2019-2024 Ford Puma SUV Climate Control - Vehicles With: Automatic Temperature Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Climate Control - Vehicles With: Automatic Temperature Control for Your Ford Puma SUV 2019-2024

Climate Control - Vehicles With: Automatic TemperatureControlNote: When you switch maximum defrostSWITCHING CLIMATEon, the heated windshield, heated rearCONTROL ON AND OFFwindow and air conditioning turn on. Theblower motor is set to the highest the : When you switch maximum defrostoff, the heated windshield and heated rearwindow remain RECIRCULATEDSWITCHING MAXIMUMAIR ON AND OFFCOOLING ON AND OFFPress the button to recirculateair currently in the passengerPress the : Recirculated air may turn offNote: When you switch maximum coolingautomatically, or prevent you from switchingoff, air conditioning remains in all air flow modes except MAX A/C toreduce the risk of fogging. Recirculation maySWITCHING THE HEATEDalso turn on and off automatically in variousair distribution control combinations toWINDSHIELD ON AND OFFimprove heating or cooling the button to clear thewindshield of thin ice and AIRThe heated windshield turns offCONDITIONING ON AND OFFafter a short period of : Make sure that the engine is runningPress the switching the heated windshield : The system does not operate if theNote: Under certain conditions, the airbattery charge level is compressor could continue tooperate after you switch air conditioning THE HEATEDNote: To keep the system and itsREAR WINDOW ON AND OFFcomponents fully functional, switch airconditioning on and let your vehicle idle atleast once per month for a minimum of twoPress the button to clear the of thin ice and fog. Theheated rear window turns offafter a short period of MAXIMUMNote: Do not use harsh chemicals, razorDEFROST ON AND OFFblades or other sharp objects to clean orremove decals from the inside of the heatedPress the window as this could cause damage tothe heated rear window grid lines notcovered by the vehicle Warranty.136Puma (C
Climate Control - Vehicles With: Automatic Temperature
Control
Note: When you switch maximum defrost
SWITCHING CLIMATE
on, the heated windshield, heated rear
CONTROL ON AND OFF
window and air conditioning turn on. The
blower motor is set to the highest speed.
Press the button.
Note: When you switch maximum defrost
off, the heated windshield and heated rear
window remain on.
SWITCHING RECIRCULATED
SWITCHING MAXIMUM
AIR ON AND OFF
COOLING ON AND OFF
Press the button to recirculate
air currently in the passenger
Press the button.
compartment.
Note: Recirculated air may turn off
Note: When you switch maximum cooling
automatically, or prevent you from switching
off, air conditioning remains on.
on in all air flow modes except MAX A/C to
reduce the risk of fogging. Recirculation may
SWITCHING THE HEATED
also turn on and off automatically in various
air distribution control combinations to
WINDSHIELD ON AND OFF
improve heating or cooling efficiency.
Press the button to clear the
windshield of thin ice and fog.
SWITCHING AIR
The heated windshield turns off
CONDITIONING ON AND OFF
after a short period of time.
Note: Make sure that the engine is running
Press the button.
before switching the heated windshield on.
Note: The system does not operate if the
Note: Under certain conditions, the air
battery charge level is low.
conditioning compressor could continue to
operate after you switch air conditioning off.
SWITCHING THE HEATED
Note: To keep the system and its
REAR WINDOW ON AND OFF
components fully functional, switch air
conditioning on and let your vehicle idle at
least once per month for a minimum of two
Press the button to clear the rear
minutes.
window of thin ice and fog. The
heated rear window turns off
after a short period of time.
SWITCHING MAXIMUM
Note: Do not use harsh chemicals, razor
DEFROST ON AND OFF
blades or other sharp objects to clean or
remove decals from the inside of the heated
Press the button.
rear window as this could cause damage to
the heated rear window grid lines not
covered by the vehicle Warranty.
