Windows and Mirrors
Overriding the anti-trap function
Safety switch for rear windows
WARNING
CAUTION
While you close the window for the
third time, the anti-trap function is
disabled. Make sure there are no
On some vehicles, pressing the
switch will also lock the rear doors
from inside. See Child Safety
Locks (page 27).
obstacles in the way of the closing window.
To override this protection function when
there is a resistance, for example, in the
winter, proceed as follows:
Note: You can always operate the rear
windows from the driver’s door.
1. Close the window twice until it reaches
the resistance and let it reverse.
2. Close the window a third time to the
resistance. The anti-trap function is
disabled and you cannot close the
window automatically. The window
will override the resistance and you can
close it fully.
3. If the window does not close after the
third attempt, have it checked by a
properly trained technician.
A switch in the driver’s door disables the
Resetting the memory of the
rear power window switches.
power windows
The light in the switch illuminates and the
lights in the rear window switches go off
when the rear windows are disabled.
WARNING
The anti-trap function is deactivated
until you have reset the memory.
Anti-trap function
WARNING
After the battery has been disconnected
from the vehicle you must reset the
memory separately for each window:
1. Lift the switch until the window is fully
closed. Hold the switch lifted for one
more second.
Careless closing of the windows can
override the protection function and
cause injuries.
The power windows will stop
automatically while closing and reverse
some distance if there is an obstacle in the
way.
2. Release the switch and lift it again, two
or three times, for one more second.
3. Open the window and try to close it
automatically.
4. Reset and repeat procedure if the
window does not close automatically.
63
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
English 
