
AUTO-DIMMING MIRROR  
aids the driver in detecting vehicles that  
may have entered the blind spot zone (A).  
The detection area is on both sides of the  
vehicle extending rearwards from the  
exterior mirrors to approximately 3 meters  
(10 feet) beyond the bumper. The system  
will alert you if certain vehicles enter the  
blind spot zone whilst driving.  
The auto-dimming mirror will adjust  
automatically when hit by glaring light  
from behind. It will not work when you have  
selected reverse gear.  
BLIND SPOT INFORMATION  
SYSTEM  
Blind spot information system  
(BLIS)  
Using the system  
WARNINGS  
The system displays a yellow indicator  
The system is not designed to  
prevent contact with other vehicles  
or objects. The system only provides  
a warning to assist you in detecting  
vehicles in the blind spot zones. The  
system will not detect obstacles,  
pedestrians, motorcyclists or cyclists.  
located in the exterior mirrors.  
Do not use the system as a  
replacement for using the side and  
rear view mirrors, and looking over  
your shoulder before changing lanes. The  
system is not a replacement for careful  
driving and is only to be used as an aid.  
Note: Both indicators will illuminate briefly  
when you switch the ignition on to confirm  
that the system is operational.  
Note: On vehicles with automatic  
transmission, the system is active only in S,  
D and N.  
The system is only active when you exceed  
10 km/h (6 mph). The system is  
temporarily deactivated when you select  
reverse gear.  
66  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Windows and Mirrors  
Vehicles passing through the blind zone  
System detection and alerts  
at high speed.  
The system will trigger the alert for vehicles  
that enter the blind spot zone from the rear  
or merge from the side. Vehicles that you  
pass, or vehicles that enter the blind spot  
zone from the front, will only trigger the  
alert after the vehicle has remained in the  
blind spot zone for a short period of time.  
Note: Vehicles that pass through the blind  
zone quickly (typically less than 2 seconds)  
will not trigger the alert.  
Severe weather conditions.  
Several vehicles passing through the  
blind zone following each other closely.  
False alerts  
Note: False alerts are temporary and will  
self correct.  
There may be certain instances when the  
system will alert with no vehicle present in  
the blind zone.  
The system consists of two radar sensors  
each located behind the rear wheels  
hidden behind the bumpers.  
Circumstances where false alerts may  
occur:  
CAUTIONS  
Road guardrails.  
Highway concrete walls.  
Construction areas.  
Sharp turns around a building.  
Bushes and trees.  
Cyclists and motorcyclists.  
Do not place items such as bumper  
stickers in this area.  
Repairs to these areas using body filler  
will affect the performance of the  
system.  
Coming to a stop with a vehicle directly  
behind but very close.  
Turning the system on and off  
Note: The on or off position will remain until  
manually changed.  
You can turn the system on and off using  
the information display. See Information  
Displays (page 75).  
When you turn the system off no further  
alerts will be received. The BLIS warning  
indicator will illuminate. See Warning  
Lamps and Indicators (page 71).  
Detection limitations  
There may be certain instances where  
vehicles entering and exiting the blind spot  
zones may not be detected.  
Detection errors  
Note: The alert indicator in the mirror will  
not illuminate.  
Instances which may cause non-detection:  
Debris build up on the rear bumper  
panels in the area of the sensors.  
Certain manoeuvring of vehicles  
entering and exiting the blind zone.  
67  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Windows and Mirrors  
If the system senses a fault on either  
If the vehicle is fitted with a trailer tow  
module approved by us, the system will  
detect a connected trailer and deactivate.  
A confirmation message will be shown in  
the information display. See Information  
Messages (page 88). The BLIS warning  
indicator will illuminate. See Warning  
Lamps and Indicators (page 71).  
sensor, the system warning symbol will  
illuminate and remain on. The information  
display will confirm the fault and indicate  
whether the left or right side is affected.  
Blocked sensor  
WARNING  
Prior to the system recognizing a  
blocked condition and issuing a  
warning, the number of missed  
objects will increase.  
CAUTION  
The sensors may not detect vehicles  
in heavy rain or other conditions that  
cause disruptive reflections.  
Note: Keep the rear bumper area  
surrounding the sensors free from dirt, ice  
and snow.  
If a sensor becomes blocked the system  
performance may degrade. A blocked  
sensor message may be displayed.  
The system will automatically return to  
normal operation once two other vehicles  
have been detected on both sides.  
Trailer towing false alerts  
CAUTION  
Vehicles fitted with a trailer tow  
module not approved by us may not  
correctly be detected. Switch the  
system off to avoid false alerts. See  
Information Displays (page 75).  
68  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  

Related Topics

Popular Owner Manuals