136
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Climate Control - Vehicles With: Automatic TemperatureControlTurn the temperature control clockwiseSETTING THE BLOWER MOTORfor warmer temperature : You can adjust the temperaturebetween 15.5–29.5°C (60–85°F).DIRECTING THE FLOW OF AIRNote: Lights on the control illuminate toindicate the blower motor AIR TO THEWINDSHIELD AIR VENTSSWITCHING THE HEATEDMIRRORS ON AND OFFWhen you switch the heated rear windowon, the heated exterior mirrors turn AIR TO THENote: Do not remove ice from the mirrorsINSTRUMENT PANEL AIR VENTSwith a scraper or adjust the mirror glasswhen it is frozen in : Do not clean the mirror housing orE244097glass with harsh abrasives, fuel or otherpetroleum-based cleaning products. Thevehicle warranty may not cover damageDIRECTING AIR TO THEcaused to the mirror housing or AIR VENTSSETTING THE TEMPERATUREE244098AUTO MODESWITCHING AUTO MODE ON ANDOFFPress the button to switch automode on. Repeatedly press thebutton to adjust auto : When you switch auto mode on,lights on the blower motor control do notilluminate to indicate the blower motorspeed.E244115Adjust the blower motor control or airdistribution control to switch auto modeTurn the temperature for cooler temperaturesettings.137Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Climate Control - Vehicles With: Automatic Temperature
Control
Turn the temperature control clockwise
SETTING THE BLOWER MOTOR
for warmer temperature settings.
SPEED
Note: You can adjust the temperature
between 15.5–29.5°C (60–85°F).
DIRECTING THE FLOW OF AIR
Note: Lights on the control illuminate to
indicate the blower motor speed.
DIRECTING AIR TO THE
WINDSHIELD AIR VENTS
SWITCHING THE HEATED
MIRRORS ON AND OFF
When you switch the heated rear window
on, the heated exterior mirrors turn on.
DIRECTING AIR TO THE
Note: Do not remove ice from the mirrors
INSTRUMENT PANEL AIR VENTS
with a scraper or adjust the mirror glass
when it is frozen in place.
Note: Do not clean the mirror housing or
E244097
glass with harsh abrasives, fuel or other
petroleum-based cleaning products. The
vehicle warranty may not cover damage
DIRECTING AIR TO THE
caused to the mirror housing or glass.
FOOTWELL AIR VENTS
SETTING THE TEMPERATURE
E244098
AUTO MODE
SWITCHING AUTO MODE ON AND
OFF
Press the button to switch auto
mode on. Repeatedly press the
button to adjust auto mode.
Note: When you switch auto mode on,
lights on the blower motor control do not
illuminate to indicate the blower motor
speed.
E244115
Adjust the blower motor control or air
distribution control to switch auto mode
Turn the temperature control
off.
counterclockwise for cooler temperature
settings.
137
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Climate Control - Vehicles With: Automatic TemperatureControlAUTO MODE INDICATORSThe indicators are on the Auto Mode IndicatorDescriptionStatusOne indicator illumin-The blower motor speed is reduced. Use this setting the amount of noise from the blower motor. Thissetting increases the time taken to cool the indicators illumin-The blower motor speed is indicators illumin- The blower motor speed is increased. Use this setting the time taken to cool the interior. This settingincreases the amount of noise from the blower Climate ControlCLIMATE CONTROL HINTS•Adjusting the settings when yourvehicle interior is extremely hot or coldGeneral Hintsis not necessary. Automatic mode isbest recommended to maintain set•Prolonged use of recirculated air the windows to fog up.•The system adjusts to heat or cool the•You may feel a small amount of airinterior to the temperature you selectfrom the footwell air vents regardlessas quickly as the air distribution setting.•For the system to function efficiently,•To reduce humidity build-up inside yourthe instrument panel and side air ventsvehicle, do not drive with the systemshould be fully off or with recirculated airalways switched on.•If you press AUTO during cold outsidetemperatures, the system directs air•Do not place objects under the frontflow to the windshield and side windowseats as this may interfere with theair addition, the blower motorairflow to the rear run at a slower speed until the•Remove any snow, ice or leaves fromengine warms air intake area at the base of the•If you press AUTO during and the inside of the•To improve the time to reach avehicle is hot, the system usescomfortable temperature in hotrecirculated air to maximize interiorweather, drive with the windows opencooling. Blower motor speed may alsountil you feel cold air th
Climate Control - Vehicles With: Automatic Temperature
Control
AUTO MODE INDICATORS
The indicators are on the Auto Mode
button.
