Get Lane Keeping System Guide for Ford Puma SUV 2019-2024

Intelligent Speed Limiter

WHAT IS THE INTELLIGENT

INTELLIGENT SPEED LIMITER

SPEED LIMITER

PRECAUTIONS

Intelligent speed limter is a driving aid that

limits the vehicle speed to the maximum

WARNING: When you are going

speed limit detected by the speed sign

downhill, your vehicle speed could

recognition system.

increase above the set speed. The

system does not apply the brakes.

HOW DOES THE INTELLIGENT

WARNING: You are responsible for

SPEED LIMITER WORK

controlling your vehicle at all times. The

system is designed to be an aid and does

The system allows you to limit the vehicle

not relieve you of your responsibility to

speed to the maximum speed limit

drive with due care and attention. Failure

detected by the speed sign recognition

to follow this instruction could result in

system. For example, if the speed sign

the loss of control of your vehicle,

recognition system detects a 80 km/h

personal injury or death.

(50 mph) speed limit, the vehicle speed is

limited to 80 km/h (50 mph). You can

temporarily exceed the set speed if

SWITCHING THE INTELLIGENT

required, for example to overtake.

SPEED LIMITER ON AND OFF -

The controls are on the steering wheel.

VEHICLES WITHOUT: LANE

A warning appears in the instrument

CENTERING

cluster display if any of the following occur:

• The vehicle speed exceeds the current

Press to switch the system on.

set speed.

The system activates with the

• The system detects a maximum speed

detected speed-limit or, if no

limit that is lower than the current

speed-limit is detected, the current vehicle

vehicle speed.

speed as the set speed. Press again to

switch the system off.

• You intentionally exceed the set speed.

• You unintentionally exceed the set

speed, for example when you are going

SWITCHING THE INTELLIGENT

downhill.

SPEED LIMITER ON AND OFF -

Note: The system does not limit the vehicle

VEHICLES WITH: LANE

speed to speed limits shown with a

CENTERING

supplementary traffic sign in the instrument

cluster display.

Press to switch the system on.

The system activates with the

detected speed-limit or, if no

speed-limit is detected, the current vehicle

speed as the set speed. Press again with

the system in standby mode to switch the

system off.

278

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Intelligent Speed Limiter

4. Select Intelligent.

SETTING THE SPEED LIMIT

5. Select Tolerance.

Press the toggle button upward

6. Select a setting and press the OK

E246884

or downward with the system in

button.

standby mode to set the speed

limiter to the current vehicle

E246885

ADJUSTING THE SPEED LIMIT

speed. The set speed is stored

and displayed in the instrument

TOLERANCE - VEHICLES WITH:

cluster display.

12.3 INCH INSTRUMENT

Note: The set speed limiter adjusts when

CLUSTER DISPLAY SCREEN/

the system detects a different maximum

SYNC 2.5

speed limit.

Note: If the system cannot detect a

You can set a permanent speed tolerance

maximum speed limit, the system returns

that is in addition to the detected speed

to standby mode.

limit.

Press the menu button on the steering

CHANGING THE SET SPEED

wheel to enter the instrument cluster

LIMIT

display main menu.

Select Settings.

You can adjust the set speed in

Select Driver assistance.

E246884

small or large increments. Press

the toggle button upward or

Select Speed limiter.

downward once to adjust the set

Select Intelligent.

E246885

speed in small increments. Press

Select Tolerance.

and hold the toggle button

upward or downward to adjust the set

Select a setting and press the OK

speed in large increments.

button.

ADJUSTING THE SPEED LIMIT

TOLERANCE - VEHICLES WITH:

SYNC 3

4.2 INCH INSTRUMENT

CLUSTER DISPLAY SCREEN/

You can set a permanent speed tolerance

SYNC 2.5

that is in addition to the detected speed

limit.

You can set a permanent speed tolerance

Press Settings on the touchscreen.

that is in addition to the detected speed

Press Driver Assistance.

limit.

Press Speed Limiter.

Using the instrument cluster display

controls on the steering wheel, select

Press Intelligent.

Settings.

Press Tolerance.

2. Select Driver assistance.

Select a setting and press the OK

3. Select Speed limiter.

button.

279

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Intelligent Speed Limiter

CANCELING THE SET SPEED

INTELLIGENT SPEED LIMITER

LIMIT - VEHICLES WITHOUT:

INDICATORS

LANE CENTERING

It illuminates in the instrument

cluster display when you switch

Press to cancel the set speed

the system on.

limiter. The system returns to

standby mode.

It illuminates grey if the system is in

standby mode.

Note: The system does not limit the vehicle

speed in standby mode.

INTELLIGENT SPEED LIMITER

CANCELING THE SET SPEED

AUDIBLE WARNINGS

LIMIT - VEHICLES WITH: LANE

A tone sounds if:

CENTERING

• You unintentionally exceed the set

Press to cancel the set speed

speed, for example when you are going

limiter. The system returns to

downhill.

standby mode.

• You continue to exceed the set speed.

Note: The system does not limit the vehicle

• The speed sign recognition system

speed in standby mode.

detects a speed limit outside the

operational speed range, a tone sounds

and the system returns to standby

RESUMING THE SET SPEED

mode.

LIMIT

SWITCHING FROM

Press to resume the set speed

limiter. The system sets the

INTELLIGENT SPEED LIMITER

speed limiter to the detected

TO SPEED LIMITER - VEHICLES

maximum speed limit at the time it

WITH: 4.2 INCH INSTRUMENT

resumes.

CLUSTER DISPLAY SCREEN/

SYNC 2.5

INTENTIONALLY EXCEEDING

THE SET SPEED LIMIT

You can change between intelligent speed

limiter and normal speed limiter using the

Firmly press the accelerator pedal to

instrument cluster display. Intelligent

temporarily exceed the set speed limit.

speed limiter allows you to limit the vehicle

The system resumes when the vehicle

speed to the maximum speed limit

speed drops below the set speed limit, or

detected by the speed sign recognition

when you press the RES button.

system. Normal speed limiter allows you

to manually limit the vehicle speed using

If you intentionally exceed the set speed,

controls on the steering wheel.

a warning appears in the instrument cluster

display.

Using the instrument cluster display

controls on the steering wheel, select

Settings.

280

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Intelligent Speed Limiter

2. Select Driver assistance.

SWITCHING FROM

3. Select Speed limiter.

INTELLIGENT SPEED LIMITER

4. Switch Intelligent off.

TO SPEED LIMITER - VEHICLES

Note: If you switch intelligent speed limiter

WITH: SYNC 3

off, the system defaults to manual speed

limiter. You can manually set the speed

You can change between intelligent speed

limiter using the controls on the steering

limiter and normal speed limiter using the

wheel.

center display. Intelligent speed limiter

allows you to limit the vehicle speed to the

maximum speed limit detected by the

SWITCHING FROM

speed sign recognition system. Normal

INTELLIGENT SPEED LIMITER

speed limiter allows you to manually limit

TO SPEED LIMITER - VEHICLES

the vehicle speed using controls on the

steering wheel.

WITH: 12.3 INCH INSTRUMENT

1. Press Settings on the touchscreen.

CLUSTER DISPLAY SCREEN/

2. Press Driver Assistance.

SYNC 2.5

3. Press Speed Limiter.

You can change between intelligent speed

4. Switch Intelligent off.

limiter and normal speed limiter using the

Note: If you switch intelligent speed limiter

instrument cluster display. Intelligent

off, the system defaults to manual speed

speed limiter allows you to limit the vehicle

limiter. You can manually set the speed

speed to the maximum speed limit

limiter using the controls on the steering

detected by the speed sign recognition

wheel.

system. Normal speed limiter allows you

to manually limit the vehicle speed using

controls on the steering wheel.

INTELLIGENT SPEED LIMITER

Press the menu button on the steering

– TROUBLESHOOTING

wheel to enter the instrument cluster

display main menu.

INTELLIGENT SPEED LIMITER –

2. Select Settings.

FREQUENTLY ASKED QUESTIONS

3. Select Driver assistance.

Why does a warning appear in the

4. Select Speed limiter.

instrument cluster display?

5. Select Normal or Intelligent.

• The vehicle speed exceeds the current

Note: If you switch intelligent speed limiter

set speed.

off, the system defaults to manual speed

• The system detects a maximum speed

limiter. You can manually set the speed

limit that is lower than the current

limiter using the controls on the steering

vehicle speed.

wheel.

• You intentionally exceed the set speed.

281

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

$Lane Keeping SystemWHAT IS THE LANE KEEPINGLANE KEEPING SYSTEMSYSTEMPRECAUTIONSThe lane keeping system is a driving aiddesigned to provide temporary steeringWARNING: You are responsible forassistance or steering wheel vibrationcontrolling your vehicle at all times. Thewhen it detects an unintended lanesystem is designed to be an aid and relieve you of your responsibility todrive with due care and attention. FailureHOW DOES THE LANEto follow this instruction could result inthe loss of control of your vehicle,KEEPING SYSTEM WORKpersonal injury or system is designed to alert you byWARNING: The system may notproviding temporary steering assistancefunction if the sensor is steering wheel vibration when it detectsan unintended lane departure. The systemWARNING: The sensor maydetects and tracks the road lane markingsincorrectly track lane markings as otherusing a camera mounted behind thestructures or objects. This can result ininterior mirror. When you switch thea false or missed on, a graphic of lane markingsappears in the instrument cluster : In cold and severeweather conditions the system may notfunction. Rain, snow and spray can alllimit sensor : Large contrasts inoutside lighting can limit : The system will notE313922operate if the sensor cannot track theNote: The system works when the cameraroad lane detect at least one lane marking or theedge of the : If damage occurs in theimmediate area surrounding the sensor,have your vehicle checked as soon : The system may notcorrectly operate if your vehicle is fittedwith a suspension kit not approved byus.282Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing$

Lane Keeping System

WHAT IS THE LANE KEEPING

LANE KEEPING SYSTEM

SYSTEM

PRECAUTIONS

The lane keeping system is a driving aid

designed to provide temporary steering

WARNING: You are responsible for

assistance or steering wheel vibration

controlling your vehicle at all times. The

when it detects an unintended lane

system is designed to be an aid and does

departure.

not relieve you of your responsibility to

drive with due care and attention. Failure

HOW DOES THE LANE

to follow this instruction could result in

the loss of control of your vehicle,

KEEPING SYSTEM WORK

personal injury or death.

The system is designed to alert you by

WARNING: The system may not

providing temporary steering assistance

function if the sensor is blocked.

or steering wheel vibration when it detects

an unintended lane departure. The system

WARNING: The sensor may

detects and tracks the road lane markings

incorrectly track lane markings as other

using a camera mounted behind the

structures or objects. This can result in

interior mirror. When you switch the

a false or missed warning.

system on, a graphic of lane markings

appears in the instrument cluster display.

WARNING: In cold and severe

weather conditions the system may not

function. Rain, snow and spray can all

limit sensor performance.

WARNING: Large contrasts in

outside lighting can limit sensor

performance.

WARNING: The system will not

E313922

operate if the sensor cannot track the

Note: The system works when the camera

road lane markings.

can detect at least one lane marking or the

edge of the road.

WARNING: If damage occurs in the

immediate area surrounding the sensor,

have your vehicle checked as soon as

possible.

WARNING: The system may not

correctly operate if your vehicle is fitted

with a suspension kit not approved by

us.

282

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System

LANE KEEPING SYSTEM

SWITCHING THE LANE

LIMITATIONS

KEEPING SYSTEM ON AND

OFF

The system only operates when the vehicle

speed is greater than approximately

65 km/h (40 mph).

The system may not correctly operate in

any of the following conditions:

• The system does not detect at least

one lane marking or the edge of the

road.

• You switch the turn signals on.

• You apply direct steering, accelerate

fast or brake hard.

• The vehicle speed is less than 65 km/h

E270719

(40 mph).

Press the button on the turn signal stalk.

• The anti-lock brake, stability control or

traction control system activates.

SWITCHING THE LANE

• Narrow lane width.

KEEPING SYSTEM MODE -

The system may not correct lane

positioning in any of the following

VEHICLES WITH: 4.2 INCH

conditions:

INSTRUMENT CLUSTER

• High winds.

DISPLAY SCREEN

• Uneven road surfaces.

• Heavy or uneven loads.

Using the instrument cluster display

controls on the steering wheel, select

• Incorrect tire pressure.

Settings.

Select Driver assistance.

Select Lane keeping system.

Select Mode.

Select a setting and press the OK

button.

283

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System

HOW DOES ALERT MODE WORK

SWITCHING THE LANE

KEEPING SYSTEM MODE -

VEHICLES WITH: 12.3 INCH

INSTRUMENT CLUSTER

DISPLAY SCREEN

Press the menu button on the steering

wheel to enter the instrument cluster

display main menu.

Select Settings.

Select Driver assistance.

E165515

Select Lane keeping system.

Select Mode.

When in alert mode, the lane keeping

system alerts you by vibrating the steering

Select a setting and press the OK

wheel if it detects an unintended lane

button.

departure.

LANE KEEPING SYSTEM

ADJUSTING THE STEERING

SETTINGS

WHEEL VIBRATION INTENSITY -

VEHICLES WITH: 4.2 INCH

You can select one of the three modes in

INSTRUMENT CLUSTER DISPLAY

the instrument cluster display:

SCREEN

• Alert mode.

Using the instrument cluster display

• Aid mode.

controls on the steering wheel, select

• Alert and aid mode.

Settings.

Note: The system remembers the last

2. Select Driver assistance.

mode when you start your vehicle. If the

3. Select Lane keeping system.

system detects a MyKey, the mode is set to

4. Select Intensity.

alert.

5. Select a setting and press the OK

button.

ALERT MODE

Note: This setting does not affect the aid

mode.

WHAT IS ALERT MODE

Alert mode provides steering wheel

vibration when it detects an unintended

lane departure.

284

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System

ADJUSTING THE STEERING

The lane keeping system aids you when

WHEEL VIBRATION INTENSITY -

an unintentional lane departure occurs.

VEHICLES WITH: 12.3 INCH

The system provides a small steering input

INSTRUMENT CLUSTER DISPLAY

to move your vehicle towards the center

SCREEN

of the lane.

Note: When aid mode is on and the system

Press the menu button on the steering

does not detect any steering activity for a

wheel to enter the instrument cluster

short period of time, for example lightly

display main menu.

holding the steering wheel, the system alerts

2. Select Settings.

you to put your hands on the steering wheel.

3. Select Driver assistance.

Note: The aid mode becomes active again

after you have returned your vehicle to the

4. Select Lane keeping system.

center of the lane.

5. Select Intensity.

6. Select a setting and press the OK

ALERT AND AID MODE

button.

Note: This setting does not affect the aid

WHAT IS ALERT AND AID MODE

mode.

Alert and aid mode combines both, alert

AID MODE

mode and aid mode.

WHAT IS AID MODE

HOW DOES ALERT AND AID MODE

WORK

Aid mode provides temporary steering

assistance toward the center of the lane.

Alert and aid mode provides temporary

steering assistance toward the lane center

when the system detects an unintended

HOW DOES AID MODE WORK

lane departure. If your vehicle continues

drifting out of the lane, the steering wheel

vibrates.

E165516

285

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System

LANE KEEPING SYSTEM

INDICATORS - VEHICLES

WITH: 12.3 INCH INSTRUMENT

CLUSTER DISPLAY SCREEN

E165517

Alert.

E294544

Aid.

Note: The diagram illustrates general zone

coverage. It does not provide exact zone

parameters.

LANE KEEPING SYSTEM

INDICATORS - VEHICLES

When you switch the system on, a graphic

WITH: 4.2 INCH INSTRUMENT

of lane markings appears in the instrument

cluster display.

CLUSTER DISPLAY SCREEN

The lane markings illuminate green or

It illuminates in the instrument

white if the system is available.

E251020

cluster display when you switch

The lane markings illuminate grey if the

the system on and aid mode or

system is unavailable.

alert and aid mode are selected.

The lane markings do not display if the

It illuminates in the instrument

system is off.

cluster display when you switch

the system on and alert mode is

BLIND SPOT ASSIST

selected.

WHAT IS BLIND SPOT ASSIST

Blind spot assist is an extension of the lane

keeping system that provides a blind spot

warning and steering assistance during

lane changes if it detects adjacent vehicles.

286

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System

HOW DOES BLIND SPOT ASSIST

BLIND SPOT ASSIST LIMITATIONS

WORK

All system limitations present in the basic

lane keeping system also apply to blind

spot assist.

Blind spot assist does not function under

the following conditions:

•

When none or only one of the two lane

markings are detected.

•

One or both rear radar sensors become

blocked or faulty.

•

A trailer is attached to your vehicle.

Note: Bike carriers and cargo racks could

E270719

cause false alerts due to obstruction of the

sensor. We recommend switching the

Activate and deactivate the system using

feature off when using a bike carrier or a

the lane keeping system button on the turn

cargo rack.

signal stalk.

Note: The system does not recognize the

During lane changes, the design of the

trailer, if you attach a trailer without

blind spot assist detects vehicles in, or

electrical connectors. We recommend to

approaching, your blind spot and provides

switch off blind spot assist if you attach a

a warning, plus steering assistance to

trailer without electrical connectors.

direct your vehicle back into your lane.

Blind spot assist could have difficulty

When active, this system functions with or

detecting hazards under the following

without the use of turn signals and hazard

conditions:

flashers.

• If a vehicle is approaching in an

You must keep your hands on the steering

adjacent lane at a relative speed much

wheel at all times.

higher than your vehicle.

• Bad weather conditions are present

that obstruct the sensors.

287

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Lane Keeping System for Your Ford Puma SUV 2019-2024

Related Topics

Popular Owner Manuals

Latest Owner Manuals