2019-2024 Ford Puma SUV MyKey? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MyKey? for Your Ford Puma SUV 2019-2024

MyKey™Driving and Parking AidsWHAT IS MYKEYParking aids, blind spot information systemMyKey allows you to program keys withand cross traffic alert turn on when yourestricted settings to promote good drivingstart the engine and cannot be with a -collision assist and lane keeping alertMYKEY SETTINGSturn on when you start the engine, but canbe switched off with a -CONFIGURABLE MYKEYSelectable Drive ModesSETTINGS - EXCLUDING: STYou cannot select some drive modes whenSeatbelt Reminderusing a audio system mutes when the seatbeltTraction Control and Stabilityreminder turns on. The seatbelt reminderControlcannot be switched off with a cannot switch traction control orEarly Low Fuelstability control off when using a low fuel level warning lamp turns MYKEYSETTINGSDriving and Parking AidsYou can configure the following settingsParking aids, blind spot information systemafter creating a MyKey. See Creating aand cross traffic alert turn on when youMyKey (page 56).start the engine and cannot be switchedoff with a LimitPre-collision assist and lane keeping alertturn on when you start the engine, but canbe switched off with a : Do not set MyKeymaximum speed limit to a limit that willprevent the driver from maintaining aNON-CONFIGURABLE MYKEYsafe speed considering posted speedSETTINGS - STlimits and prevailing road conditions. Thedriver is always responsible to drive inSeatbelt Reminderaccordance with local laws andThe audio system mutes when the seatbeltprevailing conditions. Failure to do soreminder turns on. The seatbelt remindercould result in accident or be switched off with a can set a speed limit for your Low FuelWarning messages appear in theinformation display and a tone sounds ifThe low fuel level warning lamp turns onyour vehicle reaches the set speed. override the set speed when usinga MyKey.55Puma (CF7
MyKey™
Driving and Parking Aids
WHAT IS MYKEY
Parking aids, blind spot information system
MyKey allows you to program keys with
and cross traffic alert turn on when you
restricted settings to promote good driving
start the engine and cannot be switched
habits.
off with a MyKey.
Pre-collision assist and lane keeping alert
MYKEY SETTINGS
turn on when you start the engine, but can
be switched off with a MyKey.
NON-CONFIGURABLE MYKEY
Selectable Drive Modes
SETTINGS - EXCLUDING: ST
You cannot select some drive modes when
Seatbelt Reminder
using a MyKey.
The audio system mutes when the seatbelt
Traction Control and Stability
reminder turns on. The seatbelt reminder
Control
cannot be switched off with a MyKey.
You cannot switch traction control or
Early Low Fuel
stability control off when using a MyKey.
The low fuel level warning lamp turns on
earlier.
CONFIGURABLE MYKEY
SETTINGS
Driving and Parking Aids
You can configure the following settings
Parking aids, blind spot information system
after creating a MyKey. See Creating a
and cross traffic alert turn on when you
MyKey (page 56).
start the engine and cannot be switched
off with a MyKey.
Speed Limit
Pre-collision assist and lane keeping alert
turn on when you start the engine, but can
be switched off with a MyKey.
WARNING: Do not set MyKey
maximum speed limit to a limit that will
prevent the driver from maintaining a
NON-CONFIGURABLE MYKEY
safe speed considering posted speed
SETTINGS - ST
limits and prevailing road conditions. The
driver is always responsible to drive in
Seatbelt Reminder
accordance with local laws and
The audio system mutes when the seatbelt
prevailing conditions. Failure to do so
reminder turns on. The seatbelt reminder
could result in accident or injury.
cannot be switched off with a MyKey.
You can set a speed limit for your vehicle.
Early Low Fuel
Warning messages appear in the
information display and a tone sounds if
The low fuel level warning lamp turns on
your vehicle reaches the set speed. You
earlier.
cannot override the set speed when using
a MyKey.
55
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™Speed Reminder5. Press and hold the OK button until aconfirmation message appears in theYou can set a speed reminder for yourinformation . Warning messages appear in the6. Switch the ignition display and a tone sounds ifyour vehicle exceeds the set : We recommend that you label System Volume LimitCREATING A MYKEY -The audio system maximum volume isreduced. A message appears in theVEHICLES WITH: 12.3 INCHinformation display if you attempt toINSTRUMENT CLUSTERexceed the volume limit. Automaticvolume control turns SCREEN/SYNC 2.5/KEYED IGNITIONEmergency AssistanceIf you set emergency assistance to the ignition on using an adminalways on, it cannot be switched off withkey.a MyKey.2. Press the menu button on the steeringwheel to enter the information displayDo Not Disturbmain you set do not disturb to be always on,3. Select cannot be switched off with a MyKey.4. Select and Stability Control5. Select Create MyKey.6. Press and hold the OK button until aIf you set traction control or stabilityconfirmation message appears in thecontrol to be always on, you cannot switchinformation off with a MyKey.7. Switch the ignition A MYKEY -Note: We recommend that you label WITH: 4.2 INCHINSTRUMENT CLUSTERCREATING A MYKEY -DISPLAY SCREEN/SYNC 2.5/VEHICLES WITH: SYNC 3/KEYED IGNITIONKEYED the ignition on using an the ignition on using an .2. Using the information display Settings on the the steering wheel, select Settings.3.Press Vehicle.3. Select MyKey.4.Press MyKey.4. Select Create MyKey.5.Press Create MyKey.6.Switch the ignition off.56Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™
Speed Reminder
5. Press and hold the OK button until a
confirmation message appears in the
You can set a speed reminder for your
information display.
vehicle. Warning messages appear in the
6. Switch the ignition off.
information display and a tone sounds if
your vehicle exceeds the set speed.
Note: We recommend that you label this
key.
Audio System Volume Limit
CREATING A MYKEY -
The audio system maximum volume is
reduced. A message appears in the
VEHICLES WITH: 12.3 INCH
information display if you attempt to
INSTRUMENT CLUSTER
exceed the volume limit. Automatic
volume control turns off.
DISPLAY SCREEN/SYNC 2.5/
KEYED IGNITION
Emergency Assistance
If you set emergency assistance to be
1.
Switch the ignition on using an admin
always on, it cannot be switched off with
key.
a MyKey.
2. Press the menu button on the steering
wheel to enter the information display
Do Not Disturb
main menu.
If you set do not disturb to be always on,
3. Select Settings.
it cannot be switched off with a MyKey.
4. Select MyKey.
Traction and Stability Control
5. Select Create MyKey.
6. Press and hold the OK button until a
If you set traction control or stability
confirmation message appears in the
control to be always on, you cannot switch
information display.
it off with a MyKey.
7. Switch the ignition off.
CREATING A MYKEY -
Note: We recommend that you label this
key.
VEHICLES WITH: 4.2 INCH
INSTRUMENT CLUSTER
CREATING A MYKEY -
DISPLAY SCREEN/SYNC 2.5/
VEHICLES WITH: SYNC 3/
KEYED IGNITION
KEYED IGNITION
1.
Switch the ignition on using an admin
1.
Switch the ignition on using an admin
key.
key.
2. Using the information display controls
2.
Press Settings on the touchscreen.
on the steering wheel, select Settings.
3.
Press Vehicle.
3. Select MyKey.
4.
Press MyKey.
4. Select Create MyKey.
5.
Press Create MyKey.
6.
Switch the ignition off.
56
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™Note: We recommend that you label thisCREATING A MYKEY - WITH: 12.3 INCHINSTRUMENT CLUSTERCREATING A MYKEY -DISPLAY SCREEN/PUSHVEHICLES WITH: 4.2 INCHBUTTON START/SYNC 2.5INSTRUMENT CLUSTERDISPLAY SCREEN/PUSHBUTTON START/SYNC 2.5112E24538621.Remove the rubber mat, and if yourvehicle has a wireless charger, removeE245386that too.1. Remove the rubber mat.2. Place the admin key in the positionshown, with the buttons facing upward.2. Place the admin key in the positionshown, with the buttons facing upward.3. Switch the ignition on.3. Switch the ignition on.4. Press the menu button on the steeringwheel to enter the instrument cluster4. Using the information display controlsdisplay main the steering wheel, select Settings.5. Select Settings.5. Select MyKey.6. Select MyKey.6. Select Create MyKey.7. Select Create MyKey.7. Press and hold the OK button until aconfirmation message appears in the8. Press and hold the OK button until ainformation message appears in theinformation display.8. Switch the ignition off.9. Switch the ignition : We recommend that you label : We recommend that you label thiskey.57Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™
Note: We recommend that you label this
CREATING A MYKEY -
key.
VEHICLES WITH: 12.3 INCH
INSTRUMENT CLUSTER
CREATING A MYKEY -
DISPLAY SCREEN/PUSH
VEHICLES WITH: 4.2 INCH
BUTTON START/SYNC 2.5
INSTRUMENT CLUSTER
DISPLAY SCREEN/PUSH
BUTTON START/SYNC 2.5
1
1
2
E245386
2
1.
Remove the rubber mat, and if your
vehicle has a wireless charger, remove
E245386
that too.
1. Remove the rubber mat.
2. Place the admin key in the position
shown, with the buttons facing upward.
2. Place the admin key in the position
shown, with the buttons facing upward.
3. Switch the ignition on.
3. Switch the ignition on.
4. Press the menu button on the steering
wheel to enter the instrument cluster
4. Using the information display controls
display main menu.
on the steering wheel, select Settings.
5. Select Settings.
5. Select MyKey.
6. Select MyKey.
6. Select Create MyKey.
7. Select Create MyKey.
7. Press and hold the OK button until a
confirmation message appears in the
8. Press and hold the OK button until a
information display.
confirmation message appears in the
information display.
8. Switch the ignition off.
9. Switch the ignition off.
Note: We recommend that you label this
key.
Note: We recommend that you label this
key.
57
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™4. Select a setting and press the OKCREATING A MYKEY - WITH: SYNC 3/5. Configure the BUTTON START6. Switch the ignition A MYKEY -1VEHICLES WITH: 12.3 INCHINSTRUMENT CLUSTERDISPLAY SCREEN/SYNC 2.5You can only program MyKeys to the samesettings.21.Switch the ignition on using an the menu button on the steering1. Remove the rubber to enter the information displaymain menu.2. Place the admin key in the positionshown, with the buttons facing upward.3.Select Settings.3. Switch the ignition on.4.Select MyKey.4. Press Settings on the touchscreen.5.Select a setting and press the OKbutton.5. Press Vehicle.6.Configure the setting.6. Press MyKey.7.Switch the ignition off.7. Press Create MyKey.8. Switch the ignition A MYKEY -Note: We recommend that you label thisVEHICLES WITH: SYNC 3key.You can only program MyKeys to the samePROGRAMMING A MYKEY - WITH: 4.2 the ignition on using an adminINSTRUMENT SCREEN/SYNC 2.52.Press Settings on the touchscreen.3.Press can only program MyKeys to the .5.Select a setting and press the the ignition on using an .6.Configure the setting.2. Using the information display controlson the steering wheel, select Settings.7.Switch the ignition off.3. Select MyKey.58Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™
4. Select a setting and press the OK
CREATING A MYKEY -
button.
VEHICLES WITH: SYNC 3/
5. Configure the setting.
PUSH BUTTON START
6. Switch the ignition off.
PROGRAMMING A MYKEY -
1
VEHICLES WITH: 12.3 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN/SYNC 2.5
You can only program MyKeys to the same
settings.
2
1.
Switch the ignition on using an admin
key.
E245386
2.
Press the menu button on the steering
1. Remove the rubber mat.
wheel to enter the information display
main menu.
2. Place the admin key in the position
shown, with the buttons facing upward.
3.
Select Settings.
3. Switch the ignition on.
4.
Select MyKey.
4. Press Settings on the touchscreen.
5.
Select a setting and press the OK
button.
5. Press Vehicle.
6.
Configure the setting.
6. Press MyKey.
7.
Switch the ignition off.
7. Press Create MyKey.
8. Switch the ignition off.
PROGRAMMING A MYKEY -
Note: We recommend that you label this
VEHICLES WITH: SYNC 3
key.
You can only program MyKeys to the same
PROGRAMMING A MYKEY -
settings.
VEHICLES WITH: 4.2 INCH
1.
Switch the ignition on using an admin
INSTRUMENT CLUSTER
key.
DISPLAY SCREEN/SYNC 2.5
2.
Press Settings on the touchscreen.
3.
Press Vehicle.
You can only program MyKeys to the same
4.
Press MyKey.
settings.
5.
Select a setting and press the OK
1.
Switch the ignition on using an admin
button.
key.
6.
Configure the setting.
2. Using the information display controls
on the steering wheel, select Settings.
7.
Switch the ignition off.
3. Select MyKey.
58
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™CLEARING ALL MYKEYS -CLEARING ALL MYKEYS -VEHICLES WITH: 4.2 INCHVEHICLES WITH: SYNC 3INSTRUMENT CLUSTERWhen you clear all MyKeys, you remove allDISPLAY SCREEN/SYNC 2.5restrictions and return all MyKeys to theiroriginal admin key you clear all MyKeys, you remove the ignition on using an adminrestrictions and return all MyKeys to admin key status.2.Press Settings on the touchscreen.1.Switch the ignition on using an adminkey.3.Press Vehicle.2.Using the information display the steering wheel, select Settings.5.Press Clear all MyKeys.3.Select MyKey.4.Select Clear MYKEY and hold the OK button until aSTATUS - VEHICLES WITH: 4.2confirmation message appears in theINCH INSTRUMENT CLUSTERinformation SCREEN/SYNC 2.5CLEARING ALL MYKEYS -You can find information about theVEHICLES WITH: 12.3 INCHdistance traveled using a MyKey and alsothe number of admin keys and MyKeysINSTRUMENT CLUSTERcreated for your SCREEN/SYNC 2.51. Switch the ignition you clear all MyKeys, you remove all2. Using the information display controlsrestrictions and return all MyKeys to theiron the steering wheel, select admin key status.3. Select MyKey.1.Switch the ignition on using an admin4. Select MyKey .2.Press the menu button on the steeringCHECKING MYKEY SYSTEMwheel to enter the information displaySTATUS - VEHICLES WITH: 12.3main INSTRUMENT SCREEN/SYNC 2.54.Select MyKey.5.Select Clear can find information about and hold the OK button until adistance traveled using a MyKey and alsoconfirmation message appears in thethe number of admin keys and MyKeysinformation for your vehicle.1.Switch the ignition on.59Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™
CLEARING ALL MYKEYS -
CLEARING ALL MYKEYS -
VEHICLES WITH: 4.2 INCH
VEHICLES WITH: SYNC 3
INSTRUMENT CLUSTER
When you clear all MyKeys, you remove all
DISPLAY SCREEN/SYNC 2.5
restrictions and return all MyKeys to their
original admin key status.
When you clear all MyKeys, you remove all
1.
Switch the ignition on using an admin
restrictions and return all MyKeys to their
key.
original admin key status.
2.
Press Settings on the touchscreen.
1.
Switch the ignition on using an admin
key.
3.
Press Vehicle.
2.
Using the information display controls
4.
Press MyKey.
on the steering wheel, select Settings.
5.
Press Clear all MyKeys.
3.
Select MyKey.
4.
Select Clear MyKeys.
CHECKING MYKEY SYSTEM
5.
Press and hold the OK button until a
STATUS - VEHICLES WITH: 4.2
confirmation message appears in the
INCH INSTRUMENT CLUSTER
information display.
DISPLAY SCREEN/SYNC 2.5
CLEARING ALL MYKEYS -
You can find information about the
VEHICLES WITH: 12.3 INCH
distance traveled using a MyKey and also
the number of admin keys and MyKeys
INSTRUMENT CLUSTER
created for your vehicle.
DISPLAY SCREEN/SYNC 2.5
1. Switch the ignition on.
When you clear all MyKeys, you remove all
2. Using the information display controls
restrictions and return all MyKeys to their
on the steering wheel, select Settings.
original admin key status.
3. Select MyKey.
1.
Switch the ignition on using an admin
4. Select MyKey info.
key.
2.
Press the menu button on the steering
CHECKING MYKEY SYSTEM
wheel to enter the information display
STATUS - VEHICLES WITH: 12.3
main menu.
INCH INSTRUMENT CLUSTER
3.
Select Settings.
DISPLAY SCREEN/SYNC 2.5
4.
Select MyKey.
5.
Select Clear MyKeys.
You can find information about the
6.
Press and hold the OK button until a
distance traveled using a MyKey and also
confirmation message appears in the
the number of admin keys and MyKeys
information display.
created for your vehicle.
1.
Switch the ignition on.
59
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™2. Press the menu button on the steering1. Switch the ignition to enter the information display2. Press Settings on the menu.3. Press Vehicle.3. Select Settings.4. Press MyKey.4. Select MyKey.5. Press MyKey Information.5. Select MyKey MYKEY WITH REMOTECHECKING MYKEY SYSTEMSTART SYSTEMSSTATUS - VEHICLES WITH:SYNC 3The system is not compatible withnon-Ford remote start can find information about thedistance traveled using a MyKey and alsothe number of admin keys and MyKeyscreated for your – TROUBLESHOOTINGMYKEY – INFORMATION MESSAGES - VEHICLES WITH: KEYED IGNITIONMessageDescriptionKey is already a MyKeyDisplays when trying to create a MyKey with a key alreadydesignated as a restricted at nextDisplays to confirm that the key is restricted after you switchstart. Label this keythe ignition off.60Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MyKey™
2. Press the menu button on the steering
1. Switch the ignition on.
wheel to enter the information display
2. Press Settings on the touchscreen.
main menu.
3. Press Vehicle.
3. Select Settings.
4. Press MyKey.
4. Select MyKey.
5. Press MyKey Information.
5. Select MyKey info.
USING MYKEY WITH REMOTE
CHECKING MYKEY SYSTEM
START SYSTEMS
STATUS - VEHICLES WITH:
SYNC 3
The system is not compatible with
non-Ford remote start systems.
You can find information about the
distance traveled using a MyKey and also
the number of admin keys and MyKeys
created for your vehicle.
MYKEY – TROUBLESHOOTING
MYKEY – INFORMATION MESSAGES - VEHICLES WITH: KEYED IGNITION
Message
Description
Key is already a MyKey
Displays when trying to create a MyKey with a key already
designated as a MyKey.
Key restricted at next
Displays to confirm that the key is restricted after you switch
start. Label this key
the ignition off.
60
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Popular Owner Manuals