Auto Mode Indicator
Description
Status
One indicator illumin-
The blower motor speed is reduced. Use this setting to
ated.
minimize the amount of noise from the blower motor. This
setting increases the time taken to cool the interior.
Two indicators illumin-
The blower motor speed is moderate.
ated.
Three indicators illumin- The blower motor speed is increased. Use this setting to
ated.
reduce the time taken to cool the interior. This setting
increases the amount of noise from the blower motor.
Automatic Climate Control
CLIMATE CONTROL HINTS
•
Adjusting the settings when your
vehicle interior is extremely hot or cold
General Hints
is not necessary. Automatic mode is
best recommended to maintain set
•
Prolonged use of recirculated air may
temperature.
cause the windows to fog up.
•
The system adjusts to heat or cool the
•
You may feel a small amount of air
interior to the temperature you select
from the footwell air vents regardless
as quickly as possible.
of the air distribution setting.
•
For the system to function efficiently,
•
To reduce humidity build-up inside your
the instrument panel and side air vents
vehicle, do not drive with the system
should be fully open.
switched off or with recirculated air
always switched on.
•
If you press AUTO during cold outside
temperatures, the system directs air
•
Do not place objects under the front
flow to the windshield and side window
seats as this may interfere with the
air addition, the blower motor
airflow to the rear seats.
may run at a slower speed until the
•
Remove any snow, ice or leaves from
engine warms up.
the air intake area at the base of the
•
If you press AUTO during hot
windshield.
temperatures and the inside of the
•
To improve the time to reach a
vehicle is hot, the system uses
comfortable temperature in hot
recirculated air to maximize interior
weather, drive with the windows open
cooling. Blower motor speed may also
until you feel cold air through the air
reduce until the air cools.
vents.
Quickly Heating the Interior
1.
Press AUTO.
138
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Climate Control - Vehicles With: Automatic TemperatureControl2. Adjust the temperature function to thesetting you Settings forHeating1. Press AUTO.2. Adjust the temperature function to thesetting you prefer. Use 22°C (72°F) asa starting point, then adjust the settingas Cooling the Interior1. Press MAX A/C.2. Drive with the windows open for a shortperiod of Settings forCooling1. Press AUTO.2. Adjust the temperature function to thesetting you prefer. Use 22°C (72°F) asa starting point, then adjust the settingas the Side Windows inCold and release defrost or maximumdefrost.2. Adjust the temperature control to thesetting you prefer. Use 22°C (72°F) asa starting point, then adjust the settingas necessary.139Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Climate Control - Vehicles With: Automatic Temperature
Control
2. Adjust the temperature function to the
setting you prefer.
Recommended Settings for
Heating
1. Press AUTO.
2. Adjust the temperature function to the
setting you prefer. Use 22°C (72°F) as
a starting point, then adjust the setting
as necessary.
Quickly Cooling the Interior
1. Press MAX A/C.
2. Drive with the windows open for a short
period of time.
Recommended Settings for
Cooling
1. Press AUTO.
2. Adjust the temperature function to the
setting you prefer. Use 22°C (72°F) as
a starting point, then adjust the setting
as necessary.
Defogging the Side Windows in
Cold Weather
1.
Press and release defrost or maximum
defrost.
2. Adjust the temperature control to the
setting you prefer. Use 22°C (72°F) as
a starting point, then adjust the setting
as necessary.
139
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Switching Climate Control On and Off Setting the Temperature Auto Mode

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot